Hello all, I have this config : PRODUCT: SuSE Linux I386 9.1 Professional Hardware : Ibm xSeries 235 Bios version : 7.10.18 Hardrive : IBM 32P0731 (6 disks, 2 with raid 1 and 3 with raid 5) with hardware raid controller ( IBM ServeRAID-6M firmware version : 7.10.18) I get this error in my logs : ----------- Error : -------------------- Nov 22 12:32:16 dumbo kernel: Symbols match kernel version 2.6.5. Nov 22 12:32:16 dumbo kernel: No module symbols loaded - kernel modules not enabled. Nov 22 12:37:16 dumbo kernel: mptscsih: ioc0: >> Attempting task abort! (sc=c5731380) Nov 22 12:37:16 dumbo kernel: mptscsih: ioc0: >> Attempting target reset! (sc=c5731380) Nov 22 12:37:16 dumbo kernel: mptscsih: ioc0: >> Attempting bus reset! (sc=c5731380) Nov 22 12:37:26 dumbo kernel: mptscsih: ioc0: >> Attempting host reset! (sc=c5731380) Nov 22 12:37:26 dumbo kernel: mptbase: Initiating ioc0 recovery Nov 22 12:39:50 dumbo kernel: SCSI Error: (0:0:0) Status=02h (CHECK CONDITION) Nov 22 12:39:50 dumbo kernel: Key=8h (BLANK CHECK); FRU=00h Nov 22 12:39:50 dumbo kernel: ASC/ASCQ=00h/05h "" Nov 22 12:39:50 dumbo kernel: CDB: 08 01 00 00 01 00 - "READ(6)" Nov 22 12:39:50 dumbo kernel: Nov 22 12:57:50 dumbo -- MARK -- Nov 22 12:59:00 dumbo /USR/SBIN/CRON[8842]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly) --- End of error ---------- I think I have a problem because the firmware version of the RAID controller is newer than the version of the driver of the kernel. How can I check which version of the serverraid driver is in the kernel ? Should I wait for the next kernel upgrade ? The IBM tool told me that versions mismatch. I don't know if it is the cause of the scsi errors but it could be. Someone has any hint about this ? Thank you -- Christophe