Mailinglist Archive: opensuse (3349 mails)

[Ronald Wiplinger <ronald@xxxxxxxxx>]

Ken Schneider wrote:

> On Thu, 2005-05-12 at 00:48 +0800, Ronald Wiplinger wrote:
>  
>
> > I have installed SuSE 9.2 pro on an Athlon with IDE hard disk.
> >
> > I got some problems with my motherboard Gigabyte GA-K8NXP-9
> >
> > 1. my USB memory stick is not recognized:
> >
> >    
> Did you by chance update the kernel and forget to reboot? It has
> happened to the best of us.
>
>  

Reboot helped a lot, .... (I did not recognize that with the first 
update also the kernel was updated)
Floppy and USB are recognized now.

However the Ethernet port eth0 is mentioned in the dmesg, but not used

190:forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
192:eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
--
219-(C)Copyright 1999-2004 Marvell(R).
220-PCI: Setting latency timer of device 0000:02:00.0 to 64
221:eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller
222-      PrefPort:A  RlmtMode:Check Link State
223-ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000fea56008bef3e]
--
233-ip_conntrack version 2.1 (4095 buckets, 32760 max) - 480 bytes per conntrack
234-ip6_conntrack version 0.1 (4095 buckets, 32760 max) - 312 bytes per conntrack
235:eth1: network connection up using port A
236-    speed:           100
237-    autonegotiation: yes
--
242-    rx-polling:      enabled
243-Disabled Privacy Extensions on device 000001003be66800(sit0)
244:eth1: no IPv6 routers present
245-PCI: Setting latency timer of device 0000:00:04.0 to 64
246-intel8x0_measure_ac97_clock: measured 49924 usecs
--
266:eth1: -- ERROR --
267-        Class:  Hardware failure
268-        Nr:  0x271
--
305:eth0: no link during initialization.
306:eth0: no IPv6 routers present
307-PCI: Setting latency timer of device 0000:00:04.0 to 64



bye

Ronald