I can't seem to get xcdroast to work correctly. The burning always aborts, with an error message (see below). I would appreciate any help. Thanks fx ATIP start of lead out: 336225 (74:45/00) Disk type: Cyanine, AZO or similar Manufacturer: Ritek Co. Blocks total: 336225 Blocks current: 336225 Blocks remaining: 39463 RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 48698 Starting to write CD/DVD at speed 2 in write mode for single session. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 /usr/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. write_g1: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) CDB: 2A 00 00 00 DC C0 00 00 10 00 Sense Bytes: F0 00 03 00 00 00 00 19 00 06 1E 44 02 FF 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0xFF (no seek complete) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.090s timeout 40s write track data: error after 115736576 bytes Sense Bytes: F0 00 00 00 00 00 00 19 00 06 22 FB 00 00 00 00 00 00 Writing time: 386.643s /usr/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. close track/session: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) CDB: 5B 00 02 00 00 00 00 00 00 00 Sense Bytes: F0 00 05 00 00 00 00 19 00 06 22 FC 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.007s timeout 480s /usr/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo had 3660 puts and 3533 gets. /usr/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo was 0 times empty and 1 times full, min fill was 98%. Fixating time: 4.374s -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq