I have a netgear ps101 print server on a network of 3 computers using NFS and TCP/IP. In Suse 8.0, it works fine, but in SuSE 8.1, connection tests OK, but no test page is printed and I cannot print to it. One difference I did notice, in SuSE 8.0, It is configured as Forwarding queue to lp on LPD server 192.168.1.31. On SuSE 8.1, that selection is not available or rather greyed out in the Advanced setup. Tried LPD Filtering and forwarding queue and Direct TCP, but these do not work. How would I get the LPD forwarding Queue so I can select it. CUPS is installed the same on both machines and lprng is not installed on either and both machines are using the same laserjet3 driver. I found the following in the cups_error log. I [03/Nov/2002:20:50:26 -0800] Job 3 queued on 'lp' by 'afore'. I [03/Nov/2002:20:50:26 -0800] Started filter /usr/lib/cups/filter/pstops (PID 26879) for job 3. I [03/Nov/2002:20:50:26 -0800] Started filter /usr/lib/cups/filter/cupsomatic (PID 26880) for job 3. I [03/Nov/2002:20:50:26 -0800] Started backend /usr/lib/cups/backend/lpd (PID 26881) for job 3. E [03/Nov/2002:20:50:26 -0800] PID 26880 stopped with status 2! I [03/Nov/2002:20:50:26 -0800] Hint: Try setting the LogLevel to "debug" Finally found out how to set the debug level for cupsd. Below is what appears to be relavent. Can anyone tell me what "D [04/Nov/2002:08:49:32 -0800] Insecure dependency in eval while running setuid at /usr/lib/cups/filter/cupsomatic line 133." means and how I would correct it? 0800] Cupsomatic backend version $Revision: 1.2 $ running... D [04/Nov/2002:08:49:32 -0800] called with arguments: '7','afore','(stdin)','1','media=Letter,Normal,Upper sides=one-sided' D [04/Nov/2002:08:49:32 -0800] ppd=/etc/cups/ppd/lp.ppd D [04/Nov/2002:08:49:32 -0800] Insecure dependency in eval while running setuid at /usr/lib/cups/filter/cupsomatic line 133. E [04/Nov/2002:08:49:32 -0800] PID 3273 stopped with status 2! D [04/Nov/2002:08:49:32 -0800] Saw EOF! Art