I did lspci & nothing shows up ...
but an unspecified Belkin device actually shows up
under the hardware list under unknown devices.
I tried lspci after modprobing the said drivers but
nothing changed.
I then did a hardware report via Yast ... of course
Belkin is mentioned a million times .. so here is some
Yast-Info :
HWClassList=00000040000010
Features=0x2
UniqueID=2UT6.0GdnqWQ3B+2
ParentID=k4bc.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=new
Available=no
Needed=no
Active=unknown
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0
SysfsBusID=1-3:1.0
Hotplug=4
The above is shown a few times in the report .
And something else :
57: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: wkjR.0GdnqWQ3B+2
Parent ID: k4bc.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0
SysFS BusID: 1-5:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no,
active=unknown
Attached to: #56 (Hub)
So both above are mentioned each maybe at least 4
times every time with very similiar "numbers".
Sorry .. full list of "Belkin" mentionses :
HWClassList=00000040000010
Features=0x2
UniqueID=2UT6.0GdnqWQ3B+2
ParentID=k4bc.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=new
Available=no
Needed=no
Active=unknown
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0
SysfsBusID=1-3:1.0
Hotplug=4
HWClassList=00000008010000
Res.Baud=0,0,0,0x00,0x00
UniqueID=4zpN.0GdnqWQ3B+2
ParentID=uIhY.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=no
Available=yes
Needed=no
Active=yes
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb3/3-5/3-5:1.0
SysfsBusID=3-5:1.0
Hotplug=4
HWClassList=00000008010000
Res.Baud=0,0,0,0x00,0x00
UniqueID=ADDn.0GdnqWQ3B+2
ParentID=k4bc.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=new
Available=no
Needed=no
Active=unknown
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0
SysfsBusID=1-1:1.0
Hotplug=4
HWClassList=00000008000010
Res.Baud=0,0,0,0x00,0x00
UniqueID=KRJj.0GdnqWQ3B+2
ParentID=uIhY.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=no
Available=no
Needed=no
Active=yes
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb3/3-1/3-1:1.0
SysfsBusID=3-1:1.0
Hotplug=4
HWClassList=20000008000000
Res.Baud=0,0,0,0x00,0x00
UniqueID=wkjR.0GdnqWQ3B+2
ParentID=k4bc.qji2yEO2H98
HWClass=unknown
Model=Belkin Unclassified device
Configured=no
Available=yes
Needed=no
Active=unknown
Bus=0x86
VendorID=u050d
DeviceID=7050
VendorName=Belkin Components
RevisionName=2.02
SysfsID=/devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0
SysfsBusID=1-5:1.0
Hotplug=4
57: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: wkjR.0GdnqWQ3B+2
Parent ID: k4bc.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0
SysFS BusID: 1-5:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no,
active=unknown
Attached to: #56 (Hub)
71: USB 00.0: 0000 Unclassified device
[Created at manual.278]
Unique ID: 2UT6.0GdnqWQ3B+2
Parent ID: k4bc.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 0 bps
Config Status: cfg=new, avail=no, need=no,
active=unknown
Attached to: #56 (Hub)
84: USB 00.0: 0000 Unclassified device
[Created at manual.278]
Unique ID: 4zpN.0GdnqWQ3B+2
Parent ID: uIhY.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb3/3-5/3-5:1.0
SysFS BusID: 3-5:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 0 bps
Config Status: cfg=no, avail=no, need=no, active=yes
Attached to: #100 (Hub)
86: USB 00.0: 0000 Unclassified device
[Created at manual.278]
Unique ID: ADDn.0GdnqWQ3B+2
Parent ID: k4bc.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 0 bps
Config Status: cfg=new, avail=no, need=no,
active=unknown
Attached to: #56 (Hub)
87: USB 00.0: 0000 Unclassified device
[Created at manual.278]
Unique ID: KRJj.0GdnqWQ3B+2
Parent ID: uIhY.qji2yEO2H98
SysFS ID:
/devices/pci0000:00/0000:00:02.2/usb3/3-1/3-1:1.0
SysFS BusID: 3-1:1.0
Hardware Class: unknown
Model: "Belkin Unclassified device"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x7050
Revision: "2.02"
Speed: 0 bps
Config Status: cfg=no, avail=no, need=no, active=yes
Attached to: #100 (Hub)
--- Winston Graeme
Many thanks 4 reply .. Ill give it a try .. a tiny poem :-)
.............
Hi Winston,
I think Belkin uses Ralink chipsets. Verify that by doing a "lspci". If so, load the modules by hand "modprobe rt2400" or rt2500 or rt2570 Look at "dmesg" for any messages...if one of the modules find the device: fine, try a "ifconfig XXX 10.20.30.40 up" (substitute XXX by the devicename from the dmesg output)
-- mdc
___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com