Mailinglist Archive: opensuse (4398 mails)
| < Previous | Next > |
Re: [SLE] DVD drive not recognised on 64 bit.
- From: "Adam Vazquez Kb2jpd Internet Mobile w/ Treo" <adamvaz@xxxxxxxxxxxxx>
- Date: Tue, 20 Sep 2005 14:15:00 -0400
- Message-id: <E1EHmfF-00031z-HT@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
How do your drives jumpered on the ide cable? If they are drive select, change them to master/slave and check that the right module is talking to them.
Sometimes it happens. Sometimes I just hang one drive per controller and that problem is solved that way.
What does the dmesg output say about the ide controllers and the drives? How about the lsmod?
When you finally get it working, what does the lsmod say?
Adam
-----Original Message-----
From: michael norman <michaeltnorman@xxxxxxxxx>
Subj: [SLE] DVD drive not recognised on 64 bit.
Date: Tue Sep 20, 2005 8:48 am
Size: 742 bytes
To: suse-linux-e@xxxxxxxx
Hi all
I have just rebuilt my pc with an AMD Athlon 64 bit cpu on an Abit AV8 mb (VIA
K8T800 chip). Using ethier the 32 or 64 bit version of 9.3 the and the same
DVD drives (DVD on hdc and DVDRW on hdd) as before there is a failure to
recognise the first drive once the machine is booted up. If I run system
repair on reboot it is fixed but the recognition does not usually survive a
reboot. I have checked the caable connections and they are OK. Anybody any
ideas as to the cause of the problem please ?
Mike
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx
Sometimes it happens. Sometimes I just hang one drive per controller and that problem is solved that way.
What does the dmesg output say about the ide controllers and the drives? How about the lsmod?
When you finally get it working, what does the lsmod say?
Adam
-----Original Message-----
From: michael norman <michaeltnorman@xxxxxxxxx>
Subj: [SLE] DVD drive not recognised on 64 bit.
Date: Tue Sep 20, 2005 8:48 am
Size: 742 bytes
To: suse-linux-e@xxxxxxxx
Hi all
I have just rebuilt my pc with an AMD Athlon 64 bit cpu on an Abit AV8 mb (VIA
K8T800 chip). Using ethier the 32 or 64 bit version of 9.3 the and the same
DVD drives (DVD on hdc and DVDRW on hdd) as before there is a failure to
recognise the first drive once the machine is booted up. If I run system
repair on reboot it is fixed but the recognition does not usually survive a
reboot. I have checked the caable connections and they are OK. Anybody any
ideas as to the cause of the problem please ?
Mike
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx
| < Previous | Next > |