-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tuesday 31 December 2002 02:46, Ralph De Witt wrote:
Hi:
I have done a fresh install of SuSE 8.1 on a MSI KT3 ULTRA2 MOBO with a
ATHALON 2200XP cpu. out errors. I have noticed some errors in the CD R/W
and scsi emulation part of the system. For some reason I see the DVD and CD
R/W listed about 6 times during start up. And for some reason scsi
emulation seems to not start and seems to error on bad commands around line
70 etc. I have been unable to correct these problems. Fstab, and Mtab seem
to be correct. I have attached the startup log and the system log in the
hope that some one could help me correct these problems. The system has
been stable with the exception of these two problems. Thanks for your help.
oops will attach the relevant sections of the startup file:
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda1 hdd=ide-scsi vga=791
<4>ide_setup: hdd=ide-scsi
<6>Initializing CPU#0
<4>Detected 1800.129 MHz processor.
6>Real Time Clock Driver v1.10e
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 89
<6>PCI: Hardcoded IRQ 14 for device 00:11.1
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik
<4>hda: MAXTOR 4K080H4, ATA DISK drive
<4>hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
<4>hdd: LITE-ON LTR-16101B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide0: probed IRQ 14 failed, using default.
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide1: probed IRQ 15 failed, using default.
<4>hda: safely enabled flush
<6>hda: 156301487 sectors (80026 MB) w/2000KiB Cache, CHS=9729/255/63
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4 < hda5 >
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<4>VFS: Mounted root (ext2 filesystem).
<4>hdc: no flushcache support
<4>hdd: no flushcache support
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: LITE-ON Model: LTR-16101B Rev: TS0N
<4> Type: CD-ROM ANSI SCSI revision: 02
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<7>sd_attach()
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: checking transaction log (ide0(3,1)) for (ide0(3,1))
<4>reiserfs: using ordered data mode
Hope this helps and thanks for your help..
- --
Yours,
Ralph.
It said Use Windows XP or better, so I installed SuSE-Linux 8.1
Register Linux User 168814 ICQ #49993234 AIM ralphdewitt jabber.org
ralphdewitt
GPG Public Key available at http://www.keyserver.net
Key id = 3097 3BC4
Kernel version 2.4.19-4GB
Current Linux uptime: 8:17, days users hours minutes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQE+EX3Fmmsm1DCXO8QRAnUmAJ4wfyc5f0Gw1cIiQ17vr+939F9T8ACfeC38
+37fV4SA/Gbt3J8m7UcG7X4=
=njOO
-----END PGP SIGNATURE-----