oeren@ykb.com wrote:
Well, now i did also, but still no result :
KOnCd still crashes.. it says "insmod ... -major-97 failed" KreateCd now sees dvd, and i set it, and try to burn a cd; All goes fine when ripping cd-rom, but it can't begin the writing phase; due to an unrecoverable error..
Any help?
Praise
13.12.2002 11:25
To: suse-linux-e@suse.com cc: Subject: Re: [SLE] can't burn cd's
Does my both drives have to be emulated? Or what else may be the
problem?
That's how I solved the problem:-)
Praise
I've taken to using 'readcd' and 'cdrecord' directly from the command line -- far less trouble than getting the likes of Xcdroast to work. Info on 'readcd' and 'cdrecord' is on the 'man' pages. For data Cds, I use the commands: readcd dev="1,0,0" f=<image file name> cdrecord -v speed=2 dev=1,1,0 -data <image file name> Notes: I have a SCSI card so ide-scsi comes up as dev 1 rather than dev 0 ie CD reader is dev 1,0,0 CD writer is dev 1,1,0 (if you are using same drive for reading and writing then both will use same dev) and yes! I have an old 2X speed Hewlett Packard writer, but it's so reliable that I can't justify dumping it. Suggest that you look at the CD-Writing HOWTO document for a lot of helpfull info. This one is very good. To set up both CD drives for ide-scsi, modify the append line in '/etc/lilo.conf' to include 'hdc=ide-scsi hdd=ide-scsi', then remember to run 'lilo'. Both drives should then be recognised as SCSI. Remember also to change the soft links in /dev to point to the appropriate devices. In my case the links are: /dev/cdrom -> /dev/sr0 /dev/cdrecorder -> /dev/sr1 Good luck Ken Hough