Mailinglist Archive: opensuse (1377 mails)

[mclark@xxxxxxxxxxxxxxxxxx (Michael Clark)]

Herbert Betz wrote:

> > On Fri, 7 Aug 1998, Michael Clark wrote:
> > > Aug  4 22:22:11 INET nmbd[118]: Packet send failed to 192.168.100.255(138)
> > > ERRNO=Network is unreachable
> > > The IP-Address of my computer is set to 192.168.100.10 in /etc/hosts ...
> > >
> > what does your ifconfig say??
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
>           UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
>           RX packets:491 errors:0 dropped:0 overruns:0
>           TX packets:491 errors:0 dropped:0 overruns:0
>
> dummy0    Link encap:10Mbps Ethernet  HWaddr 00:00:00:00:00:00
>           inet addr:192.168.100.10  Bcast:192.168.100.255
> Mask:255.255.255.0
>           UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0
>           TX packets:0 errors:0 dropped:0 overruns:0
> >
> > what does route say??
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> INET.anae.kla.d *               255.255.255.255 UH    0      0        0
> dummy0
> loopback        *               255.0.0.0       U     0      0       13
> lo
> >
> > can you ping other people on your subnet??
> No problem to ping localhost or ppp0 when connected ...
> >
> > is there a firewall running??
> No firewall.
>
> I can even do the following:
>
> # smbclient '\\localhost\ftp'
> Added interface ip=192.168.100.10 bcast=192.168.100.255
> nmask=255.255.255.0
> Server time is Fri Aug  7 16:12:27 1998
> Timezone is UTC+2.0
> Password:
> Domain=[ANAESTHESIE] OS=[Unix] Server=[Samba 1.9.17p2]
> smb: \> ls
>   bin                          D         0  Mon Jun 29 23:26:35 1998
>   dev                          D         0  Mon Jun 29 23:26:35 1998
>   ...
> smb: \>quit
>
> Other suggestions for this cryptic nmdb-errormessage ?
> Packet send failed to 192.168.100.255(138) ERRNO=Network is unreachable
>
> TIA,
> Herbert
> kla@xxxxxxxxxxxxxx
>
> P.S. to Michael Clarke:
>
> Thanks for your hints on my netscape color problem with V7-Mirage card. After looking at the X11-Cards-file, I guess, I haven't installed the right Xserver (S3 instead of VGA/SVGA) for this card ...
>
> -
> To get out of this list, please send email to majordomo@xxxxxxxx with
> this text in its body: unsubscribe suse-linux-e

Are you trying to use samba via ppp??  The dummy0 device is simulated networking on your local box, not involving a NIC.  I have never set up samba via ppp.  If you are trying to reach a machine on
your lan, you will need an eth0 device instead of the dummy0 (or in addition to).

I am not real clear on what you are trying to accomplish here.

mc

-
To get out of this list, please send email to majordomo@xxxxxxxx with
this text in its body: unsubscribe suse-linux-e