Mailinglist Archive: opensuse (4417 mails)

["Carlos E. R." <robin1.listas@xxxxxxxxxx>]

The Wednesday 2003-11-26 at 21:49 -0500, Tom Maszerowski wrote:

> # modprobe imm
> /lib/modules/2.4.18-4GB/kernel/drivers/scsi/imm.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
> /lib/modules/2.4.18-4GB/kernel/drivers/scsi/imm.o: insmod /lib/modules/2.4.18-4GB/kernel/drivers/scsi/imm.o failed
> /lib/modules/2.4.18-4GB/kernel/drivers/scsi/imm.o: insmod imm failed

You will get that exact message if the drive is not properly connected: I
have just tried (SuSE 8.2) and got that message with the unit
disconnected.

>
> How do I update imm.o?

You should make sure the hardware is really working, maybe trying another
OS.

It should have been updated with the kernel. I can only suggest going in to
the kernel config and check and recompile. Otherwise, report to SuSE
feedback (web page) - but only after making sure there is no hardware
problem.


I have a SuSE 7.3 nearby, but I don't know if the kernel was updated or
not. I might try my ZIP there, but I can't assure you when I will try.

-- 
Cheers,
       Carlos Robinson