From the system long on the 6807 --- May 30 23:06:39 linux91 kernel: Linux Kernel Card Services May 30 23:06:39 linux91 kernel: options: [pci] [cardbus] [pm] May 30 23:06:39 linux91 kernel: PCI: IRQ 11 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask May 30 23:06:39 linux91 kernel: PCI: Found IRQ 11 for device 0000:00:0a.0 May 30 23:06:39 linux91 kernel: PCI: Sharing IRQ 11 with 0000:00:10.1 May 30 23:06:39 linux91 kernel: Yenta: CardBus bridge found at 0000:00:0a.0 [161f:2032] May 30 23:06:39 linux91 kernel: Yenta: Enabling burst memory read
I have 2 amd 64 laptops. Both loaded with Suse 9.1 32 & 64. The first is an Emachines 6807, the 2nd is a Compaq R3140. Problem -- Cards that can be setup and used on the Emachines (generic pcmcia controler) but not on the Compaq. The Compaq has a TI-1620 pcmcia controler that has to be accessed through a pci bridge. I have entered the following into my etc/pcmcia/config.opts --include port 0x3000-0x7fff, memory 0xe8100000-0xe97fffff This allows me to access the controler. Now a modem or aircard 555 are seen, but there is not connection to /dev/ttyS0. transactions May 30 23:06:39 linux91 kernel: Yenta: Using CSCINT to route CSC interrupts to PCI May 30 23:06:39 linux91 kernel: Yenta: Routing CardBus interrupts to PCI May 30 23:06:39 linux91 kernel: Yenta: ISA IRQ mask 0x0000, PCI irq 11 May 30 23:06:39 linux91 kernel: Socket status: 30000010 May 30 23:06:39 linux91 kernel: cs: IO port probe 0x0c00-0x0cff: clean. May 30 23:06:39 linux91 kernel: cs: IO port probe 0x0820-0x08ff: clean. May 30 23:06:39 linux91 kernel: cs: IO port probe 0x0800-0x080f: clean. May 30 23:06:39 linux91 kernel: cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7 May 30 23:06:39 linux91 kernel: cs: IO port probe 0x0100-0x03af: clean. May 30 23:06:39 linux91 kernel: cs: IO port probe 0x0a00-0x0aff: clean. May 30 23:06:39 linux91 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. May 30 23:06:39 linux91 kernel: spurious 8259A interrupt: IRQ7. May 30 23:06:39 linux91 kernel: ttyS0 at I/O 0x3f8 (irq = 11) is a 16550A May 30 23:06:39 linux91 kernel: NET: Registered protocol family 17
From the Compaq -- Jun 1 17:36:15 s91 kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff Jun 1 17:36:15 s91 kernel: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff Jun 1 17:36:15 s91 kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff Jun 1 17:36:15 s91 kernel: cs: memory probe 0xe8100000-0xe97fffff: excluding 0xe8100000-0xe826ffff 0xe83e0000-0xe86bffff 0xe8b10000-0xe8c7ffff 0xe8f60000-0xe90cffff 0xe93b0000-0xe951ffff Jun 1 17:36:15 s91 cardmgr[1841]: socket 0: Serial or Modem
and the var/lib/pcmcia/stab Socket 0: Serial or Modem 0 serial serial_cs 0 ttyS0 4 64 Socket 1: empty serial_cs is loaded and shown in lsmod. pci=noacpi pci=usepirqmask used on both machines. Any suggestions or help. Clark