cd /etc/X11 pico XF86Config Match this to your needs. Section "Module" Load "type1" Load "speedo" Load "extmod" Load "freetype" Load "record" Load "dbe" Load "glx" EndSection Section "Device" BoardName "GeForce3 Ti 200" Driver "nvidia" Identifier "Device[0]" Option "NoLogo" Option "UseEdidFreqs" Option "PageFlip" #Option "NvAGP" "2" Option "NvAGP" "1" Screen 0 VendorName "NVidia" EndSection On Saturday 04 May 2002 06:20, Thom Nuzum wrote:
can't find the file to edit. I have looked in my etc/X11/XF86Config here it is below: Has my NVIDIA driver put a configuration file somewhere.I don't know about? Thanks anyway.
# /.../ # SaX generated XFree86 config file # Created on: 2002-05-02. # # Version: 4.3 # Contact: Marcus Schaefer
, 2001 # # Automatically generated by [ISaX] (4.3) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" ModulePath "/usr/X11R6/lib/modules" RgbPath "/usr/X11R6/lib/X11/rgb" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection
Section "Module" Load "dbe" Load "type1" Load "speedo" Load "extmod" Load "freetype" Load "glx" EndSection
Section "InputDevice" Driver "keyboard" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbKeyCodes" "xfree86" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection
Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "ButtonNumber" "5" Option "Device" "/dev/mouse" Option "Name" "AutoDetected" Option "Protocol" "imps/2" Option "Vendor" "AutoDetected" Option "ZAxisMapping" "4 5" EndSection
Section "Monitor" Option "CalcAlgorithm" "IteratePrecisely" HorizSync 32-57 Identifier "Monitor[0]" ModelName "AutoDetected" Option "DPMS" VendorName "AutoDetected" VertRefresh 50-75 UseModes "Modes[0]" EndSection
Section "Modes" Identifier "Modes[0]" Modeline "1024x768" 66.29 1024 1040 1216 1328 768 768 775 802 EndSection
Section "Screen" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1024x768" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection
Section "Device" Driver "nvidia" Identifier "Device[0]" Option "dpms" Screen 0 EndSection
Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection
Section "DRI" Group "video" Mode 0660 EndSection
On Fri, 2002-05-03 at 15:36, Curtis Rey wrote:
Well, I didn't and it works fine! Go figure (shrugs shoulders).
Curtis
On Friday 03 May 2002 01:10 pm, Marcel Broekman wrote:
Indeed, this is the setting you need, but you have to give it a value: Option "NoLogo" "on"
Op vrijdag 3 mei 2002 19:48, schreef Curtis Rey:
Section "Device" BoardName "GeForce3 Ti 200" Driver "nvidia" Identifier "Device[0]" Option "NoLogo" *** I believe this is what your after*** Option "UseEdidFreqs" Option "PageFlip" #Option "NvAGP" "2" Option "NvAGP" "1" Screen 0 VendorName "NVidia" EndSection
A quick manual edit will get you what you want. It is an "Option" command in the X config file. As noted its is:
Option "NoLogo"
You can find many of the options and configurations variables at
http://download.nvidia.com/XFree86_40/1.0-2880/README.txt
This will help you fine tune you nvidia cards' performance. Note that if something fails you can check the Xsession error file. If indeed you are trying some of the options/variables and the X server fails, just pico (or Vi, etc...) into the /etc/X11/XF86Config file and comment out the line that gives the error/failure.
HTH, Curtis
On Friday 03 May 2002 11:25 am, Tom Nuzum wrote:
8.0 is nice and haven't registered for support yet, so I have a questions for anyone who can point me in the right direction.
1. How do I remove the NVidia startup screen that came with the NVidia drivers. I cant seem to find it through X86 or Yast2 and am sick of seeing it. Does anyone know what and where the file is to configure Boot startup screen or something to "none".
Thanks
Tom Nuzum NVAR Computer Technology Coordinator 703.207.3228
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com