Mailinglist Archive: opensuse (3996 mails)
| < Previous | Next > |
Setting Up DSL Connection (BellSouth)
- From: Don Parris <webdev@xxxxxxxxxxxxx>
- Date: Wed, 01 Sep 2004 08:14:22 -0400
- Message-id: <4135BD1E.2080501@xxxxxxxxxxxxx>
O.k. gang,
I got the BellSouth DSL service I mentioned previously. I'm running SUSE 8.0 Pro. The DSL modem (router) is a Westell modell and I'm using the ethernet connector. SUSE apparently sees it and sets it up as dsl0 at boot time.
(1) Ran Yast - activated personal firewall, set Dial-On-Demand, set DNS addresses, and using PPPOe
(2) Username & password are correct.
(3) Do I need to setup routing also?
Here's the connection attempt:
Selection of new interface/provider "dsl0"/"DSL provider" succeeded.
Starting connection. (2004-09-01 07:58:43 EDT)
pppd: Plugin pppoe.so loaded.
pppd: PPPoE Plugin Initialized
pppd: Plugin passwordfd.so loaded.
pppd: Using interface ppp0
pppd: Couldn't increase MTU to 1500.
pppd: Setting MTU to 1492.
pppd: Couldn't increase MRU to 1500
pppd: local IP address 192.168.99.1
pppd: remote IP address 192.168.99.99
Reloading configuration.
pppd: Starting link
Establishing connection due to activity.
pppd: Sending PADI
Waiting for PADO. Please check your setup and try again.
Stopping connection. (2004-09-01 08:04:37 EDT)
pppd: Terminating on signal 15.
We are disconnected. (2004-09-01 08:04:39 EDT)
pppd died: non-normal exit
I got the BellSouth DSL service I mentioned previously. I'm running SUSE 8.0 Pro. The DSL modem (router) is a Westell modell and I'm using the ethernet connector. SUSE apparently sees it and sets it up as dsl0 at boot time.
(1) Ran Yast - activated personal firewall, set Dial-On-Demand, set DNS addresses, and using PPPOe
(2) Username & password are correct.
(3) Do I need to setup routing also?
Here's the connection attempt:
Selection of new interface/provider "dsl0"/"DSL provider" succeeded.
Starting connection. (2004-09-01 07:58:43 EDT)
pppd: Plugin pppoe.so loaded.
pppd: PPPoE Plugin Initialized
pppd: Plugin passwordfd.so loaded.
pppd: Using interface ppp0
pppd: Couldn't increase MTU to 1500.
pppd: Setting MTU to 1492.
pppd: Couldn't increase MRU to 1500
pppd: local IP address 192.168.99.1
pppd: remote IP address 192.168.99.99
Reloading configuration.
pppd: Starting link
Establishing connection due to activity.
pppd: Sending PADI
Waiting for PADO. Please check your setup and try again.
Stopping connection. (2004-09-01 08:04:37 EDT)
pppd: Terminating on signal 15.
We are disconnected. (2004-09-01 08:04:39 EDT)
pppd died: non-normal exit
| < Previous | Next > |