Mailinglist Archive: opensuse (2425 mails)

[simeo@xxxxxxxxxx (Simeó)]

A mié, 14 jun 2000, Mark B Withers va escriure:

Hi Mark, this is my configuration for my two ne nics.

/etc/conf.modules
-------------
alias etho ne
alias etho ne
options ne io=0x300,0x320 irq=5,10

(you should change ne (novell eagle) for 3c509)

Lilo only try to detect one nic card, for this reason, you must put this line
in /etc/lilo.conf:

append= "ether=0,0,eth1"

Hope it helps.
Bye

          ----------------
              Simeó Reig 
           simeo@xxxxxxxxx 
          Barcelona (SPAIN)
          -----------------   

> Hello everybody!
> 
> I'm trying to set-up multiple network cards to work under S.u.S.E.
> 6.1.
> 
> I had to re-compile my kernel in order to use my machine as a
> gateway/firewall and wish to enable bridging between the two nic's.
> They are both 3 Com 509's, but for some reason the kernel will only
> recognise one under the new "experimental (to me)" kernel 2.2.16.
> 
> My original kernel (2.2.5) will recognise both nics and seems to use
> modules for the driver. On the newer kernel I loaded the nic driver as
> a builtin and therefore there is no module.
> 
> Should I recompile the kernel and use modules for the nic cards
> instead?
> 
> Thanks for listening!
> 
> Mark 
> 
> 
> -- 
> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx             
> Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/


-- 
To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx             
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/