Hi, Even after having put the isl3890 firmware in the right place, it looks like I'm unable to connect to my wireless router linksys WAP54G with a netgear WG511 card. On the WAP54 WEP is disabled and all connection allowed. Yast seems to detect properly the card, I've set operating mode to Managed, ESSID to "linksys" (same SSID as on the WAP54G), NWID is empty (?), no encryption key and nick name set to "nick" (?)/ In expert settings Channel and bit rate are on auto. Channel is set to "1" on the WAP54G I don't what log could be interesting, here is /var/log/messages. Thank you in advance for any help, Laurent May 17 20:13:39 acer kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002) May 17 20:13:39 acer kernel: eth1: prism54 driver detected card model: Netgear WG511 May 17 20:13:39 acer kernel: eth1: islpci_open() May 17 20:13:39 acer kernel: eth1: resetting device... May 17 20:13:39 acer kernel: eth1: uploading firmware... May 17 20:13:39 acer kernel: eth1: firmware uploaded done, now triggering reset... May 17 20:13:39 acer kernel: eth1: mgt_commit has failed. Restart the device May 17 20:13:39 acer kernel: eth1: islpci_close () May 17 20:13:39 acer kernel: eth1: islpci_open() May 17 20:13:39 acer kernel: eth1: resetting device... May 17 20:13:39 acer kernel: eth1: uploading firmware... May 17 20:13:39 acer kernel: eth1: firmware uploaded done, now triggering reset... May 17 20:13:40 acer kernel: eth1: errant PIMFOR application frame May 17 20:13:40 acer kernel: eth1: timeout waiting for mgmt response 1000, trigging device May 17 20:13:41 acer kernel: eth1: timeout waiting for mgmt response May 17 20:13:41 acer kernel: eth1: mgt_commit has failed. Restart the device May 17 20:13:51 acer kernel: eth1: no IPv6 routers present Sometimes I get: May 17 20:29:02 acer kernel: eth1: errant PIMFOR application frame May 17 20:29:03 acer kernel: eth1: timeout waiting for mgmt response 1000, trigging device May 17 20:29:04 acer kernel: eth1: timeout waiting for mgmt response May 17 20:29:04 acer kernel: eth1: Out of memory, cannot handle oid 0x2160f97c (What is PIMFOR?)