On Fri, 2003-08-29 at 08:33, Andreas Winkelmann wrote:
Tom Nielsen wrote:
here ya go.
Aug 28 22:15:17 mailserver postfix/smtpd[13754]: connect from localhost[127.0.0.1] Aug 28 22:15:17 mailserver postfix/smtpd[13754]: D5B1EBC84: client=localhost[127.0.0.1] Aug 28 22:15:17 mailserver postfix/cleanup[13746]: D5B1EBC84: message-id=<1062134068.9953.10.camel@linux.local> Aug 28 22:15:17 mailserver postfix/qmgr[13722]: D5B1EBC84: from=
, size=1630, nrcpt=1 (queue active) Aug 28 22:15:18 mailserver postfix/smtpd[13754]: disconnect from localhost[127.0.0.1] Aug 28 22:15:18 mailserver postfix/pipe[13748]: C8C86BC57: to= , relay=vscan, delay=2, status=sent (mailserver.neuro-logic.com) Aug 28 22:15:23 mailserver postfix/smtp[13755]: D5B1EBC84: to= , relay=linuxmail-org.mr.outblaze.com[205.158.89.58], delay=6, status=sent (250 Ok: queued as 2B2CC1D7159) My log is huge (meaning my /mail log...not my other log) so I just clipped the part that pertains to me sending an email from home. Everything works fine here at the office, on my machine and everyone else's. I did take out my IP address from mynetworks. I couldn't send at first, but found that I forgot to include a line in main.cf. I'm wondering if it's because I logged in once, then from there on I'm always accepted.
Hmm, i'm missing sasl-messages in your log. Maybe it is disabled? Or switch verbose logging on. Go to /etc/postfix/master.cf and add a "-v" behind the smtpd. Then look at the log, there is after connecting the AUTH... handshake, where a authentication succesfull or something similar should be appearing.
I don't have an smtpd line. Here's what I have; smtp inet n - n - - smtpd #smtps inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes #submission inet n - n - - smtpd # -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes #628 inet n - n - - qmqpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 nqmgr #tlsmgr fifo - - n 300 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp relay unix - - n - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp localhost:10025 inet n - n - - smtpd -o content_filter= maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} cyrus unix - n n - - pipe user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient vscan unix - n n - 10 pipe user=vscan argv=/usr/sbin/amavis ${sender} ${recipient} procmail unix - n n - - pipe flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
And of course, there are testsites in the internet for testing your configuration on open-relays (For example http://www.abuse.net/relay.html).
Thanks for the tip Tom