Hello, I can't get my Linksys combo card to work in our company's network. Here are some settings network device configures as eth0. ifconfig output: inet addr: 192.168.0.200 Bcast:192.168.0.255 Mask 255.255.255.0 route -n Destination Gateway Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 U 0 0 0 lo Why does the below command: route add -host 192.168.0.2 netmask 255.255.255.0 dev eth0 give the error netmask 000000ff doesn't make sense with host route. How can this be solved? And why no host from 192.168.0.0 network is accessible (no ping returns), though route table seems to be set up properly? I have the PCMLM56 Linksys EtherFast 10/100 + 56K Modem PC Card. I have SuSE 6.2 installed on a Winbook XL. I have the card working at home via telephone line. But at work, I can't get the card working on our ISDN lines. Thanks George __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq