Mailinglist Archive: opensuse (2441 mails)

< Previous Next >
Trying to get my SCSI to work
  • From: "J. Scott Thayer, M.D." <docscott@xxxxxxx>
  • Date: Sun, 26 Jun 2005 22:06:23 -0400
  • Message-id: <200506262206.23441.docscott@xxxxxxx>
The following is what hwinfo reports. It shows that I have a SCSI controller.
It appears that it is not configured. My thought is that the wrong driver was
selected during my install since this worked just fine under 8.0. I have 2
Jaz drives connected to the controller. I would appreciate any help I can get
here. SCSI is briefly mentioned in dmesg, just saying it is configured but I
doubt that since there is no mention of the connected drives and there was
under 8.0. Thanks.


19: PCI 0a.0: 0100 SCSI storage controller
[Created at pci.273]
Unique ID: bSAa.8Wc+vtM+OBC
SysFS ID: /devices/pci0000:00/0000:00:0a.0
SysFS BusID: 0000:00:0a.0
Hardware Class: storage
Model: "Advanced ASC1300 SCSI Adapter"
Vendor: pci 0x10cd "Advanced System Products, Inc"
Device: pci 0x1300 "ABP940-U / ABP960-U"
SubVendor: pci 0x10cd "Advanced System Products, Inc"
SubDevice: pci 0x1310 "ASC1300 SCSI Adapter"
Revision: 0x03
I/O Ports: 0xdc00-0xdcff (rw)
Memory Range: 0xdf000000-0xdf0000ff (rw,non-prefetchable)
Memory Range: 0x00000000-0x0000ffff (ro,prefetchable,disabled)
IRQ: 11 (576 events)
Config Status: cfg=no, avail=yes, need=no, active=unknown

< Previous Next >
Follow Ups