Hello Keith, Thank you for your reply. Yes, please send me that Promise FastTrack100 driver or better tell where to get it. I'm going to use 2.4.2 kernel with this box. Definitely I need a driver for this darn chipset to be compiled into the kernel. Thank you in advance. Alex On Saturday 14 April 2001 09:18 am, Keith Gibbons wrote:
Alex, have you installed the Promise drivers, they need to be loaded in order to be able to see the extra drives. It is not enough just to configure the Fasttrak BIOS. I have tried unsuccessfully to get this card working with SuSE. Promise have supplied me with a driver for RH 7.0. I think it was compiled with kernel 2.2.16. I can forward it to you if you wish.
Keith Gibbons, Ireland
----- Original Message ----- From: "Alex Daniloff"
To: Cc: Sent: Saturday, April 14, 2001 4:20 AM Subject: [SLE] Linux sees just one drive in a raid array? Hello Linux folkz, I was trying to install SuSE 7.1 distro on ASUS A7V133 MB with Promise PDC20265 FastTrack100 onboard RAID controller. Surprisingly even though I configured raid0 of two WD 20GB HDs through the BIOS the Linux sees just one 10GB HD. Could somebody share his knowledge how to install Linux on HW configured
raid
array0. Thank you in advance. Alex
-- MS Windows users should be covered under the Americans with Disabilities
Act!
--------------> Try Linux and you'll understand why <--------------
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com
-- MS Windows users should be covered under the Americans with Disabilities Act! --------------> Try Linux and you'll understand why <--------------