Hi, I have a small network setup but can't seem to get the routing right. I have tried reading the documentation, but its still not right. So I was wondering if anyone can provide some help. The server has 2 ethernet cards setup: eth0 (192.168.1.53) points to an adsl router 192.168.1.2, which in turn points to the outside world. eth1 (192.168.2.1) points to the internal network. I would like to have the internal network on eth1 route through eth0 to the outside world. Currently the routing table is configured as: 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.2 0.0.0.0 UG 0 0 0 eth0 I know this is not right, as the 192.168.2.0 network can't see the 192.168.1.0 network. I thought that by virtue of the fact both cards were on the same machine it would be able to route packets between them, but i guess not. If anyone can point out what I have to do to achieve this I'd be grateful regards Jeff