Mailinglist Archive: opensuse (3964 mails)

[Paul Hewlett <hewlett@xxxxxxxxxxxxxxx>]

On Saturday 20 November 2004 07:01, Peter B Van Campen wrote:
> On Friday 19 November 2004 8:08 pm, Paul Cartwright wrote:
> > On Saturday 20 November 2004 7:53 pm, Marc Christensen wrote:
> > > Strange there isnt a Yast module for lm_sensors...
> >
> > I'll confirm that for 9.2, I did run the sensor-detect, clicked OK..
> > and ok.. and ok..

>

I have started lm_sensors successfully. When I run the 'sensors command I get

w83697hf-isa-0290
Adapter: ISA adapter
VCore:     +1.59 V  (min =  +1.72 V, max =  +1.89 V)              
+3.3V:     +3.35 V  (min =  +3.14 V, max =  +3.48 V)              
+5V:       +5.09 V  (min =  +4.77 V, max =  +5.25 V)              
+12V:     +11.81 V  (min = +10.84 V, max = +13.21 V)              
-12V:     -12.50 V  (min = -13.16 V, max = -10.77 V)              
-5V:       -5.08 V  (min =  -5.23 V, max =  -4.73 V)              
V5SB:      +5.65 V  (min =  +4.77 V, max =  +5.25 V)              
VBat:      +1.48 V  (min =  +2.40 V, max =  +3.60 V)              
fan1:     2657 RPM  (min = 2657 RPM, div = 2)              ALARM  
fan2:        0 RPM  (min =    0 RPM, div = 2)                     
temp1:       +39°C  (high =  +127°C)                     sensor = thermistor           
temp2:     +39.0°C  (high =   +80°C, hyst =   +80°C)   sensor = PII/Celeron 
diode           
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm disabled

eeprom-i2c-2-51
Adapter: SiS96x SMBus adapter at 0x1400
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256

eeprom-i2c-2-50
Adapter: SiS96x SMBus adapter at 0x1400
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256


Note that my VCore, V5SB,VBat and fan1 seem to be out of range.
Is this serious ?

Regards Paul
-- 
Paul Hewlett (Linux #359543)  Email:`echo az.oc.evitcaten@ttelweh | rev`
Tel: +27 21 852 8812       Cel  : +27 72 719 2725       FAX: +27 866720563
--