Mailinglist Archive: opensuse (2912 mails)

[hokshy <hokshy@xxxxxxxx>]

Hi

I have a adsl modem (vitelcom) and I have tried to configure in suse9.0
with cxacru driver.
The cuestion is, I have downloaded driver, I compile it, and I set up
it. Following the instructions of driver documentation, I have followed
this steps:
1- I configure file /etc/cxacru.
2- I configure file /etc/ppp/options.
3- I create file /etc/ppp/peers/dsl-provider
4- Run conexion with /usr/sbin/cxstart.sh and I obtain:

>>> Inits Conexant AccessRunner <<<
>>> Loading firmware...
>>> Loading driver...
>>> Setting PPPoE <<<
>>> Loading br2684 kernel module...
>>> Loading ppp_generic...
>>> Loading pppoe...
>>> Loading br2684ctl...
>>> Activating interface...
>>> Activating send/receive data...
>>> Loading pppd daemon...
Plugin pppoe.so loaded.
PPPoE Plugin Initialized

I look /var/log/messages and I look that something is bad:

resmgr[741]: accepted connection from user root
cxioctl: resmgr: server response code 200
resmgr[741]: disconnect from root
RFC1483/2684 bridge: Interface "nas0" created sucessfully 
RFC1483/2684 bridge: Communicating over ATM 0.8.35, encapsulation: LLC 
kernel: atm_connect (TX: cl 1,bw 0-0,sdu 1524; RX: cl 1,bw 0-0,sdu
1524,AAL 5)
RFC1483/2684 bridge: Interface configured
RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started 
/etc/hotplug/net.agent[1225]: No HW description found ... exiting
pppd[1252]: Plugin pppoe.so loaded.
pppd[1252]: PPPoE Plugin Initialized
pppd[1252]: pppd 2.4.1 started by root, uid 0
pppd[1252]: Using interface ppp0
pppd[1252]: Connect: ppp0 <--> /dev/tty1
kernel: nas0: no IPv6 routers present
pppd[1252]: LCP: timeout sending Config-Requests 
pppd[1252]: Connection terminated.
pppd[1252]: Exit.

I say, something is bad, because in the same computer, I have done the
same operation
with other distribution (kernel-2.6.8) and the modem running ok.
In /var/log/messages of the other distribution, I obtain:

RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.8.35, encapsulation: LLC
RFC1483/2684 bridge: Interface configured
RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
pppd[5477]: Plugin rp-pppoe.so loaded.
sioux pppd[5477]: RP-PPPoE plugin version 3.3 compiled against pppd
2.4.2
kernel: NET: Registered protocol family 17
pppd[5480]: pppd 2.4.2 started by root, uid 0
pppd[5480]: PPP session is 2058
pppd[5480]: Using interface ppp0
pppd[5480]: Connect: ppp0 <--> nas0
pppd[5480]: Couldn't increase MTU to 1500
pppd[5480]: Couldn't increase MRU to 1500
pppd[5480]: Couldn't increase MRU to 1500
pppd[5480]: CHAP authentication succeeded

Have somebody the modem vitelcom in suse?

Sorry for my english.

-- 
hokshy <hokshy@xxxxxxxx>