Mailinglist Archive: opensuse (5100 mails)

< Previous Next >
Re: [SLE] SuSE 9.1 problem - can't use/find DVD
  • From: Johan Nielsen <yep@xxxxxxxxxxxxxx>
  • Date: Mon, 14 Jun 2004 18:36:59 +0200
  • Message-id: <200406141836.59815.yep@xxxxxxxxxxxxxx>

Sorry watching a game of football football here dk - it

watch in the
/media

folder - I just did surprise .... nothing ;-)

OK .... if you put the SuSE DVD in it (9.1)

and cd to that folder maybe that is also some "hot-shit" service.

any change for you ??

Can happen that some update killed the normal dvd-entries

on my P4 system there is a dvdrecorder entry

but the old P2 system says cdrecorder so the DVD entry is missing now
(it a DVD-rom /CD R/RW)


Mandag 14 juni 2004 18:09 skrev Mike Pelley:
> Okay, what that gives me is below. It is only seeing the DVD-RW on
> IDE0. Suggestion for next step?
>
> helios:/dev # hwinfo --cdrom
> 21: IDE 00.0: 10602 CD-ROM (DVD-RAM)
> [Created at block.194]
> Unique ID: Fffu.gJIVw+mggn4
> Parent ID: 3p2J.O6c5iGu01+9
> SysFS ID: /block/hda
> SysFS BusID: 0.0
> SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
> Hardware Class: cdrom
> Model: "HL-DT-ST DVDRAM GSA-4040B"
> Vendor: "HL-DT-ST"
> Device: "DVDRAM GSA-4040B"
> Revision: "A301"
> Serial ID: "K1F3B6H1827"
> Driver: "PIIX IDE", "ide-cdrom"
> Device File: /dev/hda
> Device Number: block 3:0
> Features: CD-R, CD-RW, DVD, DVD-R, DVDRAM
> Size: 0 sectors a 512 bytes
> Drive status: no medium
> Config Status: cfg=yes, avail=yes, need=no, active=unknown
> Attached to: #10 (IDE interface)
> Drive Speed: 32
>
> Johan Nielsen wrote:
> >try
> >
> >$ hwinfo --cdrom
> >
> >
> >or --all or reallyall
> >
> >Johan
> >
> >Mandag 14 juni 2004 17:54 skrev Mike Pelley:
> >>Hi All!
> >>
> >>I just found a problem with SuSE 9.1 and my installation: I can't use
> >>the DVD-ROM on my second IDE channel. The info from the various logs
> >>and /proc is included below. I've swapped my DVD-RW on IDE0 with it,
> >>and it works fine. So, I doubt that it is the device (it burns find,
> >>too!). It shows up in the BIOS. Note the difference for IDE0 under
> >> /proc.
> >>
> >>If I try to mount /dev/hdc:
> >>helios:/ # mount /dev/hdc /media/cdrom/
> >>mount: /dev/hdc is not a valid block device
> >>
> >>
> >>helios:/ # grep Pioneer /var/log/boot.msg
> >><4>hdc: Pioneer DVD-ROM ATAPIModel DVD-114 0110, ATAPI CD/DVD-ROM drive
> >>
> >>and proc shows:
> >>
> >>helios:/ # cat /proc/ide/ide1/hdc/model
> >>Pioneer DVD-ROM ATAPIModel DVD-114 0110
> >>
> >>helios:/ # cat /proc/ide/ide1/hdc/driver
> >>ide-default version 0.9.newide <--IDE0 reports "ide-cdrom version 4.61"
> >>
> >>helios:/ # cat /proc/ide/ide1/hdc/settings
> >>name value min max
> >>mode
> >>---- ----- --- ---
> >>----
> >>current_speed 0 0 70
> >> rw ide-scsi 0 0 1
> >> rw init_speed 0 0 70
> >> rw io_32bit 0 0 3
> >> rw keepsettings 0 0 1
> >> rw nice1 1 0 1
> >> rw number 2 0 3
> >> rw pio_mode write-only 0
> >> 255 w unmaskirq 0 0
> >> 1 rw using_dma 0 0
> >> 1 rw
> >>
> >>
> >>Any suggestions?
> >>
> >>Thanks!
> >>
> >>Cheers,
> >>Mike
> >>mike at pelleys dot com

< Previous Next >