I have a dual boot (Win 2k and SuSE 7.3 Pro) box, that has two Ethernet cards installed. On the Lin side, I have eth0 setup to connect via DHCP to a LinkSys router and cable modem to access the Internet. eth1 is an Asante 10/100 FriendlyNet card and it is to this card that I have directed netatalk to use by ediing the /etc/atalk/atalkd.conf file. I have set my PB 1400 to use ATalk over ethernet, netalk is set to start when SuSE 7.3 starts (rc.config) and I have confirmed it is running. The hub I am using for this hook seems to confirm that the driver is function and that there is a connection. YAST 2 says my eth1 is active, checked cables, etc. but nothing seems to be happening. BTW, eth1 is assigned a static IP 192.168.1.1 Cheers, Brian