Mailinglist Archive: opensuse (2234 mails)

[Drow@xxxxxxxxxxxx (Aduanne Carter)]

Purple Shirt wrote:
> 
> Hello,

Hi, I used this card at work before...

> Now I implemented with direct kernel inclusion and it works but I got a
> couple errors while booting and I like to know how to fix those.
> 
> I attach the output here....
> 
> boot messages:
> 
> Sound initialization started
> Found OPL3-SAx (YMF719)
> <MS Sound System (CS4231)> at 0x534 irq 9 dma 0,1
> <MPU-401 0.0  Midi interface #1> at 0x330 irq 9 dma 0
> MSS: I/O port conflict                                  <-error
> mpu401: I/O port 330 already in use                     <-error

Two different sound modules trying to use the same resources.....

> 
> <Yamaha OPL3> at 0x388
> Sound initialization complete
> 
> <prompt>cat /dev/sndstat
> OSS/Free:3.8s2++-971130
> Load type: Driver compiled into kernel
> Kernel: Linux shango 2.2.12 #2 SMP Sat Aug 28 07:01:37 EDT 1999 i586
> Config options: 0
> 
> Installed drivers:
> Type 10: MS Sound System
a type of WSS/MSS

> Type 27: Compaq Deskpro XL
a type of WSS/MSS

> Type 42: OPL3SA2
hmmm.... (sbpro maybe?)

> Type 45: OPL3SA2 MSS
a type of WSS/MSS

> Type 43: OPL3SA2 MIDI
Midi support

> Type 88: AD1816
a type of WSS/MSS

> Type 1: OPL-2/OPL-3 FM
Adlib support

> Type 5: Roland MPU-401
MPU401 support

> Type 26: MPU-401 (UART)
MPU401 Support

> Type 37: Loopback MIDI Device
Midi support

> 
> Card config:
> OPL3SA2 at 0x370 irq 9 drq 0,1
> OPL3SA2 MSS at 0x530 irq 9 drq 0,1
> OPL3SA2 MIDI at 0x330 irq 9 drq 0
> (Compaq Deskpro XL at 0x530 irq 11 drq 3)                

OPL3SA2 already has this device so how can another WSS/MSS use this as
well?  You have to choose which one you want to use and disable the
other device/module.  Basically you have too many devices/modules
enabled.  Only include devices/modules not already covered by the
OPL3SA2 device/module.  Or disable the OPL3SA2 module and configure each
component separately, ie: WSS/MSS(only 1), Adlib, MPU401i(only 1),
SB16.  Know what I mean?

<-error?
> (Roland MPU-401 at 0x330 irq 9 drq 0)                    <-error?

Same applies here.....

> OPL-2/OPL-3 FM at 0x388 drq 0
> Loopback MIDI Device drq 0
> 

===================
Aduanne Carter    #
Drow@xxxxxxxxxxxx #
===================

--    
To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx             
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/