Mailinglist Archive: opensuse (2141 mails)

[h.aiman@xxxxxxxxxxxxxx (Aiman Hussin)]

Hai there, it's me again... i got another problem... it's seems that i
can't use my soundcard under linux suse 6.0. I have try to edit
isapnp.conf... but has no luck at all. FYI, I am using ess isa pnp sound
card. I attach my isapnp.conf with this mail hoping that one of u can
figure out what's wrong with it. Thank you....</PRE>
<PRE>
# $Id: pnpdump.c,v 1.17 1998/11/10 22:45:04 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# <A HREF="http://www.roestock.demon.co.uk/isapnptools/";><A HREF="http://www.roestock.demon.co.uk/isapnptools/</A">http://www.roestock.demon.co.uk/isapnptools/</A</A>>
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier be ff ff ff ff 69 18 73 16

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier be ff ff ff ff 69 18 73 16)
# Vendor Id ESS1869, No Serial Number (-1), checksum 0xBE.
# Version 1.0, Vendor version 1.0
# ANSI string -->ESS ES1869 Plug and Play AudioDrive<--
#
# Logical device id ESS0006
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3c
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1869/-1 (LD 0
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0800
#         Maximum IO base address 0x0ff8
#         IO base alignment 8 bytes
#         Number of IO addresses required: 8
 (IO 0 (SIZE 8) (BASE 0x0800))
 (NAME "ESS1869/-1[0]{ESS ES1869 Plug and Play AudioDrive}")
 (ACT Y)
))
#
# Logical device id ESS1869
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1869/-1 (LD 1

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 0 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 0 bytes
#             Number of IO addresses required: 16
 (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 0 bytes
#             Number of IO addresses required: 4
 (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 0 bytes
#             Number of IO addresses required: 2
 (IO 2 (SIZE 2) (BASE 0x0330))

#       Start dependent functions: priority acceptable
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 0 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9 or 10.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 0 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0330
#             IO base alignment 48 bytes
#             Number of IO addresses required: 2
 (IO 2 (SIZE 2) (BASE 0x0300))

#       Start dependent functions: priority acceptable
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
#(IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 0 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0330
#             IO base alignment 48 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0300))

#       Start dependent functions: priority acceptable
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 0 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0800))

#       Start dependent functions: priority functional
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffc
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0800))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0800
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 2 (SIZE 2) (BASE 0x0800))

#     End dependent functions
 (NAME "ESS1869/-1[1]{ESS ES1869 Plug and Play AudioDrive}")
 (ACT Y)
))
#
# Logical device id ESS0001
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3c
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1869/-1 (LD 2

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0201
#             Maximum IO base address 0x0201
#             IO base alignment 0 bytes
#             Number of IO addresses required: 1
 (IO 0 (SIZE 1) (BASE 0x0201))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0200
#             Maximum IO base address 0x020f
#             IO base alignment 1 bytes
#             Number of IO addresses required: 1
 (IO 0 (SIZE 1) (BASE 0x0200))

#     End dependent functions
#     Compatible device id PNPb02f
 (NAME "ESS1869/-1[2]{ESS ES1869 Plug and Play AudioDrive}")
 (ACT Y)
))
#
# Logical device id ESS0002
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3c
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS1869/-1 (LD 3

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       IRQ 9, 10 or 11.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 9 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0168
#             Maximum IO base address 0x0168
#             IO base alignment 0 bytes
#             Number of IO addresses required: 8
 (IO 0 (SIZE 8) (BASE 0x0168))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x036e
#             Maximum IO base address 0x036e
#             IO base alignment 0 bytes
#             Number of IO addresses required: 2
 (IO 1 (SIZE 2) (BASE 0x036e))

#       Start dependent functions: priority acceptable
#       IRQ 9, 10 or 11.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 9 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x01e8
#             Maximum IO base address 0x01e8
#             IO base alignment 0 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x01e8))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03ee
#             Maximum IO base address 0x03ee
#             IO base alignment 0 bytes
#             Number of IO addresses required: 2
#(IO 1 (SIZE 2) (BASE 0x03ee))

#       Start dependent functions: priority acceptable
#       IRQ 12.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 12 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0168
#             Maximum IO base address 0x0168
#             IO base alignment 0 bytes
#             Number of IO addresses required: 8
 (IO 0 (SIZE 8) (BASE 0x0168))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x036e
#             Maximum IO base address 0x036e
#             IO base alignment 0 bytes
#             Number of IO addresses required: 2
 (IO 1 (SIZE 2) (BASE 0x036e))

#       Start dependent functions: priority acceptable
#       IRQ 12.
#             High true, edge sensitive interrupt (by default)
#(INT 0 (IRQ 12 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x01e8
#             Maximum IO base address 0x01e8
#             IO base alignment 0 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x01e8))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03ee
#             Maximum IO base address 0x03ee
#             IO base alignment 0 bytes
#             Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x03ee))

#       Start dependent functions: priority functional
#       IRQ 10, 11 or 12.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 10 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x01f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
 (IO 0 (SIZE 8) (BASE 0x0100))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x03fe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
 (IO 1 (SIZE 2) (BASE 0x0300))

#     End dependent functions
#     Compatible device id PNP0600
 (NAME "ESS1869/-1[3]{ESS ES1869 Plug and Play AudioDrive}")
 (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)