Hi Richard,
Thanks for the tip. In fact, I am waiting for 7.3 to
be released to try it out. Do you remember what kind
of problems you were having with 7.1 and 7.2 ?
Thanks,
Babu
--- "Parvass, Richard"
Hi there
Don't know if this is of use, but I had trouble with Megaraid and 7.1 and 7.2. Upgrading to 7.3 did the trick for me though - perhaps you will consider it?
Richard
-----Original Message----- From: babu walad [mailto:vyav@yahoo.com] Sent: 21 October 2001 23:36 To: Dragos Cc: suse-linux-e@suse.com Subject: Re: [SLE] recognizing megaraid under Suse 7.1
Hi Dragos,
I have the AMI (now LSI) MegaRAID PCI controller (actually on motherboard) using the (CMD649) chipset. Here is information:
lspci -vv produces (for the RAID portion only):
00:10.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02) Subsystem: American Megatrends Inc.: Unknown device 0649 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
I have tried installing the Suse 7.1 issued megaraid.o driver, and another I got off the AMI/LSI people.
insmod megaraid produces:
/tmpdir/megaraid.o: init_module: Cannot allocate memory Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
Any clues? Help!
Babu
--- Dragos
wrote: what megaraid card do you have? I have a 2.2 box who can boot it like a charm (the driver is compiled in kernel, not as a module) it's a HP server, so the adapter is called netraid, but it is a truly megaraid card...
dragos
babu walad wrote:
Folks,
I managed to track down a MegaRAID driver (object file) and I also found one as part of the standard 7.1 Suse release.
What I haven't quite figured out is how to tell the kernel about it. It does not seem to detect the megaraid card and load the drivers automatically.
I tried getting it to load with insmod and modprobe but I got errors indicating maybe I need to specify additional parameters. I have no idea what to give for addresses and such.
I tried modifying the modules.conf file and enable scsi-adaptor, since the megaraid appears as scsi, but that didn't work. I also tried to enable ide-scsi and still no success.
Any idea how to approach this?
Thanks!!
Babu
Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com
__________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
__________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com