Mailinglist Archive: opensuse (2358 mails)
| < Previous | Next > |
Re: [SLE] Masquerading Causing Hair Loss
- From: mhtexcollins@xxxxxxxx (Michael H. Collins)
- Date: Mon, 18 Oct 1999 07:02:52 -0500
- Message-id: <380B0C6C.A51D00A@xxxxxxxx>
Check out this site for all your problems...
http://jgo.local.net/LinuxGuide/index.html
"Argentium G. Tiger" wrote:
>
> At 10:56 AM 10/17/1999 -0500, you wrote:
> >I'm just about to pull out my hair with Masq. I've upgraded my server to
> >6.2 because I thought it would be easier to configure.
>
> Join the club, I've got very little hair left as well! :-)
>
> I've been fighting with this EXACT problem all day and all of tonight, and
> I think I've more or less solved it with the help of a whole bunch of
> people (Lenz Grimmer & Jon Penington as big contributers to what passes for
> my sanity). :-)
>
> >I can go to my server, wvdial onto the net, surf around, and ping
> >anything.
>
> Ok, so you're probably using ppp0 as your connection device.
>
> >My client IP is 192.168.1.2
> >My server IP is 192.168.1.1
>
> *grin* Very close to what I'm doing... Only difference is my clients are
> 192.168.1.101 to 192.168.1.103 inclusive.
>
> >On my server in the rc.config file I have:
> >IP_FORWARD=yes
>
> Good.
>
> >#
> ># Masquerading settings - See /usr/doc/packages/firewall
> ># for a detailed description
> >#
> >MSQ_START="yes"
> >MSQ_NETWORKS="192.168.0.0/24"
> >MSQ_DEV="eth0"
> >MSQ_MODULES="ip_masq_cuseeme ip_masq_ftp ip_masq_irc ip_masq_quake
> >ip_masq_raudio ip_masq_vdolive"
>
> Take this for what it's worth, but I had to change MSQ_DEV="eth0" to
> MSQ_DEV="ppp0".
>
> >route -n on the client looks like this:
>
> Routes look good. They'll probably look more expansive on your server when
> your wvdial connection is active and up.
>
> >Any ideas on what to check would be appreciated.
>
> Lenz suggested that I install 2 packages:
> "firewall" from the "n" series, and "ipchains" from the "sec" series.
>
> He also gave me the following URL to read:
>
> http://skaro.nightcrawler.com/~bb/FW-HOWTO/FW-Howto.html
>
> I learned about the MSQ_DEV="eth0" to MSQ_DEV="ppp0" change from that URL.
>
> Good luck... I know how frustrating this piece of the networking puzzle
> can be. It should _not_ be this difficult.
>
> --
> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
> Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
--
Michael H. Collins http://www.linuxlink.com
512-656-9508 http://www.xfce.org
*
First, Find out what is in /usr/doc. LinuxFunn!!!!!!!!!
SuSE 6.2...........The Ultimate NT service pack.
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
| < Previous | Next > |