Mailinglist Archive: opensuse (4288 mails)
| < Previous | Next > |
Network won't start after reboot on SuSE8.0
- From: Alex Daniloff <alex@xxxxxxxxxxxx>
- Date: Tue, 07 May 2002 11:37:06 -0700
- Message-id: <200205071837.g47Ib6d03851@xxxxxxxxxxxxxxxxx>
Hello SuSE folkz,
We're experiencing severe network problem with SuSE8.0 on five
different systems.
All these boxes were installed with default SuSE8.0 configurations.
Suddenly for no apparent reason, after SuSE8.0 reboot, the network
stopped working on all of them.
I've sent all the information to SuSE support team but so far I didn't
get any reply from them.
Here are related messages from /var/log/boot.msg.
---snip
Setting up loopback interfaceStarting SuSEconfig, the SuSE
Configuration
Tool...
Unknown parameter lo.
Usage: SuSEconfig [--quick|--nonewpackage|--force|--verbose]
[--module name]
failed
---snip
and
---snip
Initializing random number generator
done
Starting SuSEconfig, the SuSE Configuration Tool...
Unknown parameter start.
Usage: SuSEconfig [--quick|--nonewpackage|--force|--verbose] [--module
name]
Starting syslog servicesRunning /etc/init.d/boot.local
---snip
Here are related messages from siga.
---snip
1.6 hwinfo-net
17: PCI 0a.0: 0200 Ethernet controller
[Created at pci.65]
Unique ID: bSAa.pDIXJ11NTU1
Hardware Class: network
Model: "Netgear FA310TX"
Vendor: 11ad "Lite-On Communications Inc"
Device: 0002 "LNE100TX"
SubVendor: 1385 "Netgear"
SubDevice: f004 "FA310TX"
Revision: 0x21
I/O Ports: 0xd000-??? (rw)
Memory Range: 0xcd000000-??? (rw,non-prefetchable)
IRQ: 10 (no events)
Driver Info #0:
Driver Status: tulip is not active
Driver Activation Cmd: "insmod tulip"
---snip
---snip
4.2 ifcfg
/etc/sysconfig/network/ifcfg-eth0
BOOTPROTO="static"
BROADCAST="192.168.1.255"
IPADDR="192.168.1.10"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
STARTMODE="onboot"
UNIQUE="bSAa.pDIXJ11NTU1"
----------------------------------------------------------------------
---------
/etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
----------------------------------------------------------------------
---------
4.3 network/routes
default 192.168.1.100 - -
----------------------------------------------------------------------
---------
4.4 route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
----------------------------------------------------------------------
---------
---snip
Please help us to resolve this issue ASAP, otherwise we'll have to
switch on Red Hat or another less troublesome distro.
All our work stumbled because of this issue.
Our research and development can't be done without networking.
I've attached other files with system related information for your
reference.
Please contact me if any additional information is needed.
Thank you in advance.
Alex Daniloff
R&D Engineer
We're experiencing severe network problem with SuSE8.0 on five
different systems.
All these boxes were installed with default SuSE8.0 configurations.
Suddenly for no apparent reason, after SuSE8.0 reboot, the network
stopped working on all of them.
I've sent all the information to SuSE support team but so far I didn't
get any reply from them.
Here are related messages from /var/log/boot.msg.
---snip
Setting up loopback interfaceStarting SuSEconfig, the SuSE
Configuration
Tool...
Unknown parameter lo.
Usage: SuSEconfig [--quick|--nonewpackage|--force|--verbose]
[--module name]
failed
---snip
and
---snip
Initializing random number generator
done
Starting SuSEconfig, the SuSE Configuration Tool...
Unknown parameter start.
Usage: SuSEconfig [--quick|--nonewpackage|--force|--verbose] [--module
name]
Starting syslog servicesRunning /etc/init.d/boot.local
---snip
Here are related messages from siga.
---snip
1.6 hwinfo-net
17: PCI 0a.0: 0200 Ethernet controller
[Created at pci.65]
Unique ID: bSAa.pDIXJ11NTU1
Hardware Class: network
Model: "Netgear FA310TX"
Vendor: 11ad "Lite-On Communications Inc"
Device: 0002 "LNE100TX"
SubVendor: 1385 "Netgear"
SubDevice: f004 "FA310TX"
Revision: 0x21
I/O Ports: 0xd000-??? (rw)
Memory Range: 0xcd000000-??? (rw,non-prefetchable)
IRQ: 10 (no events)
Driver Info #0:
Driver Status: tulip is not active
Driver Activation Cmd: "insmod tulip"
---snip
---snip
4.2 ifcfg
/etc/sysconfig/network/ifcfg-eth0
BOOTPROTO="static"
BROADCAST="192.168.1.255"
IPADDR="192.168.1.10"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
STARTMODE="onboot"
UNIQUE="bSAa.pDIXJ11NTU1"
----------------------------------------------------------------------
---------
/etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
----------------------------------------------------------------------
---------
4.3 network/routes
default 192.168.1.100 - -
----------------------------------------------------------------------
---------
4.4 route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
----------------------------------------------------------------------
---------
---snip
Please help us to resolve this issue ASAP, otherwise we'll have to
switch on Red Hat or another less troublesome distro.
All our work stumbled because of this issue.
Our research and development can't be done without networking.
I've attached other files with system related information for your
reference.
Please contact me if any additional information is needed.
Thank you in advance.
Alex Daniloff
R&D Engineer
| < Previous | Next > |