On Monday 05 January 2009 14:09:59 PGNet wrote:
Yes it sounds like the driver has not been loaded, what kind of card is this?
It's an "Intel Corporation 82541PI Gigabit Ethernet Controller"
using the e1000 driver,
modinfo e1000 | grep ^version version: 8.0.6-NAPI
lsmod | grep e1000 e1000 191684 0
Try these commands: ip addr dmesg | grep eth
grep eth2 /etc/modprobe.conf.local alias eth2 e1000
This method of device naming has been deprecated for some time. /etc/udev/rules.d/70-persistent-net.rules is the correct file.
So, for ifcfg-brTEST:
IPADDR='10.1.1.1/24' BRIDGE='yes' BRIDGE_PORTS='' BRIDGE_FORWARDDELAY='0' BRIDGE_STP='off' BOOTPROTO='static' STARTMODE='auto'
Iiuc, then, in this config *NO* BRIDGE_PORT assigned? Clearly not to a real ethX interface, but not even a dummy-net intfc required?
The bridge is itself a virtual Ethernet interface. No dummies required. -- James Oakley jfunk@opensuse.org -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-virtual+help@opensuse.org