Hi, all, Have a vexing problem with this card and Suse 8.0. I downloaded the updated Pcmcia rpms here: http://www.suse.com/us/support/download/updates/80_i386.html . And I was able to get the information about the card, set it uyp as a network device in Yast2 and now ifconfig -a lists eth1 Link encap:Ethernet HWaddr 00:06:25:2A:DE:5F\ BROADCAST MULTICSAT MTU:1500 Metric:1 RX packets:0 errors:0 Dropped:0 overruns:0 frame:0 TX packets:0 errors:7 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0b) TX bytes:1548 (1.5kb) Interrupt:9 Base address:0x100 I went into /etc/pcmcia/wlan-ng.opts and made sure that the card was enabledstation mode was on INfrastructure, infrusture was set with the right SSID. I went to a hot spot. my card blinks and I check /var/log/messages and see that it's not getting an IP from DHCP. Looks like an Intersil firmware version 1.04 Ad-hos demo mode supported IEEE Standard IBSS ad-hoc mode supported WEP supported 104 bit key MAC Address Station name Prism I ready index 0x01: Vcc 5.0 irq 9 io 0x100-0x013f executing: './etwork start eth1' Tx error, status 4 (FID=0127)_ Tx error, status 4 (FID=014E)_ /etc/hotplug/net.agent[2437]: INterface eth1 is handled by service PCMCIA ... exiting eth1: error -110 writing packet header to BAP Tx error, status 4 (FID=0160) Tx error, status 4 (FID=0186) timed out waiting for valid DHCP server response + STarting DHCP client daemon on eth1 . . . . . .No IP address yet. Backgrounding I call t-mobile, and their network guy sas he SEES me trying to get in, and that HE can't get through to me. I check the firewall and it says it's off. Can anyone give me some ideas about what to change to get this working? It's SSOOOOO close I can taste it! Thanks in advance, Nick