----- Original Message -----
From: "Phoenix"
Hello, I just upgraded to SuSE 6.4 (which works great !) and I installed an Acer Aopen FM56-ITU/2 ISA modem ( I was told it worked well with Linux) Linux finds it alright, and it can dial out on it, but it won't connect to my ISP. I tried it with another ISP and it dosen't connect . I tried to get it working with setserial (setserial /dev/ttyS2 uart 16550A port 0x3e8 irq 4 autoconfig skip_test ^fourport )
still nothing. Any ideas ?
I use the same (exact) modem. My jumpers are set to make the modem com 2. Works fine. Configuring the modem to be com 2 made it easier to set it up for the BeOS, so I've never changed it back. So, my modem is recognised on /dev/ttyS2. The only change I make is to insert a "W2" in the dialing string so the log reports connect speed. (ATW2DT). Cannot help you with serial port configuration. I took the easy way out. Good luck Paul -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/