Hi, I have SuSE 7.3 on Athlon XP system with VIA KT266A chipset and 512 MB of RAM. Everything is almost fine except two problems: 1) Time to time KDE 2.2.1 from SuSE CDs goes hell slow. Opening folder in Konqueror with only 2 - 3 items takes 1 - 2 sec. Konqueror do not responding at all this time. Restarting X helps, but it is kinda awkward. Installing KDE 2.2.2 update do not help, even worse, this glitch is being there all the time, making KDE 2.2.2 unusable. Complete remove (including setting files) and re-installation of KDE do not helps. I have checked CPU and memory usage by running processes - it was very very low. 2) I could not get UDMA working with neither 2.4.10 neither 2.4.16 SuSE kernels. Below is startup log. I have Maxtor 40 GB 7200 rpm/UDMA133 HD + NEC DVD and Chaintech m/b with VIA KT266A chipset (BIOS setup, cables are OK). Anyone knows how to make them work together in UDMA 100 mode? hdparm reports that UDMA is running for hda (but not DVD), but I am not sure, because hdparm seem to check its settings rather real hardware state. Also, how to tell hdparm to run in UDMA100, not UDMA33 mode? Thanks in advance for any help. Andrei
<4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>blk: queue c02f4900, I/O limit 4095Mb (mask 0xffffffff) <4>hdb: DMA disabled <4>ide0: reset: success <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x53 { DriveReady SeekComplete Index Error } <4>hda: dma_intr: error=0x84 { DriveStatusError BadCRC } <4>ide0: reset: success