you may have to change # # Number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards # NETCONFIG="_0" to NETCONFIG="_0_1" in /etc/rc.config before doing that, do an ifconfig and see if eth0:0 is actually up. On Monday 22 April 2002 10:25 am, David List wrote:
On Monday 22 April 2002 15:36, Anders Johansson wrote:
That's one way to do it. Marginally simpler would be to edit /etc/rc.config and change NETDEV_1 to eth0:0 and IFCONFIG_1 to the proper parameters.
I tried editing /etc/rc.config to this:
IPADDR_0="192.168.1.3" IPADDR_1="192.168.1.4" IPADDR_2="" IPADDR_3="" NETDEV_0="eth0" NETDEV_1="eth0:0" NETDEV_2="" NETDEV_3="" IFCONFIG_0="192.168.1.3 broadcast 192.168.1.255 netmask 255.255.255.0 up" IFCONFIG_1="192.168.1.4 broadcast 192.168.1.255 netmask 255.255.255.0 up" IFCONFIG_2="" IFCONFIG_3=""
and run SuSEconfig and reboot. I cannot ping 192.168.1.4 from other LAN hosts. What is wrong?
Thank you for your answer.
Best regards, David List
-- Chad Whitten Network/Systems Administrator neXband Communications cwhitten@nexband.com