On Thursday 04 September 2003 12:42 pm, Tom Nielsen wrote:
I've just installed a 3ware raid card, copied, via dd, an old IDE drive to a new drive attached to the raid card and now need to know how to change grub to point to the new drive. Here's what my current grub.conf says on the new drive:
root (hd0,1) install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) /boot/grub/stage2 0x8000 (hd0,1)/boot/grub/menu.lst quit
I believe I should change the hd0 to sd0....correct? Once I do that, do I need to do something else to get it to setup properly? I changed my fstab already on the new drive.
B--zzzz-T wrong. Grub doesn't care whether a drive is scsi or IDE and it calls them both: hdx So you may not need to change anything... assuming your partitions look the same (are in the same numbering position) as they were. You didn't say enough about your config to comment.
Thanks, Tom
-- +----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 09/04/03 12:56 + +----------------------------------------------------------------------------+ "A diplomat is someone who can tell you to go to hell and make you feel you feel happy to be on your way."