OK fax gurus, this mail's for you! I have gotten hylafax installed, ran faxsetup and actually sent faxes from both SuSEfax and printed to fax from kmail which also brings up the fax sending software. Faxes went out, receiver got them, fairly corrupt, but did get them! It seems the faxes received were chopped up. What I mean was, they printed some, missed some, printed some, missed some, etc., you get the picture. It was as if their machine was being fed the information too fast. I checked with the receiver to be sure their fax machine was working ok. It was as they had received several other faxes that same day. Now, I am not sure what is causing this problem, but I am pretty sure it's originating from my machine. Not sure if something misconfigured during the "faxsetup" program or I am missing something in using the fax frontends for hylafax. Thoughts, questions, suggestions? Patrick-- ========================= Ok, fax gurus, I seemed to have solved my hylafax problems quite nicely. For all those that put a thought into what might be causing the problem, thanks! :o) For those that didn't give it a second thought! :-P For any that might want to know how I got it fixed and Hylafax sending out nice faxes with SuSEfax program and even printing to fax, how neat that is! It seems that hylafax does not like Class 1 type modems or setups very much. It works, but only as I described above. After eliminating the settings files and running faxsetup again, noting that I had a Class 2 modem instead, did it work as expected. My modem supported both as most newer modems do now, so when answering those questions about what to use, answer Class 2 and you should have a well behaved fax setup with Hylafax! Patrick