Author: dmedina
Date: 2016-05-10 18:50:25 +0200 (Tue, 10 May 2016)
New Revision: 95824
Modified:
trunk/yast/ca/po/storage.ca.po
Log:
Modified: trunk/yast/ca/po/storage.ca.po
===================================================================
--- trunk/yast/ca/po/storage.ca.po 2016-05-10 16:45:32 UTC (rev 95823)
+++ trunk/yast/ca/po/storage.ca.po 2016-05-10 16:50:25 UTC (rev 95824)
@@ -8,8 +8,8 @@
msgstr ""
"Project-Id-Version: YaST (@memory@)\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-09-28 18:17+0200\n"
-"PO-Revision-Date: 2015-09-29 18:03+0100\n"
+"POT-Creation-Date: 2016-05-06 16:58+0200\n"
+"PO-Revision-Date: 2016-05-10 18:47+0100\n"
"Last-Translator: David Medina \n"
"Language-Team: Catalan\n"
"Language: ca\n"
@@ -31,10 +31,12 @@
"\n"
"To continue despite this warning, click Yes.\n"
msgstr ""
-"Utilitzeu aquest programa només si esteu familiaritzat amb el mètode de partició de discos durs.\n"
+"Utilitzeu aquest programa només si esteu familiaritzat amb el mètode de "
+"partició de discos durs.\n"
"\n"
"Mai no feu la partició de discos que puguin estar en ús d'alguna manera\n"
-"(muntats, com a intercanvi, etc.), tret que sapigueu exactament el que esteu fent.\n"
+"(muntats, com a intercanvi, etc.), tret que sapigueu exactament el que esteu "
+"fent.\n"
"En cas contrari, la taula de particions no es transmetrà al\n"
"nucli, la qual cosa podria ocasionar la pèrdua de dades.\n"
"\n"
@@ -165,14 +167,20 @@
#. TRANSLATORS: popup error message
#: src/clients/inst_disk_proposal.rb:238
msgid "Not enough space available to propose snapshots for root volume."
-msgstr "No hi ha prou espai disponible per proposar instantànies del volum d'arrel."
+msgstr ""
+"No hi ha prou espai disponible per proposar instantànies del volum d'arrel."
#. TRANSLATORS: popup error message
#: src/clients/inst_disk_proposal.rb:244 src/clients/inst_target_part.rb:449
msgid "Not enough space available to propose separate /home."
msgstr "No hi ha prou espai disponible per proposar una /home separada."
-#: src/clients/inst_disk_proposal.rb:295
+#: src/clients/inst_disk_proposal.rb:283
+#, fuzzy
+msgid "Nothing assigned as root filesystem. Cannot continue."
+msgstr "No hi ha res assignat com a sistema de fitxers arrel!"
+
+#: src/clients/inst_disk_proposal.rb:304
msgid ""
"Computing this proposal will overwrite manual changes \n"
"done so far. Continue with computing proposal?"
@@ -269,7 +277,8 @@
"\n"
"<p>\n"
"El canvi de mida real només es durà a terme un cop s'hagin confirmat totes\n"
-"les seleccions fetes a l'última finestra de la instal·lació. Fins aleshores, la \n"
+"les seleccions fetes a l'última finestra de la instal·lació. Fins aleshores, "
+"la \n"
"partició del Windows no es modificarà.\n"
"</p>\n"
@@ -317,7 +326,8 @@
"\n"
"<p>\n"
"A la barra gràfica superior es mostra la situació actual.\n"
-"A la barra gràfica inferior es mostra la situació després de la instal·lació (un \n"
+"A la barra gràfica inferior es mostra la situació després de la instal·lació "
+"(un \n"
"cop dut a terme el redimensionament).\n"
"</p>\n"
@@ -384,7 +394,8 @@
"</p>\n"
msgstr ""
"\n"
-"<p>Introduïu un valor per a determinar la mida de la instal·lació de <b>Linux</b>.\n"
+"<p>Introduïu un valor per a determinar la mida de la instal·lació de "
+"<b>Linux</b>.\n"
"Les particions del sistema &product; es crearan de forma automàtica\n"
"en funció d'aquest valor.\n"
"</p>\n"
@@ -400,7 +411,8 @@
msgstr ""
"\n"
"<p>\n"
-"<b>Windows usat</b> és la mida de la part emprada en la partició de Windows.\n"
+"<b>Windows usat</b> és la mida de la part emprada en la partició de "
+"Windows.\n"
"</p>\n"
#. help text (non-graphical mode), continued
@@ -443,7 +455,8 @@
"la instal·lació mínima de Linux.\n"
"\n"
"Per instal·lar Linux, primer heu d'arrencar Windows\n"
-"i desinstal·lar algunes aplicacions o suprimir algunes dades per alliberar-ne espai.\n"
+"i desinstal·lar algunes aplicacions o suprimir algunes dades per alliberar-"
+"ne espai.\n"
"\n"
"Necessiteu com a mínim %1 MB d'espai lliure al dispositiu de\n"
"Windows, comptant l'espai ocupat per l'estació de treball Windows i per a \n"
@@ -520,7 +533,9 @@
#. popup text
#: src/clients/inst_target_part.rb:96
msgid "Your system can only be configured with the custom partitioning option."
-msgstr "El vostre sistema només pot configurar-se amb l'opció de partició personalitzada."
+msgstr ""
+"El vostre sistema només pot configurar-se amb l'opció de partició "
+"personalitzada."
#. Win NT / 2000
#. The Windows version is Windows NT or Windows 2000. Tell the user that this is currently
@@ -612,7 +627,8 @@
msgstr ""
"Heu decidit suprimir completament la partició de Windows.\n"
"\n"
-"Totes les dades que es trobin en aquesta partició es perdran durant el procés.\n"
+"Totes les dades que es trobin en aquesta partició es perdran durant el "
+"procés.\n"
"\n"
"Esteu segur que voleu suprimir la partició de Windows?\n"
@@ -657,8 +673,11 @@
#. normally the target is located on hard disks. Here no hard disks
#. can be found. YaST2 cannot install. Update CD might have newer drivers.
#: src/clients/inst_target_selection.rb:172
-msgid "No disks found. Try using the update CD, if available, for installation."
-msgstr "No s'han trobat discos. Proveu d'utilitzar CD d'actualització per a la instal·lació, si està disponible."
+msgid ""
+"No disks found. Try using the update CD, if available, for installation."
+msgstr ""
+"No s'han trobat discos. Proveu d'utilitzar CD d'actualització per a la "
+"instal·lació, si està disponible."
#. There are several hard disks found. Linux is completely installed on
#. one hard disk - this selection is done here
@@ -674,7 +693,8 @@
msgstr ""
"<p>\n"
"Tots els discos durs detectats automàticament al sistema\n"
-"es mostren aquí. Seleccioneu el disc dur al qual voleu instal·lar el &product;.\n"
+"es mostren aquí. Seleccioneu el disc dur al qual voleu instal·lar el "
+"&product;.\n"
"</p>\n"
#. help part 2 of 3
@@ -685,7 +705,8 @@
"</p>\n"
msgstr ""
"<p>\n"
-"Posteriorment podeu seleccionar el lloc del disc dur on s'instal·larà el &product;.\n"
+"Posteriorment podeu seleccionar el lloc del disc dur on s'instal·larà el "
+"&product;.\n"
"</p>\n"
#. help part 3 of 3
@@ -702,7 +723,8 @@
"<p>\n"
"Per als experts existeix l’opció <b>Particionament personalitzat</b>\n"
"que permet tenir un control complet sobre les particions dels discos durs\n"
-"i assignar les particions a punts de muntatge durant la instal·lació de &productes;.\n"
+"i assignar les particions a punts de muntatge durant la instal·lació de "
+"&productes;.\n"
"</p>\n"
#. first step of hd prepare, select a single disk or "expert" partitioning
@@ -785,7 +807,8 @@
"ensure that ownerships of home directories are set properly."
msgstr ""
"La partició /home no es formatarà. Després de la instal·lació,\n"
-"assegureu-vos que els propietaris dels directoris de la carpeta de l'usuari estiguin ben establerts."
+"assegureu-vos que els propietaris dels directoris de la carpeta de l'usuari "
+"estiguin ben establerts."
#. label text
#: src/clients/partitions_proposal.rb:218
@@ -935,8 +958,10 @@
"</p>"
msgstr ""
"<p>\n"
-"És molt probable que el disc dur seleccionat s'utilitzi per al Windows. No hi ha \n"
-"prou espai per a &product;. Es pot <b>suprimir el Windows completament,</b> o bé,\n"
+"És molt probable que el disc dur seleccionat s'utilitzi per al Windows. No "
+"hi ha \n"
+"prou espai per a &product;. Es pot <b>suprimir el Windows completament,</b> "
+"o bé,\n"
"<b>encongir</b> la partició per a obtenir espai lliure.\n"
"</p>"
@@ -951,7 +976,8 @@
"</p>\n"
msgstr ""
"<p>\n"
-"Si suprimiu el Windows, totes les dades que es trobin en aquesta partició es perdran\n"
+"Si suprimiu el Windows, totes les dades que es trobin en aquesta partició es "
+"perdran\n"
"<b>de forma irreversible</b> durant la instal·lació. Si voleu encongir la\n"
"partició del Windows, és <b>molt</b> recomanable fer una\n"
"<b>còpia de seguretat de les dades</b>, ja que es farà una\n"
@@ -962,7 +988,7 @@
#. Label text
#. TRANSLATORS: checkbox text
#: src/include/partitioning/auto_part_ui.rb:341
-#: src/modules/StorageProposal.rb:6245
+#: src/modules/StorageProposal.rb:6250
msgid "Propose Separate &Home Partition"
msgstr "Proposa una partició &Home separada"
@@ -980,7 +1006,7 @@
msgstr "Tipus de proposta"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:251
+#: src/include/partitioning/custom_part_check_generated.rb:244
msgid ""
"You have not assigned a root partition for\n"
"installation. This does not work. Assign the root mount point \"/\" to a\n"
@@ -989,13 +1015,14 @@
"Really use this setup?\n"
msgstr ""
"No heu assignat cap partició d'arrel per a la\n"
-"instal·lació. Això no funciona. Assigneu el punt de muntatge d'arrel \"/\" a una\n"
+"instal·lació. Això no funciona. Assigneu el punt de muntatge d'arrel \"/\" a "
+"una\n"
"partició.\n"
"\n"
"Realment voleu fer servir aquesta configuració?\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:264
+#: src/include/partitioning/custom_part_check_generated.rb:257
msgid ""
"You tried to mount a FAT partition to one of the following mount\n"
"points: /, /usr, /home, /opt or /var. This will very likely cause problems.\n"
@@ -1004,13 +1031,15 @@
"Really use this setup?\n"
msgstr ""
"Heu intentat muntar una partició fat en un\n"
-"dels punts de muntatge següents: /, /usr, /home, /opt o /var. Això probablement comportarà problemes.\n"
-"Utilitzeu un sistema de fitxers de Linux (ext3 o ext4) per a aquests punts de muntatge.\n"
+"dels punts de muntatge següents: /, /usr, /home, /opt o /var. Això "
+"probablement comportarà problemes.\n"
+"Utilitzeu un sistema de fitxers de Linux (ext3 o ext4) per a aquests punts "
+"de muntatge.\n"
"\n"
"Realment voleu utilitzar aquesta configuració?\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:277
+#: src/include/partitioning/custom_part_check_generated.rb:270
msgid ""
"You tried to mount a FAT partition to the\n"
"mount point /boot. This will very likely cause problems. Use a Linux file\n"
@@ -1019,13 +1048,14 @@
"Really use this setup?\n"
msgstr ""
"Heu intentat muntar una partició FAT sobre el punt de muntatge /boot.\n"
-"Això probablement comportarà problemes. Utilitzeu un sistema de fitxers Linux\n"
+"Això probablement comportarà problemes. Utilitzeu un sistema de fitxers "
+"Linux\n"
"com ara ext3 o ext4 per aquest punt de muntatge.\n"
"\n"
"Realment voleu fer servir aquesta configuració?\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:291
+#: src/include/partitioning/custom_part_check_generated.rb:284
msgid ""
"You have mounted a partition with Btrfs to the\n"
"mount point /boot. This will very likely cause problems. Use a Linux file\n"
@@ -1034,14 +1064,15 @@
"Really use this setup?\n"
msgstr ""
"Heu muntat una partició amb Btrfs al punt de\n"
-"muntatge /boot. Això probablement causarà problems. Feu servir un sistema de fitxers Linux \n"
+"muntatge /boot. Això probablement causarà problems. Feu servir un sistema de "
+"fitxers Linux \n"
"com ara ext3 o ext4 per a aquest punt de muntatge.\n"
"\n"
"Realment voleu fer servir aquesta configuració?\n"
#. A PReP/CHRP partition is not supposed to be mounted. So if we find any
#. other /boot partition, we should warn the user.
-#: src/include/partitioning/custom_part_check_generated.rb:305
+#: src/include/partitioning/custom_part_check_generated.rb:298
msgid ""
"Warning:\n"
"Your system needs a boot partition with type 0x41 PReP/CHRP.\n"
@@ -1056,7 +1087,7 @@
"Realment voleu usar aquesta configuració?\n"
#. popup text, %1 is a number
-#: src/include/partitioning/custom_part_check_generated.rb:320
+#: src/include/partitioning/custom_part_check_generated.rb:313
msgid ""
"Warning:\n"
"Your boot partition ends above cylinder %1.\n"
@@ -1077,7 +1108,7 @@
"Realment ho voleu així?\n"
#. popup text, %1 is a size
-#: src/include/partitioning/custom_part_check_generated.rb:340
+#: src/include/partitioning/custom_part_check_generated.rb:333
msgid ""
"Warning:\n"
"Your boot partition is smaller than %1.\n"
@@ -1092,7 +1123,7 @@
"Voleu realment mantenir aquesta mida per a la partició /boot?\n"
#. /////////////////////////// NO BOOT ///////////////////////////
-#: src/include/partitioning/custom_part_check_generated.rb:357
+#: src/include/partitioning/custom_part_check_generated.rb:350
msgid ""
"Warning: There is no partition of type bios_grub present.\n"
"Such a partition is recommended (required with Btrfs) when Grub2 is\n"
@@ -1109,7 +1140,7 @@
#. popup text
#. If the user chooses 'no' here, the system will not be able to
#. boot from the hard drive!
-#: src/include/partitioning/custom_part_check_generated.rb:377
+#: src/include/partitioning/custom_part_check_generated.rb:370
msgid ""
"Warning: There is no partition mounted as /boot.\n"
"To boot from your hard disk, a small /boot partition\n"
@@ -1126,7 +1157,7 @@
"Realment voleu usar la configuració sense la partició /boot?\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:396
+#: src/include/partitioning/custom_part_check_generated.rb:389
msgid ""
"Warning: According to your setup, you intend to\n"
"boot your machine from the root partition (/), which, unfortunately,\n"
@@ -1138,22 +1169,26 @@
"Really use this setup?\n"
msgstr ""
"Atenció: en funció de la configuració, preteneu arrencar\n"
-"la màquina des de la partició arrel (/). Malauradament, aquesta partició acaba\n"
+"la màquina des de la partició arrel (/). Malauradament, aquesta partició "
+"acaba\n"
"en un cilindre per sobre de %1. Sembla que la BIOS no pot arrencar\n"
-"les particions situades per sobre del límit de %1, la qual cosa significa que la instal·lació \n"
+"les particions situades per sobre del límit de %1, la qual cosa significa "
+"que la instal·lació \n"
"de %2 no es podrà arrencar directament.\n"
"\n"
"Voleu fer servir realment aquesta configuració?\n"
-#: src/include/partitioning/custom_part_check_generated.rb:416
+#: src/include/partitioning/custom_part_check_generated.rb:415
+#, fuzzy
msgid ""
"Warning: Some subvolumes of the root filesystem are shadowed by\n"
"mount points of other filesystem. This could lead to problems.\n"
-"\n"
+"%s\n"
"Really use this setup?\n"
msgstr ""
"Avís: alguns subvolums del sistema de fitxers d'arrel són tapats\n"
-"pels punts de muntatge d'altres sistemes de fitxers. Això podria comportar problemes.\n"
+"pels punts de muntatge d'altres sistemes de fitxers. Això podria comportar "
+"problemes.\n"
"\n"
"Realment voleu fer servir aquesta configuració?\n"
@@ -1167,10 +1202,12 @@
"\n"
"Really use this setup?\n"
msgstr ""
-"Atenció: en funció de la configuració actual, és possible que la instal·lació de %1\n"
+"Atenció: en funció de la configuració actual, és possible que la "
+"instal·lació de %1\n"
"no es pugui iniciar directament ja que\n"
"els fitxers per sota de \"/boot\" es troben en un dispositiu RAID.\n"
-"En algunes ocasions, l'inici del carregador d'arrencada falla en aquesta configuració.\n"
+"En algunes ocasions, l'inici del carregador d'arrencada falla en aquesta "
+"configuració.\n"
"\n"
"Realment voleu fer servir aquesta configuració?\n"
@@ -1236,14 +1273,16 @@
"You have not assigned a swap partition. In most cases, we highly recommend \n"
"to create and assign a swap partition.\n"
"Swap partitions on your system are listed in the main window with the\n"
-"type \"Linux Swap\". An assigned swap partition has the mount point \"swap\".\n"
+"type \"Linux Swap\". An assigned swap partition has the mount point \"swap"
+"\".\n"
"You can assign more than one swap partition, if desired.\n"
"\n"
"Really use the setup without swap partition?\n"
msgstr ""
"\n"
"No s'ha assignat cap partició d'intercanvi. Encara que això no és \n"
-"del tot incorrecte, és molt recomanable crear i activar una partició d'intercanvi.\n"
+"del tot incorrecte, és molt recomanable crear i activar una partició "
+"d'intercanvi.\n"
"Les particions d'intercanvi creades al sistema apareixen a la finestra\n"
"principal amb el tipus \"Linux Swap\".\n"
"Una partició d'intercanvi activada té el punt de muntatge \"swap\".\n"
@@ -1260,7 +1299,8 @@
"particularly in any of the following cases:\n"
msgstr ""
"\n"
-"Heu triat fer una instal·lació en una partició ja existent que no es formatarà.\n"
+"Heu triat fer una instal·lació en una partició ja existent que no es "
+"formatarà.\n"
"El YaST2 no pot garantir una instal·lació amb èxit, especialment en\n"
"els casos següents:\n"
@@ -1281,11 +1321,14 @@
#: src/include/partitioning/custom_part_check_generated.rb:534
msgid ""
"If in doubt, better go back and mark this partition for\n"
-"formatting, especially if it is assigned to one of the standard mount points\n"
+"formatting, especially if it is assigned to one of the standard mount "
+"points\n"
"like /, /boot, /opt or /var.\n"
msgstr ""
-"Si en teniu cap dubte, seria millor que tornéssiu enrere i que marquéssiu aquesta partició\n"
-"perquè es formati, especialment si està assignada a un dels punts de muntatge estàndard\n"
+"Si en teniu cap dubte, seria millor que tornéssiu enrere i que marquéssiu "
+"aquesta partició\n"
+"perquè es formati, especialment si està assignada a un dels punts de "
+"muntatge estàndard\n"
"com ara /, /boot, /opt o /var.\n"
#. continued popup text
@@ -1300,7 +1343,7 @@
"Realment voleu mantenir aquesta partició sense formatar?\n"
#. popup text %1 is replaced by a raid name e.g. md0
-#: src/include/partitioning/custom_part_check_generated.rb:595
+#: src/include/partitioning/custom_part_check_generated.rb:601
msgid ""
"The selected device belongs to the RAID (%1).\n"
"Remove it from the RAID before editing it.\n"
@@ -1309,7 +1352,7 @@
"Extraieu-lo del RAID abans d'editar-lo.\n"
#. popup text %1 is replaced by a name e.g. system
-#: src/include/partitioning/custom_part_check_generated.rb:606
+#: src/include/partitioning/custom_part_check_generated.rb:612
msgid ""
"The selected device belongs to a volume group (%1).\n"
"Remove it from the volume group before editing it.\n"
@@ -1318,7 +1361,7 @@
"Extraieu-lo del grup de volum abans d'editar-lo.\n"
#. popup text %1 is replaced by a name e.g. system
-#: src/include/partitioning/custom_part_check_generated.rb:616
+#: src/include/partitioning/custom_part_check_generated.rb:622
msgid ""
"The selected device is used by volume (%1).\n"
"Remove the volume before editing it.\n"
@@ -1327,7 +1370,7 @@
"Extraieu-lo del volum abans d'editar-lo.\n"
#. popup text %2 is a device name, %1 is the raid name
-#: src/include/partitioning/custom_part_check_generated.rb:649
+#: src/include/partitioning/custom_part_check_generated.rb:655
msgid ""
"The device (%2) belongs to the RAID (%1).\n"
"Remove it from the RAID before deleting it.\n"
@@ -1336,7 +1379,7 @@
"Extraieu-lo del RAID abans de suprimir-lo.\n"
#. popup text, %1 and %2 are device names
-#: src/include/partitioning/custom_part_check_generated.rb:660
+#: src/include/partitioning/custom_part_check_generated.rb:666
msgid ""
"The device (%2) is used by %1.\n"
"Remove %1 before deleting it.\n"
@@ -1344,34 +1387,39 @@
"%1 utilitza el dispositiu (%2).\n"
"Suprimiu %1 abans de suprimir el dispositiu.\n"
-#: src/include/partitioning/custom_part_check_generated.rb:672
+#: src/include/partitioning/custom_part_check_generated.rb:678
msgid "It cannot be deleted while mounted."
msgstr "No es pot suprimir mentre estigui muntat."
#. popup text, %1 is a device name
-#: src/include/partitioning/custom_part_check_generated.rb:708
+#: src/include/partitioning/custom_part_check_generated.rb:714
msgid ""
"The device (%1) cannot be removed since it is a logical partition and \n"
"another logical partition with a higher number is in use.\n"
msgstr ""
-"El dispositiu (%1) no es pot eliminar atès que es tracta d'una partició lògica i \n"
+"El dispositiu (%1) no es pot eliminar atès que es tracta d'una partició "
+"lògica i \n"
"ja s'està fent servir una altra partició lògica amb un número més gran.\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:784
+#: src/include/partitioning/custom_part_check_generated.rb:790
msgid ""
-"The selected extended partition contains partitions which are currently mounted:\n"
+"The selected extended partition contains partitions which are currently "
+"mounted:\n"
"%1\n"
-"We *strongly* recommend to unmount these partitions before you delete the extended partition.\n"
+"We *strongly* recommend to unmount these partitions before you delete the "
+"extended partition.\n"
"Choose Cancel unless you know exactly what you are doing.\n"
msgstr ""
-"La partició ampliada seleccionada conté les particions muntades en aquest moment:\n"
+"La partició ampliada seleccionada conté les particions muntades en aquest "
+"moment:\n"
"%1\n"
-"És altament recomanable desmuntar aquestes particions abans de suprimir la partició ampliada.\n"
+"És altament recomanable desmuntar aquestes particions abans de suprimir la "
+"partició ampliada.\n"
"Trieu Cancel·la si no teniu coneixements de com funciona.\n"
#. popup text, Do not translate LVM.
-#: src/include/partitioning/custom_part_check_generated.rb:802
+#: src/include/partitioning/custom_part_check_generated.rb:808
msgid ""
"\n"
"The selected extended partition contains at least one LVM partition\n"
@@ -1381,10 +1429,11 @@
msgstr ""
"\n"
"La partició ampliada seleccionada conté com a mínim una partició de LVM\n"
-"assignada a un grup del volum. En primer lloc, elimineu totes les particions dels grups de volum respectius, abans de suprimir la partició ampliada.\n"
+"assignada a un grup del volum. En primer lloc, elimineu totes les particions "
+"dels grups de volum respectius, abans de suprimir la partició ampliada.\n"
#. popup text, Do not translate RAID.
-#: src/include/partitioning/custom_part_check_generated.rb:813
+#: src/include/partitioning/custom_part_check_generated.rb:819
msgid ""
"\n"
"The selected extended partition contains at least one partition\n"
@@ -1398,7 +1447,7 @@
"dels sistemes RAID respectius, abans de suprimir la partició ampliada.\n"
#. popup text
-#: src/include/partitioning/custom_part_check_generated.rb:824
+#: src/include/partitioning/custom_part_check_generated.rb:830
msgid ""
"\n"
"The selected extended partition contains at least one partition\n"
@@ -1417,13 +1466,13 @@
#. label text
#: src/include/partitioning/custom_part_dialogs.rb:74
-#: src/include/partitioning/ep-dialogs.rb:768
-#: src/modules/StorageProposal.rb:6372
+#: src/include/partitioning/ep-dialogs.rb:806
+#: src/modules/StorageProposal.rb:6378
msgid "Do not forget what you enter here!"
msgstr "No oblideu el que escriviu aquí!"
#: src/include/partitioning/custom_part_dialogs.rb:78
-#: src/include/partitioning/ep-dialogs.rb:771
+#: src/include/partitioning/ep-dialogs.rb:809
msgid "Empty password allowed."
msgstr "Es permet deixar buida la contrasenya."
@@ -1452,7 +1501,7 @@
#. Label: get password for user root
#. Please use newline if label is longer than 40 characters
#: src/include/partitioning/custom_part_dialogs.rb:136
-#: src/include/partitioning/ep-dialogs.rb:796
+#: src/include/partitioning/ep-dialogs.rb:834
msgid "&Enter a Password for your File System:"
msgstr "Introduïu una &contrasenya per al sistema de fitxers:"
@@ -1463,7 +1512,7 @@
#. Label: get same password again for verification
#. Please use newline if label is longer than 40 characters
#: src/include/partitioning/custom_part_dialogs.rb:147
-#: src/include/partitioning/ep-dialogs.rb:780 src/modules/Storage.rb:4002
+#: src/include/partitioning/ep-dialogs.rb:818 src/modules/Storage.rb:4006
msgid "Reenter the Password for &Verification:"
msgstr "Torneu a introduir la contrasenya per &verificar-la:"
@@ -1486,7 +1535,7 @@
#. popup text
#. popup text
#: src/include/partitioning/custom_part_dialogs.rb:196
-#: src/modules/Storage.rb:3958
+#: src/modules/Storage.rb:3962
msgid ""
"You did not enter a password.\n"
"Try again.\n"
@@ -1497,7 +1546,7 @@
#. popup text
#. popup text
#: src/include/partitioning/custom_part_dialogs.rb:203
-#: src/modules/Storage.rb:3966
+#: src/modules/Storage.rb:3970
msgid ""
"The password must have at least %1 characters.\n"
"Try again.\n"
@@ -1530,26 +1579,32 @@
"Normally, a file system to mount is identified in /etc/fstab\n"
"by the device name. This identification can be changed so the file system \n"
"to mount is found by searching for a UUID or a volume label. Not all file \n"
-"systems can be mounted by UUID or a volume label. If an option is disabled, \n"
+"systems can be mounted by UUID or a volume label. If an option is "
+"disabled, \n"
"this is not possible.\n"
msgstr ""
"<p><b>Munta en /etc/fstab per:</b>\n"
"normalment, un sistema de fitxers que es munta es reconeix a /etc/fstab\n"
-"pel nom de dispositiu. Aquest nom es pot canviar per trobar el sistema de fitxers que\n"
-"es muntarà si es cerca per UUID o per etiquetes de volum. No tots els sistemes de fitxers\n"
-"es poden muntar per UUID o per etiqueta de volum. Si una opció està inhabilitada,\n"
+"pel nom de dispositiu. Aquest nom es pot canviar per trobar el sistema de "
+"fitxers que\n"
+"es muntarà si es cerca per UUID o per etiquetes de volum. No tots els "
+"sistemes de fitxers\n"
+"es poden muntar per UUID o per etiqueta de volum. Si una opció està "
+"inhabilitada,\n"
"això no serà possible.\n"
#. help text, richtext format
#: src/include/partitioning/custom_part_dialogs.rb:479
msgid ""
"<p><b>Volume Label:</b>\n"
-"The name entered in this field is used as the volume label. This usually makes sense only \n"
+"The name entered in this field is used as the volume label. This usually "
+"makes sense only \n"
"when you activate the option for mounting by volume label.\n"
"A volume label cannot contain the / character or spaces.\n"
msgstr ""
"<p><b>Etiqueta del volum:</b>\n"
-"el nom que introduïu aquest camp s'utilitzarà com l'etiqueta del volum. En general, només\n"
+"el nom que introduïu aquest camp s'utilitzarà com l'etiqueta del volum. En "
+"general, només\n"
"és recomanable quan activeu l'opció de muntar per etiqueta de volum.\n"
"L'etiqueta de volum no pot contenir el caràcter / ni cap espai.\n"
@@ -1672,11 +1727,13 @@
msgstr ""
"\n"
"La partició seleccionada (%1) actualment està muntada a %2.\n"
-"Si es canvia algun paràmetre (com ara el punt de muntatge o el tipus de sistema de fitxers),\n"
+"Si es canvia algun paràmetre (com ara el punt de muntatge o el tipus de "
+"sistema de fitxers),\n"
"es pot malmetre la instal·lació de Linux.\n"
"\n"
"Desmunteu la partició si és possible. Si no n'esteu segur,\n"
-"és recomanable cancel·lar l'operació. No continueu si no teniu coneixements \n"
+"és recomanable cancel·lar l'operació. No continueu si no teniu "
+"coneixements \n"
"de com funciona.\n"
"\n"
"Voleu continuar?\n"
@@ -1690,7 +1747,8 @@
msgstr ""
"\n"
"El YaST2 no pot reduir el sistema de fitxers de la partició.\n"
-"Només fat, ext2, ext3, ext4 i reiser permeten la reducció d'un sistema de fitxers."
+"Només fat, ext2, ext3, ext4 i reiser permeten la reducció d'un sistema de "
+"fitxers."
#. Popup text
#: src/include/partitioning/custom_part_dialogs.rb:1304
@@ -1701,7 +1759,8 @@
msgstr ""
"\n"
"El YaST2 no pot reduir el sistema de fitxers del volum lògic.\n"
-"Només fat, ext2, ext3, ext4 i reiser permeten la reducció d'un sistema de fitxers."
+"Només fat, ext2, ext3, ext4 i reiser permeten la reducció d'un sistema de "
+"fitxers."
#. Popup text
#: src/include/partitioning/custom_part_dialogs.rb:1316
@@ -1761,7 +1820,8 @@
"Shrink the file system now?"
msgstr ""
"\n"
-"Tot i que és possible reduir un sistema de fitxers reiser, aquesta funció està\n"
+"Tot i que és possible reduir un sistema de fitxers reiser, aquesta funció "
+"està\n"
"poc provada. És recomanable fer una còpia de seguretat de les dades.\n"
"\n"
"Voleu reduir el sistema de fitxers?"
@@ -1771,7 +1831,8 @@
msgid ""
"The selected device contains partitions that are currently mounted:\n"
"%1\n"
-"We *strongly* recommended to unmount these partitions before deleting the partition table.\n"
+"We *strongly* recommended to unmount these partitions before deleting the "
+"partition table.\n"
"Choose Cancel unless you know exactly what you are doing.\n"
msgstr ""
"El dispositiu seleccionat conté particions muntades:\n"
@@ -1831,7 +1892,9 @@
#: src/include/partitioning/custom_part_dialogs.rb:1548
msgid "<p>Enable automatic snapshots for a Btrfs filesystem with snapper.</p>"
-msgstr "<p>Habilita les instantànies automàtiques per al sistema de fitxers Btrfs amb Snapper.</p>"
+msgstr ""
+"<p>Habilita les instantànies automàtiques per al sistema de fitxers Btrfs "
+"amb Snapper.</p>"
#. label text
#: src/include/partitioning/custom_part_dialogs.rb:1562
@@ -1858,7 +1921,7 @@
#. TRANSLATOR: checkbox text
#. TRANSLATORS: checkbox text
#: src/include/partitioning/custom_part_dialogs.rb:1592
-#: src/modules/StorageProposal.rb:6226
+#: src/modules/StorageProposal.rb:6231
msgid "Enable Snapshots"
msgstr "Habilita instantànies"
@@ -1873,7 +1936,7 @@
msgid "Empty subvolume name not allowed."
msgstr "No es permet un nom de subvolum buit."
-#: src/include/partitioning/custom_part_dialogs.rb:1670
+#: src/include/partitioning/custom_part_dialogs.rb:1671
msgid ""
"Only subvolume names starting with \"%1\" currently allowed!\n"
"Automatically prepending \"%1\" to name of subvolume."
@@ -1881,11 +1944,11 @@
"Només es permeten noms de subvolums que comencin amb \"%1\"!\n"
"Establint automàticament com a pendent el nom \"%1\" per al subvolum."
-#: src/include/partitioning/custom_part_dialogs.rb:1680
+#: src/include/partitioning/custom_part_dialogs.rb:1681
msgid "Subvolume name %1 already exists."
msgstr "Ja existeix un subvolum amb el nom %1."
-#: src/include/partitioning/custom_part_dialogs.rb:1709
+#: src/include/partitioning/custom_part_dialogs.rb:1711
msgid "Modifications done so far in this dialog will be lost."
msgstr "Es perdrean les modificacions fetes fins ara en aquest diàleg."
@@ -1928,54 +1991,63 @@
#. helptext
#: src/include/partitioning/custom_part_helptexts.rb:87
-#: src/include/partitioning/ep-dialogs.rb:708
+#: src/include/partitioning/ep-dialogs.rb:746
msgid ""
"<p>\n"
-"This mount point corresponds to a temporary filesystem like /tmp or /var/tmp.\n"
+"This mount point corresponds to a temporary filesystem like /tmp or /var/"
+"tmp.\n"
"If you leave the encryption password empty, the system will create\n"
"a random password at system startup for you. This means, you will lose all\n"
"data on these filesystems at system shutdown.\n"
"</p>\n"
msgstr ""
"<p>\n"
-"Aquest punt de muntatge correspon a un sistema de fitxers temporals, com ara /tmp o /var/tmp.\n"
+"Aquest punt de muntatge correspon a un sistema de fitxers temporals, com "
+"ara /tmp o /var/tmp.\n"
"Si deixeu en blanc la contrasenya d'encriptació, el sistema crearà\n"
-"una contrasenya aleatòria en iniciar el sistema. Això significa que perdreu totes\n"
+"una contrasenya aleatòria en iniciar el sistema. Això significa que perdreu "
+"totes\n"
"les dades d'aquests sistemes de fitxers en apagar el sistema.\n"
"</p>\n"
#. help text, continued
#. helptext
#: src/include/partitioning/custom_part_helptexts.rb:100
-#: src/include/partitioning/ep-dialogs.rb:723
+#: src/include/partitioning/ep-dialogs.rb:761
msgid ""
"<p>\n"
-"If you forget your password, you will lose access to the data on your file system.\n"
+"If you forget your password, you will lose access to the data on your file "
+"system.\n"
"Choose your password carefully. A combination of letters and numbers\n"
"is recommended. To ensure the password was entered correctly,\n"
"enter it twice.\n"
"</p>\n"
msgstr ""
"<p>\n"
-"Si no recordeu la contrasenya, no podreu accedir a les dades del sistema de fitxers.\n"
-"Trieu la contrasenya amb deteniment. Es recomana que sigui una combinació de lletres\n"
-"i xifres. Com a mesura per a assegurar que l'heu introduïda correctament, l'haureu\n"
+"Si no recordeu la contrasenya, no podreu accedir a les dades del sistema de "
+"fitxers.\n"
+"Trieu la contrasenya amb deteniment. Es recomana que sigui una combinació de "
+"lletres\n"
+"i xifres. Com a mesura per a assegurar que l'heu introduïda correctament, "
+"l'haureu\n"
"d'escriure dues vegades.\n"
"</p>\n"
#. help text, continued
#. helptext, %1 is replaced by integer
#: src/include/partitioning/custom_part_helptexts.rb:114
-#: src/include/partitioning/ep-dialogs.rb:737
+#: src/include/partitioning/ep-dialogs.rb:775
msgid ""
"<p>\n"
-"You must distinguish between uppercase and lowercase. A password should have at\n"
+"You must distinguish between uppercase and lowercase. A password should have "
+"at\n"
"least %1 characters and, as a rule, not contain any special characters\n"
"(e.g., letters with accents or umlauts).\n"
"</p>\n"
msgstr ""
"<p>\n"
-"S’ha de distingir entre majúscules i minúscules; a més, una contrasenya ha de tenir com a\n"
+"S’ha de distingir entre majúscules i minúscules; a més, una contrasenya ha "
+"de tenir com a\n"
"mínim %1 de caràcters i no pot contenir cap caràcter especial\n"
"(p. ex., lletres accentuades o amb dièresi).\n"
"</p>\n"
@@ -1998,7 +2070,7 @@
#. help text, continued
#. helptext
#: src/include/partitioning/custom_part_helptexts.rb:142
-#: src/include/partitioning/ep-dialogs.rb:749
+#: src/include/partitioning/ep-dialogs.rb:787
msgid ""
"<p>\n"
"Do not forget this password!\n"
@@ -2023,14 +2095,16 @@
#: src/include/partitioning/custom_part_helptexts.rb:159
msgid ""
"<p>\n"
-"If the encrypted file system does not contain any system file and therefore is\n"
+"If the encrypted file system does not contain any system file and therefore "
+"is\n"
"not needed for the update, you may select <b>Skip</b>. In this case, the\n"
"file system is not accessed during update.\n"
"</p>\n"
msgstr ""
"<p>\n"
"Si el sistema de fitxers xifrat no conté cap fitxer de sistema i, per tant,\n"
-"l'actualització no és necessària, podeu seleccionar <b>Omet</b>. En aquest cas,\n"
+"l'actualització no és necessària, podeu seleccionar <b>Omet</b>. En aquest "
+"cas,\n"
"no s'accedeix al sistema de fitxers durant l'actualització.\n"
"</p>\n"
@@ -2051,7 +2125,8 @@
"\n"
"És probable que no es pugui arrencar aquesta configuració.\n"
"\n"
-"Si necessiteu utilitzar aquest disc per a la instal·lació, hauríeu d'eliminar\n"
+"Si necessiteu utilitzar aquest disc per a la instal·lació, hauríeu "
+"d'eliminar\n"
"l'etiqueta del disc amb el partidor en mode Expert.\n"
#: src/include/partitioning/custom_part_helptexts.rb:187
@@ -2089,7 +2164,8 @@
"Really do this?\n"
msgstr ""
"Heu seleccionat l’opció de no muntar automàticament un sistema de fitxers\n"
-"durant l’inici que podria contenir fitxers necessaris per a un funcionament correcte del sistema.\n"
+"durant l’inici que podria contenir fitxers necessaris per a un funcionament "
+"correcte del sistema.\n"
"\n"
"Aquesta opció pot comportar problemes.\n"
" \n"
@@ -2104,7 +2180,8 @@
"nonloopbacked file system.\n"
msgstr ""
"Heu assignat un sistema de fitxers xifrats a una\n"
-"partició amb un dels següents punts de muntatge: \"/\", \"/usr\", \"/boot\",\n"
+"partició amb un dels següents punts de muntatge: \"/\", \"/usr\", \"/boot"
+"\",\n"
"/var\". Això no és possible. Canvieu el punt de muntatge o utilitzeu un\n"
"sistema de fitxers que no sigui de bucle de retorn.\n"
@@ -2141,7 +2218,8 @@
#. error popup
#: src/include/partitioning/custom_part_lib.rb:214
msgid "Only swap devices may have swap as mount point."
-msgstr "Només els dispositius d'intercanvi poden tenir el punt de muntatge swap."
+msgstr ""
+"Només els dispositius d'intercanvi poden tenir el punt de muntatge swap."
#. && mount!="swap" )
#. error popup text
@@ -2160,8 +2238,11 @@
#. error popup text
#: src/include/partitioning/custom_part_lib.rb:248
-msgid "Invalid character in mount point. Do not use \"`'!\"%#\" in a mount point."
-msgstr "Hi ha un caràcter no vàlid al punt de muntatge. No utilitzeu \"`'!%#\" en un punt de muntatge."
+msgid ""
+"Invalid character in mount point. Do not use \"`'!\"%#\" in a mount point."
+msgstr ""
+"Hi ha un caràcter no vàlid al punt de muntatge. No utilitzeu \"`'!%#\" en un "
+"punt de muntatge."
#. error popup text
#: src/include/partitioning/custom_part_lib.rb:257
@@ -2208,7 +2289,7 @@
"a un dispositiu que tingui un sistema de fitxers no existent o desconegut."
#. warning message, %1 is replaced by fs name (e.g. Ext3)
-#: src/include/partitioning/custom_part_lib.rb:491
+#: src/include/partitioning/custom_part_lib.rb:482
msgid ""
"\n"
"WARNING:\n"
@@ -2232,12 +2313,12 @@
#. //////////////////////////////////////////////
#. modify map new
-#: src/include/partitioning/custom_part_lib.rb:919
-#: src/include/partitioning/custom_part_lib.rb:946
+#: src/include/partitioning/custom_part_lib.rb:924
+#: src/include/partitioning/custom_part_lib.rb:951
msgid "The file system is currently mounted on %1."
msgstr "El sistema de fitxers està muntat actualment a %1."
-#: src/include/partitioning/custom_part_lib.rb:924
+#: src/include/partitioning/custom_part_lib.rb:929
msgid ""
"You can try to unmount it now, continue without unmounting or cancel.\n"
"Click Cancel unless you know exactly what you are doing."
@@ -2247,12 +2328,12 @@
#. button text
#. button text
-#: src/include/partitioning/custom_part_lib.rb:935
-#: src/include/partitioning/custom_part_lib.rb:960
+#: src/include/partitioning/custom_part_lib.rb:940
+#: src/include/partitioning/custom_part_lib.rb:965
msgid "Unmount"
msgstr "Desmunta"
-#: src/include/partitioning/custom_part_lib.rb:951
+#: src/include/partitioning/custom_part_lib.rb:956
msgid ""
"You can try to unmount it now or cancel.\n"
"Click Cancel unless you know exactly what you are doing."
@@ -2260,17 +2341,18 @@
"Podeu provar de desmuntar-ho ara o cancel·lar.\n"
"Cliqueu a cancel·lar si no saber exactament què esteu fent."
-#: src/include/partitioning/custom_part_lib.rb:997
+#: src/include/partitioning/custom_part_lib.rb:1002
msgid "It is not possible to shrink the file system while it is mounted."
msgstr "No es pot encongir el sistema de fitxers mentre estigui muntat."
-#: src/include/partitioning/custom_part_lib.rb:1010
+#: src/include/partitioning/custom_part_lib.rb:1015
msgid "It is not possible to extend the file system while it is mounted."
msgstr "No es pot engrandir el sistema de fitxers mentre estigui muntat."
-#: src/include/partitioning/custom_part_lib.rb:1021
+#: src/include/partitioning/custom_part_lib.rb:1026
msgid "It is not possible to resize the file system while it is mounted."
-msgstr "No es pot canviar la mida del sistema de fitxers mentre estigui muntat."
+msgstr ""
+"No es pot canviar la mida del sistema de fitxers mentre estigui muntat."
#. push button text
#: src/include/partitioning/ep-all.rb:80
@@ -2354,7 +2436,8 @@
"navigate to the view with detailed information about the device.</p>"
msgstr ""
"<p>Si seleccioneu una entrada de taula podeu\n"
-"navegar a la visualització que conté informació detallada sobre el dispositiu.</p>"
+"navegar a la visualització que conté informació detallada sobre el "
+"dispositiu.</p>"
#. popup text
#: src/include/partitioning/ep-all.rb:233
@@ -2691,32 +2774,38 @@
msgstr "<p>Trieu el rol del dispositiu.</p>"
#. radio button text
-#: src/include/partitioning/ep-dialogs.rb:55
+#: src/include/partitioning/ep-dialogs.rb:56
+#, fuzzy
+msgid "EFI Boot Partition"
+msgstr "Formata la partició"
+
+#. radio button text
+#: src/include/partitioning/ep-dialogs.rb:64
msgid "Operating System"
msgstr "Sistema operatiu"
#. radio button text
-#: src/include/partitioning/ep-dialogs.rb:60
+#: src/include/partitioning/ep-dialogs.rb:69
msgid "Data and ISV Applications"
msgstr "Aplicacions i dades ISV"
#. radio button text
-#: src/include/partitioning/ep-dialogs.rb:65
+#: src/include/partitioning/ep-dialogs.rb:75
msgid "Swap"
msgstr "Intercanvi"
#. radio button text
-#: src/include/partitioning/ep-dialogs.rb:70
+#: src/include/partitioning/ep-dialogs.rb:80
msgid "Raw Volume (unformatted)"
msgstr "Volum cru (no formatat)"
#. heading for a frame in a dialog
-#: src/include/partitioning/ep-dialogs.rb:78
+#: src/include/partitioning/ep-dialogs.rb:88
msgid "Role"
msgstr "Rol"
#. helptext
-#: src/include/partitioning/ep-dialogs.rb:107
+#: src/include/partitioning/ep-dialogs.rb:120
msgid ""
"<p>First, choose whether the partition should be\n"
"formatted and the desired file system type.</p>"
@@ -2725,18 +2814,20 @@
"i quin tipus de partició voleu crear.</p>"
#. helptext
-#: src/include/partitioning/ep-dialogs.rb:114
+#: src/include/partitioning/ep-dialogs.rb:127
msgid ""
"<p>If you want to encrypt all data on the\n"
-"volume, select <b>Encrypt Device</b>. Changing the encryption on an existing\n"
+"volume, select <b>Encrypt Device</b>. Changing the encryption on an "
+"existing\n"
"volume will delete all data on it.</p>\n"
msgstr ""
"<p>Si voleu encriptar totes les dades del\n"
-"volum, seleccioneu <b>Encriptar el dispositiu</b>. Canviar l'encriptació d'un volum ja existent\n"
+"volum, seleccioneu <b>Encriptar el dispositiu</b>. Canviar l'encriptació "
+"d'un volum ja existent\n"
"n'esborrarà totes les dades.</p>\n"
#. helptext
-#: src/include/partitioning/ep-dialogs.rb:124
+#: src/include/partitioning/ep-dialogs.rb:137
msgid ""
"<p>Then, choose whether the partition should\n"
"be mounted and enter the mount point (/, /boot, /home, /var, etc.).</p>"
@@ -2745,47 +2836,47 @@
"i introduïu el punt de muntatge (/, /boot, /home, /var, etc.).</p>"
#. set globals
-#: src/include/partitioning/ep-dialogs.rb:309
+#: src/include/partitioning/ep-dialogs.rb:337
msgid "Formatting Options"
msgstr "Opcions de format"
-#: src/include/partitioning/ep-dialogs.rb:317
+#: src/include/partitioning/ep-dialogs.rb:345
msgid "Format partition"
msgstr "Formata la partició"
-#: src/include/partitioning/ep-dialogs.rb:328
+#: src/include/partitioning/ep-dialogs.rb:356
msgid "Do not format partition"
msgstr "No formatis la partició"
-#: src/include/partitioning/ep-dialogs.rb:344
+#: src/include/partitioning/ep-dialogs.rb:372
msgid "Do not mount partition"
msgstr "No muntis la partició"
-#: src/include/partitioning/ep-dialogs.rb:363
+#: src/include/partitioning/ep-dialogs.rb:391
msgid "Mounting Options"
msgstr "Opcions de muntatge"
-#: src/include/partitioning/ep-dialogs.rb:371
+#: src/include/partitioning/ep-dialogs.rb:399
msgid "Mount partition"
msgstr "Munta la partició"
#. Column header
-#: src/include/partitioning/ep-dialogs.rb:377 src/modules/StorageFields.rb:144
+#: src/include/partitioning/ep-dialogs.rb:405 src/modules/StorageFields.rb:144
msgid "Mount Point"
msgstr "Punt de muntatge"
#. button text
-#: src/include/partitioning/ep-dialogs.rb:384
+#: src/include/partitioning/ep-dialogs.rb:412
msgid "Fs&tab Options..."
msgstr "Opcions de fs&tab..."
#. error popup
-#: src/include/partitioning/ep-dialogs.rb:558
+#: src/include/partitioning/ep-dialogs.rb:596
msgid "Crypt files must be encrypted."
msgstr "Els fitxers crypt han d'estar xifrats."
#. error popup
-#: src/include/partitioning/ep-dialogs.rb:569
+#: src/include/partitioning/ep-dialogs.rb:607
msgid ""
"You chose to create the crypt file, but did not specify\n"
"that it should be formatted. This does not make sense.\n"
@@ -2798,17 +2889,17 @@
"Comproveu també l'opció de formatació.\n"
#. error popup
-#: src/include/partitioning/ep-dialogs.rb:585
+#: src/include/partitioning/ep-dialogs.rb:623
msgid "Crypt files require a mount point."
msgstr "Cal un punt de muntatge per als fitxers crypt."
#. error popup
-#: src/include/partitioning/ep-dialogs.rb:599
+#: src/include/partitioning/ep-dialogs.rb:637
msgid "Tmpfs requires a mount point."
msgstr "Cal un punt de muntatge per a Tmpfs ."
#. helptext
-#: src/include/partitioning/ep-dialogs.rb:683
+#: src/include/partitioning/ep-dialogs.rb:721
msgid ""
"<p>\n"
"Keep in mind that this file system is only protected when it is not\n"
@@ -2823,7 +2914,7 @@
"</p>"
#. helptext
-#: src/include/partitioning/ep-dialogs.rb:696
+#: src/include/partitioning/ep-dialogs.rb:734
msgid ""
"<p>\n"
"The file system used for this volume is swap. You can leave the encryption \n"
@@ -2832,26 +2923,28 @@
"</p>\n"
msgstr ""
"<p>\n"
-"El sistema de fitxers que s'utilitza en aquest volum és d'intercanvi. Podeu deixar buida\n"
-"la contrasenya d'encriptació però, en aquest cas, el dispositiu d'intercanvi no es podrà\n"
+"El sistema de fitxers que s'utilitza en aquest volum és d'intercanvi. Podeu "
+"deixar buida\n"
+"la contrasenya d'encriptació però, en aquest cas, el dispositiu d'intercanvi "
+"no es podrà\n"
"utilitzar per hibernar (suspendre al disc).\n"
"</p>\n"
-#: src/include/partitioning/ep-dialogs.rb:766
+#: src/include/partitioning/ep-dialogs.rb:804
msgid "All data stored on the volume will be lost!"
msgstr "Es perdran totes les dades del volum!"
-#: src/include/partitioning/ep-dialogs.rb:789
+#: src/include/partitioning/ep-dialogs.rb:827
msgid "Password"
msgstr "Contrasenya"
#. popup text
-#: src/include/partitioning/ep-dialogs.rb:886
+#: src/include/partitioning/ep-dialogs.rb:924
msgid "Resize not supported by underlying device."
msgstr "Canvi de mida no suportat pel dispositiu subjacent."
#. popup text
-#: src/include/partitioning/ep-dialogs.rb:891
+#: src/include/partitioning/ep-dialogs.rb:929
msgid ""
"\n"
"You cannot resize the selected partition because the file system\n"
@@ -2861,7 +2954,7 @@
"No es pot redimensionar la partició seleccionada perquè el sistema\n"
"de fitxers d’aquesta partició no admet el redimensionament.\n"
-#: src/include/partitioning/ep-dialogs.rb:915
+#: src/include/partitioning/ep-dialogs.rb:953
msgid ""
"It is not possible to check whether a NTFS\n"
"can be resized while it is mounted."
@@ -2870,7 +2963,7 @@
"es pot redimensionar mentre estigui muntada."
#. FIXME: Really?
-#: src/include/partitioning/ep-dialogs.rb:934
+#: src/include/partitioning/ep-dialogs.rb:972
msgid ""
"Partition %1 cannot be resized\n"
"because the filesystem seems to be inconsistent.\n"
@@ -2879,21 +2972,21 @@
"perquè sembla que hi ha incoherències al sistema de fitxers.\n"
#. Heading for dialog
-#: src/include/partitioning/ep-dialogs.rb:961
+#: src/include/partitioning/ep-dialogs.rb:999
msgid "Resize Partition %1"
msgstr "Canvia la mida de la partició %1"
#. Heading for dialog
-#: src/include/partitioning/ep-dialogs.rb:982
+#: src/include/partitioning/ep-dialogs.rb:1020
msgid "Resize Logical Volume %1"
msgstr "Canvia la mida del volum lògic %1"
#. size_k + min_size_k could be > max_size_k
-#: src/include/partitioning/ep-dialogs.rb:1014
+#: src/include/partitioning/ep-dialogs.rb:1052
msgid "Current size: %1"
msgstr "Mida actual: %1"
-#: src/include/partitioning/ep-dialogs.rb:1026
+#: src/include/partitioning/ep-dialogs.rb:1064
msgid "Currently used: %1"
msgstr "Usat actualment: %1"
@@ -2901,8 +2994,8 @@
#. input field label
#. combo box label
#. Column header
-#: src/include/partitioning/ep-dialogs.rb:1039
-#: src/include/partitioning/ep-dialogs.rb:1076
+#: src/include/partitioning/ep-dialogs.rb:1077
+#: src/include/partitioning/ep-dialogs.rb:1114
#: src/include/partitioning/ep-hd-dialogs.rb:256
#: src/include/partitioning/ep-loop-dialogs.rb:118
#: src/include/partitioning/ep-lvm-dialogs.rb:559
@@ -2914,43 +3007,44 @@
#. radio button text, %1 is replaced by size
#. radio button text, %1 is replaced by size
-#: src/include/partitioning/ep-dialogs.rb:1049
+#: src/include/partitioning/ep-dialogs.rb:1087
#: src/include/partitioning/ep-hd-dialogs.rb:242
#: src/include/partitioning/ep-lvm-dialogs.rb:535
msgid "Maximum Size (%1)"
msgstr "Mida màxima (%1)"
#. radio button text, %1 is replaced by size
-#: src/include/partitioning/ep-dialogs.rb:1059
+#: src/include/partitioning/ep-dialogs.rb:1097
msgid "Minimum Size (%1)"
msgstr "Mida mínima (%1)"
#. radio button text
#. radio button text
-#: src/include/partitioning/ep-dialogs.rb:1068
+#: src/include/partitioning/ep-dialogs.rb:1106
#: src/include/partitioning/ep-hd-dialogs.rb:251
#: src/include/partitioning/ep-lvm-dialogs.rb:568
msgid "Custom Size"
msgstr "Mida personalitzada"
#. help text
-#: src/include/partitioning/ep-dialogs.rb:1102
+#: src/include/partitioning/ep-dialogs.rb:1140
msgid "<p>Choose new size.</p>"
msgstr "<p>Escolliu una nova mida.</p>"
#. error popup, %1 and %2 are replaced by sizes
#. error popup, %1 and %2 are replaced by sizes
-#: src/include/partitioning/ep-dialogs.rb:1153
+#: src/include/partitioning/ep-dialogs.rb:1191
#: src/include/partitioning/ep-hd-dialogs.rb:359
#: src/include/partitioning/ep-lvm-dialogs.rb:692
msgid "The size entered is invalid. Enter a size between %1 and %2."
-msgstr "La mida que heu introduït no és vàlida. Introduïu una mida entre %1 i %2."
+msgstr ""
+"La mida que heu introduït no és vàlida. Introduïu una mida entre %1 i %2."
#. FIXME: To check whether the part. can be resized only
#. after user tries to do that is stupid - in some cases
#. we can tell beforehand, thus user should never get to this
#. point (e.g. when the partition is mounted)
-#: src/include/partitioning/ep-dialogs.rb:1196
+#: src/include/partitioning/ep-dialogs.rb:1234
msgid ""
"You are extending a mounted filesystem by %1 Gigabyte. \n"
"This may be quite slow and can take hours. You might possibly want \n"
@@ -2959,16 +3053,17 @@
msgstr ""
"Esteu ampliant un sistema de fitxers muntat amb %1 Gigabytes.\n"
"Això pot ser molt lent i podria trigar fins i tot hores. Podríeu considerar\n"
-"desmuntar el sistema de fitxers, la qual cosa faria molt més ràpida la feina de\n"
+"desmuntar el sistema de fitxers, la qual cosa faria molt més ràpida la feina "
+"de\n"
"redimensionar-lo. "
#. label for log view
-#: src/include/partitioning/ep-dialogs.rb:1272
+#: src/include/partitioning/ep-dialogs.rb:1310
msgid "Output of %1"
msgstr "Sortida de %1"
#. popup text
-#: src/include/partitioning/ep-dialogs.rb:1299
+#: src/include/partitioning/ep-dialogs.rb:1337
msgid "Rescanning disks..."
msgstr "Es tornen a escanejar els discs..."
@@ -3005,7 +3100,8 @@
msgstr ""
"<p>Aquesta visualització mostra tots els dispositius\n"
"del mapador de dispositius, llevat dels que ja apareixen en alguna altra\n"
-"visualització. Per tant, no es mostren els discs multicamí, els volums lògics d'LVM ni els RAID de la BIOS.</p>\n"
+"visualització. Per tant, no es mostren els discs multicamí, els volums "
+"lògics d'LVM ni els RAID de la BIOS.</p>\n"
#. helptext
#: src/include/partitioning/ep-dm.rb:161
@@ -3160,50 +3256,50 @@
msgstr "La regió que heu introduït no és vàlida."
#. dialog title
-#: src/include/partitioning/ep-hd-dialogs.rb:548
+#: src/include/partitioning/ep-hd-dialogs.rb:549
msgid "Add Partition on %1"
msgstr "Afegeix la partició a %1"
#. dialog title
-#: src/include/partitioning/ep-hd-dialogs.rb:594
+#: src/include/partitioning/ep-hd-dialogs.rb:595
msgid "Edit Partition %1"
msgstr "Edita la partició %1"
#. error popup text, %1 is replace with name of partition
-#: src/include/partitioning/ep-hd-dialogs.rb:627
+#: src/include/partitioning/ep-hd-dialogs.rb:628
msgid "No space to moved partition %1."
msgstr "No hi ha espai per a la partició desplaçada %1."
#. popup text, %1 is replace with name of partition
-#: src/include/partitioning/ep-hd-dialogs.rb:637
+#: src/include/partitioning/ep-hd-dialogs.rb:638
msgid "Move partition %1 forward?"
msgstr "Moure la partició %1 endavant?"
#. popup text, %1 is replace with name of partition
-#: src/include/partitioning/ep-hd-dialogs.rb:646
+#: src/include/partitioning/ep-hd-dialogs.rb:647
msgid "Move partition %1 backward?"
msgstr "Moure la partició %1 enrere?"
#. popup text, %1 is replace with name of partition
-#: src/include/partitioning/ep-hd-dialogs.rb:665
+#: src/include/partitioning/ep-hd-dialogs.rb:666
msgid "Move partition %1?"
msgstr "Moure la partició %1?"
#. radio button text
-#: src/include/partitioning/ep-hd-dialogs.rb:667
+#: src/include/partitioning/ep-hd-dialogs.rb:668
msgid "Forward"
msgstr "Endavant"
#. radio button text
-#: src/include/partitioning/ep-hd-dialogs.rb:669
+#: src/include/partitioning/ep-hd-dialogs.rb:670
msgid "Backward"
msgstr "Enrere"
-#: src/include/partitioning/ep-hd-dialogs.rb:725
+#: src/include/partitioning/ep-hd-dialogs.rb:726
msgid "Confirm Deleting of All Partitions"
msgstr "Confirma la supressió de totes les particions"
-#: src/include/partitioning/ep-hd-dialogs.rb:727
+#: src/include/partitioning/ep-hd-dialogs.rb:728
msgid ""
"The disk \"%1\" contains at least one partition.\n"
"If you proceed, the following partitions will be deleted:"
@@ -3211,30 +3307,35 @@
"El disc \"%1\" conté com a mínim una partició.\n"
"Si continueu, s'eliminaran les particions següents:"
-#: src/include/partitioning/ep-hd-dialogs.rb:732
+#: src/include/partitioning/ep-hd-dialogs.rb:733
msgid "Really delete all partitions on \"%1\"?"
msgstr "Esteu segur que voleu suprimir totes les particions a \"%1\"?"
#. error popup
#. error popup
#: src/include/partitioning/ep-hd-lib.rb:42
-#: src/include/partitioning/ep-hd-lib.rb:245
+#: src/include/partitioning/ep-hd-lib.rb:251
msgid "No hard disk selected."
msgstr "No s’ha seleccionat cap disc."
#. error popup
+#: src/include/partitioning/ep-hd-lib.rb:51
+msgid "Cannot create partition table on LDL formatted DASD."
+msgstr ""
+
+#. error popup
#. TRANSLATORS: error popup
-#: src/include/partitioning/ep-hd-lib.rb:51 src/modules/Storage.rb:5240
+#: src/include/partitioning/ep-hd-lib.rb:57 src/modules/Storage.rb:5250
msgid "The disk is in use and cannot be modified."
msgstr "El disc s'està utilitzant i no es pot modificar."
#. dialog heading
-#: src/include/partitioning/ep-hd-lib.rb:86
+#: src/include/partitioning/ep-hd-lib.rb:92
msgid "Select new partition table type for %1."
msgstr "Seleccioneu el tipus de la taula de particions nova de %1."
#. popup text, %1 is be replaced by disk name e.g. /dev/sda
-#: src/include/partitioning/ep-hd-lib.rb:111
+#: src/include/partitioning/ep-hd-lib.rb:117
msgid ""
"Really create new partition table on %1? This will delete all data\n"
"on %1 and all RAIDs and Volume Groups using partitions on %1."
@@ -3244,29 +3345,29 @@
"que utilitzin particions del disc %1."
#. error popup
-#: src/include/partitioning/ep-hd-lib.rb:131
+#: src/include/partitioning/ep-hd-lib.rb:137
msgid "No disk selected."
msgstr "No s’ha seleccionat cap disc."
#. popup text
#. Must be called before removing device.
-#: src/include/partitioning/ep-hd-lib.rb:145
-#: src/include/partitioning/ep-lib.rb:199
+#: src/include/partitioning/ep-hd-lib.rb:151
+#: src/include/partitioning/ep-lib.rb:202
msgid "Really delete BIOS RAID %1?"
msgstr "Segur que voleu suprimir el RAID de la BIOS %1?"
#. popup text
-#: src/include/partitioning/ep-hd-lib.rb:159
+#: src/include/partitioning/ep-hd-lib.rb:165
msgid "Really delete Partitioned RAID %1?"
msgstr "Esteu segur que voleu suprimir el particionament RAID %1?"
#. error ppup
-#: src/include/partitioning/ep-hd-lib.rb:176
+#: src/include/partitioning/ep-hd-lib.rb:182
msgid "There are no partitions to delete on this disk."
msgstr "No hi ha cap partició per eliminar en aquest disc."
#. error popup
-#: src/include/partitioning/ep-hd-lib.rb:229
+#: src/include/partitioning/ep-hd-lib.rb:235
msgid "It is not possible to create a partition on %1."
msgstr "No es pot crear una partició a %1."
@@ -3274,15 +3375,15 @@
#. error popup
#. error popup
#. error popup
-#: src/include/partitioning/ep-hd-lib.rb:321
-#: src/include/partitioning/ep-hd-lib.rb:370
-#: src/include/partitioning/ep-hd-lib.rb:426
-#: src/include/partitioning/ep-hd-lib.rb:483
+#: src/include/partitioning/ep-hd-lib.rb:327
+#: src/include/partitioning/ep-hd-lib.rb:376
+#: src/include/partitioning/ep-hd-lib.rb:432
+#: src/include/partitioning/ep-hd-lib.rb:489
msgid "No partition selected."
msgstr "No s’ha seleccionat cap partició."
#. error popup, %1 is replace by partition device name e.g. /dev/sdb1
-#: src/include/partitioning/ep-hd-lib.rb:334
+#: src/include/partitioning/ep-hd-lib.rb:340
msgid ""
"The partition %1 is in use. It cannot be\n"
"edited. To edit %1, make sure it is not used."
@@ -3291,12 +3392,12 @@
"Per editar %1, assegureu-vos que no s'està utilitzant."
#. error popup text
-#: src/include/partitioning/ep-hd-lib.rb:345
+#: src/include/partitioning/ep-hd-lib.rb:351
msgid "An extended partition cannot be edited."
msgstr "No es pot editar una partició ampliada."
#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1
-#: src/include/partitioning/ep-hd-lib.rb:387
+#: src/include/partitioning/ep-hd-lib.rb:393
msgid ""
"The partition %1 is already created on disk\n"
"and cannot be moved."
@@ -3305,12 +3406,12 @@
"i no es pot moure."
#. error popup text
-#: src/include/partitioning/ep-hd-lib.rb:398
+#: src/include/partitioning/ep-hd-lib.rb:404
msgid "An extended partition cannot be moved."
msgstr "No es pot moure una partició extesa."
#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1
-#: src/include/partitioning/ep-hd-lib.rb:443
+#: src/include/partitioning/ep-hd-lib.rb:449
msgid ""
"The partition %1 is in use. It cannot be\n"
"resized. To resize %1, make sure it is not used."
@@ -3319,12 +3420,12 @@
"Per canviar la mida de %1, assegureu-vos que no s'està utilitzant."
#. error popup text
-#: src/include/partitioning/ep-hd-lib.rb:454
+#: src/include/partitioning/ep-hd-lib.rb:460
msgid "An extended partition cannot be resized."
msgstr "No es pot canviar la mida d'una partició ampliada."
#. helptext
-#: src/include/partitioning/ep-hd-lib.rb:527
+#: src/include/partitioning/ep-hd-lib.rb:533
msgid ""
"<p>Select one or more (if available) hard disks\n"
"that will have the same partition layout as\n"
@@ -3340,7 +3441,7 @@
"particions. Després del clonatge, aquestes\n"
"particions s'esborraran.</p>\n"
-#: src/include/partitioning/ep-hd-lib.rb:573
+#: src/include/partitioning/ep-hd-lib.rb:579
msgid ""
"The following partitions will be deleted\n"
"and all data on them will be lost:"
@@ -3348,11 +3449,11 @@
"S'eliminaran les següents particions i\n"
"se'n perdran totes les dades:"
-#: src/include/partitioning/ep-hd-lib.rb:580
+#: src/include/partitioning/ep-hd-lib.rb:586
msgid "Really delete these partitions?"
msgstr "Esteu segur que voleu suprimir aquestes particions?"
-#: src/include/partitioning/ep-hd-lib.rb:596
+#: src/include/partitioning/ep-hd-lib.rb:602
msgid ""
"There are no partitions on this disk, but a clonable\n"
"disk must have at least one partition.\n"
@@ -3362,7 +3463,7 @@
"clonable n'ha de tenir com a mínim una.\n"
"Creeu particions abans de clonar el disc.\n"
-#: src/include/partitioning/ep-hd-lib.rb:609
+#: src/include/partitioning/ep-hd-lib.rb:615
msgid ""
"This disk cannot be cloned. There are no suitable\n"
"disks that could have the same partitioning layout."
@@ -3370,20 +3471,20 @@
"Aquest disc no es pot clonar. No hi ha cap disc que\n"
"pugui tenir el mateix esquema de particions."
-#: src/include/partitioning/ep-hd-lib.rb:638
+#: src/include/partitioning/ep-hd-lib.rb:644
msgid "Clone partition layout of %1"
msgstr "Clona la disposició de particions de %1"
-#: src/include/partitioning/ep-hd-lib.rb:642
+#: src/include/partitioning/ep-hd-lib.rb:648
msgid "Available target disks:"
msgstr "Discs diponibles com a destinació:"
-#: src/include/partitioning/ep-hd-lib.rb:670
+#: src/include/partitioning/ep-hd-lib.rb:676
msgid "Select a target disk for creating a clone"
msgstr "Seleccioneu un disc com a destinació per crear-ne un clon"
#. popup text, %1 is replaced by a dasd name e.g. /dev/dasda
-#: src/include/partitioning/ep-hd-lib.rb:751
+#: src/include/partitioning/ep-hd-lib.rb:757
msgid ""
"Running dasdfmt deletes all data on the disk.\n"
"Really execute dasdfmt on disk %1?\n"
@@ -3392,7 +3493,7 @@
"Esteu segur que voleu executar dasdfmt al disc %1?\n"
#. popup text
-#: src/include/partitioning/ep-hd-lib.rb:762
+#: src/include/partitioning/ep-hd-lib.rb:768
msgid ""
"The disk is no longer marked for dasdfmt.\n"
"\n"
@@ -3490,7 +3591,8 @@
"iSCSI disks, BIOS RAIDs and multipath disks and their partitions.</p>\n"
msgstr ""
"<p>Aquesta visualització mostra tots els discs durs, inclosos\n"
-"els discs iSCSI, els RAID de la BIOS i els discs multicamí i les seves particions.</p>\n"
+"els discs iSCSI, els RAID de la BIOS i els discs multicamí i les seves "
+"particions.</p>\n"
#. push button text (do not translate 'SMART', it is the name of the tool)
#: src/include/partitioning/ep-hd.rb:320
@@ -3568,7 +3670,8 @@
"software RAIDs and multipath disks.</p>\n"
msgstr ""
"<p>Aquesta visualització mostra tots els dispositius\n"
-"que utilitza el disc dur seleccionat. La taula només està disponible per a RAID de BIOS, RAID de programari i discs\n"
+"que utilitza el disc dur seleccionat. La taula només està disponible per a "
+"RAID de BIOS, RAID de programari i discs\n"
"multicamí.</p>\n"
#. tab heading
@@ -3602,8 +3705,10 @@
"Linux systems with mount points. The old mount points are shown in \n"
"the table.</p>\n"
msgstr ""
-"<p>El YaST2 ha escanejat els discos durs i ha trobat un o més sistemes Linux\n"
-"amb punts de muntatge. A la llista es mostren els punts muntatge que s'han trobat.</p>\n"
+"<p>El YaST2 ha escanejat els discos durs i ha trobat un o més sistemes "
+"Linux\n"
+"amb punts de muntatge. A la llista es mostren els punts muntatge que s'han "
+"trobat.</p>\n"
#. help text, richtext format
#: src/include/partitioning/ep-import.rb:305
@@ -3654,29 +3759,30 @@
msgstr "La contrasenya donada és incorrecta."
#. Must be called before removing device.
-#: src/include/partitioning/ep-lib.rb:107
+#: src/include/partitioning/ep-lib.rb:110
msgid "Confirm Deleting Partition Used by LVM"
msgstr "Confirmeu l'eliminació de la partició usada per LVM"
-#: src/include/partitioning/ep-lib.rb:109
+#: src/include/partitioning/ep-lib.rb:112
msgid ""
"The selected partition is used by volume group \"%1\".\n"
"To keep the system in a consistent state, the following volume group\n"
"and its logical volumes will be deleted:\n"
msgstr ""
"La partició seleccionada l'està usant el grup de volum \"%1\".\n"
-"Per mantenir el sistema en un estat consistent, els següents grups de volums\n"
+"Per mantenir el sistema en un estat consistent, els següents grups de "
+"volums\n"
"i els seus volums lògics s'eliminaran:\n"
-#: src/include/partitioning/ep-lib.rb:117
+#: src/include/partitioning/ep-lib.rb:120
msgid "Delete partition \"%1\" and volume group \"%2\" now?"
msgstr "Esborrar la partició \"%1\" i el grup de volums \"%2\" ara?"
-#: src/include/partitioning/ep-lib.rb:127
+#: src/include/partitioning/ep-lib.rb:130
msgid "Confirm Deleting Partition Used by RAID"
msgstr "Confirmeu l'eliminació de la partició usada per RAID"
-#: src/include/partitioning/ep-lib.rb:129
+#: src/include/partitioning/ep-lib.rb:132
msgid ""
"The selected partition belongs to RAID \"%1\".\n"
"To keep the system in a consistent state, the following\n"
@@ -3686,24 +3792,24 @@
"Per mantenir el sistema en un estat consistent, s'esborraran\n"
" els següents dispositius RAID:\n"
-#: src/include/partitioning/ep-lib.rb:137
+#: src/include/partitioning/ep-lib.rb:140
msgid "Delete partition \"%1\" and RAID \"%2\" now?"
msgstr "Esborrar la partició \"%1\" i el RAID \"%2\" ara?"
#. YesNo popup text %1 is replaced by a disk name e.g. /dev/hda
-#: src/include/partitioning/ep-lib.rb:207
+#: src/include/partitioning/ep-lib.rb:210
msgid "Really delete all partitions on %1?"
msgstr "Esteu segur que voleu suprimir totes les particions a %1?"
#. ///////////////////////////////////////////////////
#. now delete partition!!
#. YesNo popup text, %1 is replaced by a device name e.g. /dev/hda1
-#: src/include/partitioning/ep-lib.rb:259
+#: src/include/partitioning/ep-lib.rb:262
msgid "Really delete %1?"
msgstr "Esteu segur que voleu suprimir %1?"
#. YesNo popup. %1 is path to a file
-#: src/include/partitioning/ep-lib.rb:273
+#: src/include/partitioning/ep-lib.rb:276
msgid ""
"\n"
"Should the loop file %1 also be removed?\n"
@@ -3713,7 +3819,7 @@
#. Guarantee some minimal share (1%) of total graph width to the segment.
#. Prevents small partitions e.g. swaps from disappearing completely.
-#: src/include/partitioning/ep-lib.rb:340
+#: src/include/partitioning/ep-lib.rb:358
msgid "Unpartitioned"
msgstr "No partit"
@@ -3721,31 +3827,31 @@
#. or the end of the disk if
#. 1. end +1th cyl is not the next one
#. 2. end cyl is not the same as the next one (yeah, partitions may share a cylinder)
-#: src/include/partitioning/ep-lib.rb:443
+#: src/include/partitioning/ep-lib.rb:461
msgid "Unallocated"
msgstr "No assignat"
-#: src/include/partitioning/ep-lib.rb:482
+#: src/include/partitioning/ep-lib.rb:500
msgid "<p>No changes to partitioning.</p>"
msgstr "<p>Sense canvis de particionament.</p>"
-#: src/include/partitioning/ep-lib.rb:484
+#: src/include/partitioning/ep-lib.rb:502
msgid "<p>Changes to partitioning:</p>"
msgstr "<p>Canvis de particionament:</p>"
-#: src/include/partitioning/ep-lib.rb:487
+#: src/include/partitioning/ep-lib.rb:505
msgid "<p>No changes to storage settings.</p>"
msgstr "<p>No hi ha canvis en els paràmetres d'emmagatzematge.</p>"
-#: src/include/partitioning/ep-lib.rb:489
+#: src/include/partitioning/ep-lib.rb:507
msgid "<p>Storage settings:</p>"
msgstr "<p>Paràmetres d'emmagatzematge:</p>"
-#: src/include/partitioning/ep-lib.rb:498
+#: src/include/partitioning/ep-lib.rb:516
msgid "<p>Packages to install:</p>"
msgstr "<p>Paquets per instal·lar:</p>"
-#: src/include/partitioning/ep-lib.rb:500
+#: src/include/partitioning/ep-lib.rb:518
msgid "<p>No packages need to be installed.</p>"
msgstr "<p>No hi ha paquets que s'hagin d'instal·lar.</p>"
@@ -3776,11 +3882,13 @@
#: src/include/partitioning/ep-loop-dialogs.rb:36
msgid ""
"\n"
-"<p><b>Path Name of Loop File:</b><br>This must be an absolute path to the file\n"
+"<p><b>Path Name of Loop File:</b><br>This must be an absolute path to the "
+"file\n"
"containing the data for the encrypted loop device to set up.</p>\n"
msgstr ""
"\n"
-"<p><b>Nom de camí del fitxer de bucle</b><br>Ha de ser un camí absolut al fitxer\n"
+"<p><b>Nom de camí del fitxer de bucle</b><br>Ha de ser un camí absolut al "
+"fitxer\n"
"que contingui les dades per configurar el dispositiu de bucle xifrat.</p>\n"
#. helptext
@@ -3792,7 +3900,8 @@
"exists, all data in it is lost.</p>\n"
msgstr ""
"\n"
-"<p><b>Crea un fitxer de bucle</b><br>Si aquesta opció està activada, el fitxer es\n"
+"<p><b>Crea un fitxer de bucle</b><br>Si aquesta opció està activada, el "
+"fitxer es\n"
"crearà amb la mida indicada al camp següent. <b>NOTA:</b> si el fitxer \n"
"ja existeix, es perdran totes les dades que contingui.</p>\n"
@@ -3818,8 +3927,10 @@
msgstr ""
"\n"
"<p><b>NOTA:</b> durant la instal·lació el YaST no pot fer cap comprovació\n"
-"de coherència de les mides dels fitxers ni dels noms dels camins perquè no es pot\n"
-"accedir al sistema de fitxers. Es crearà al final de la instal·lació. Per tant,\n"
+"de coherència de les mides dels fitxers ni dels noms dels camins perquè no "
+"es pot\n"
+"accedir al sistema de fitxers. Es crearà al final de la instal·lació. Per "
+"tant,\n"
"aneu amb compte a l'hora d'assignar les mides i els noms dels camins.</p>\n"
#. input field label
@@ -3865,12 +3976,12 @@
"el senyalador per crear-lo."
#. dialog title
-#: src/include/partitioning/ep-loop-dialogs.rb:281
+#: src/include/partitioning/ep-loop-dialogs.rb:282
msgid "Add Crypt File"
msgstr "Afegeix un fitxer crypt"
#. dialog title
-#: src/include/partitioning/ep-loop-dialogs.rb:325
+#: src/include/partitioning/ep-loop-dialogs.rb:326
msgid "Edit Crypt File %1"
msgstr "Edita el fitxer crypt %1"
@@ -4000,7 +4111,9 @@
#. pop-up dialog message part 2: %1 is vol.group name
#: src/include/partitioning/ep-lvm-dialogs.rb:118
msgid "Really delete volume group \"%1\" and all related logical volumes?"
-msgstr "Segur que voleu suprimir el grup de volums \"%1\" i tots els volums lògics que s'hi relacionen?"
+msgstr ""
+"Segur que voleu suprimir el grup de volums \"%1\" i tots els volums lògics "
+"que s'hi relacionen?"
#. error popup, %1, %2 and %3 are replaced by sizes
#: src/include/partitioning/ep-lvm-dialogs.rb:132
@@ -4008,7 +4121,8 @@
"The data entered is invalid. Insert a physical extent size larger than %1\n"
"in powers of 2, for example, \"%2\" or \"%3\""
msgstr ""
-"Les dades que heu introduït no són vàlides. Introduïu una mida física ampliada\n"
+"Les dades que heu introduït no són vàlides. Introduïu una mida física "
+"ampliada\n"
"més gran que %1 en potències de 2, per exemple, \"%2\" o \"%3\"."
#. error popup text
@@ -4042,12 +4156,14 @@
#. helptext
#: src/include/partitioning/ep-lvm-dialogs.rb:238
msgid "<p>Enter the name and physical extent size of the new volume group.</p>"
-msgstr "<p>Introduïu el nom i la mida física ampliada del grup de volums nou.</p> "
+msgstr ""
+"<p>Introduïu el nom i la mida física ampliada del grup de volums nou.</p> "
#. helptext
#: src/include/partitioning/ep-lvm-dialogs.rb:245
msgid "<p>Select the physical volumes the volume group should contain.</p>"
-msgstr "<p>Seleccioneu els volums físics que ha de contenir el grup de volums.</p>"
+msgstr ""
+"<p>Seleccioneu els volums físics que ha de contenir el grup de volums.</p>"
#. label for input field
#: src/include/partitioning/ep-lvm-dialogs.rb:283
@@ -4080,7 +4196,8 @@
#: src/include/partitioning/ep-lvm-dialogs.rb:491
msgid ""
"<p>Enter the size as well as the number and size\n"
-"of stripes for the new logical volume. The number of stripes cannot be higher\n"
+"of stripes for the new logical volume. The number of stripes cannot be "
+"higher\n"
"than the number of physical volumes of the volume group.</p>"
msgstr ""
"<p>Introduïu la mida així com també la quantitat i la mida\n"
@@ -4098,10 +4215,13 @@
"Thin Volumes cannot have a Stripe Count."
msgstr ""
"<p>Els anomenats<b>Volums Prims</b> poden ser creats\n"
-"amb una mida de volum arbitrària. L'espai necessari s'agafa segons les necessitats \n"
-"assignades per <b>Thin Pool</b>. Així podeu crear volums prims d'una mida més grossa\n"
+"amb una mida de volum arbitrària. L'espai necessari s'agafa segons les "
+"necessitats \n"
+"assignades per <b>Thin Pool</b>. Així podeu crear volums prims d'una mida "
+"més grossa\n"
"que la de Thin Pool. Evidentment, quan hi ha realment dades escrites al \n"
-"volum prim, el Thin Pool assignat ha de ser capaç d'arribar a les necessitats d'espai.\n"
+"volum prim, el Thin Pool assignat ha de ser capaç d'arribar a les "
+"necessitats d'espai.\n"
"Els Volums Prims no poden tenir Stripe Count."
#. heading for frame
@@ -4135,30 +4255,36 @@
#: src/include/partitioning/ep-lvm-dialogs.rb:778
msgid ""
"<p>You can declare the logical volume as a <b>Normal Volume</b>.\n"
-"This is the default and means plain LVM Volumes like all volumes were before the feature of <b>Thin Provisioning</b> existed.\n"
+"This is the default and means plain LVM Volumes like all volumes were before "
+"the feature of <b>Thin Provisioning</b> existed.\n"
"If in doubt this is most probably the right choice</p>"
msgstr ""
"<p>Podeu declarar el volum lògic com a <b>Volum normal</b>.\n"
-"És així per defecte i significa que els volums LVM eren com tots els volums abans que la característica de <b> Provisió Thin</b> exisistís.\n"
+"És així per defecte i significa que els volums LVM eren com tots els volums "
+"abans que la característica de <b> Provisió Thin</b> exisistís.\n"
"Si en dubteu, aquesta és probablement l'opció bona.</p>"
#. helptext
#: src/include/partitioning/ep-lvm-dialogs.rb:787
msgid ""
"<p>You can declare the logical volume as a <b>Thin Pool</b>.\n"
-"This means <b>Thin Volumes</b> allocate their needed space on demand from such a pool.</p>"
+"This means <b>Thin Volumes</b> allocate their needed space on demand from "
+"such a pool.</p>"
msgstr ""
"<p>Podeu declarar el volum lògic com a <b>Thin Pool</b>.\n"
-"Això significa que <b>Volums Prims</b> situa l'espai necessari segons les necessitats d'aquest 'pool'.</p>"
+"Això significa que <b>Volums Prims</b> situa l'espai necessari segons les "
+"necessitats d'aquest 'pool'.</p>"
#. helptext
#: src/include/partitioning/ep-lvm-dialogs.rb:794
msgid ""
"<p>You can declare the logical volume as a <b>Thin Volume</b>.\n"
-"This means the volume allocates needed space on demand from a <b>Thin Pool</b>.</p>"
+"This means the volume allocates needed space on demand from a <b>Thin Pool"
+"b>.</p>"
msgstr ""
"<p>Podeu declarar el volum lògic com a <b>Volum Prim</b>.\n"
-"Això siginifca que el volum situa l'espai necessari segons les necessitats de <b>Thin Pool</b>.</p>"
+"Això siginifca que el volum situa l'espai necessari segons les necessitats "
+"de <b>Thin Pool</b>.</p>"
#. heading for frame
#: src/include/partitioning/ep-lvm-dialogs.rb:827
@@ -4198,12 +4324,12 @@
msgstr "Pool usat"
#. dialog title, %1 is a volume group
-#: src/include/partitioning/ep-lvm-dialogs.rb:1028
+#: src/include/partitioning/ep-lvm-dialogs.rb:1029
msgid "Add Logical Volume on %1"
msgstr "Afegeix un volum lògic a %1"
#. dialog title - %1 is a logical volume name, %2 is a volume group
-#: src/include/partitioning/ep-lvm-dialogs.rb:1075
+#: src/include/partitioning/ep-lvm-dialogs.rb:1076
msgid "Edit Logical Volume %1 on %2"
msgstr "Edita el volum lògic %1 a %2"
@@ -4212,13 +4338,17 @@
msgid ""
"There are not enough suitable unused devices to create a volume group.\n"
"\n"
-"To use LVM, at least one unused partition of type 0x8e (or 0x83) or one unused\n"
+"To use LVM, at least one unused partition of type 0x8e (or 0x83) or one "
+"unused\n"
"RAID device is required. Change your partition table accordingly."
msgstr ""
-"Ni hi ha prou dispositius sense utilitzar adients per crear un grup de volums.\n"
+"Ni hi ha prou dispositius sense utilitzar adients per crear un grup de "
+"volums.\n"
"\n"
-"Per a utilitzar LVM es necessita com a mínim una partició lliure del tipus 0x8e (o 0x83) o un\n"
-"dispositiu RAID sense utilitzar. Modifiqueu la taula de particions segons calgui."
+"Per a utilitzar LVM es necessita com a mínim una partició lliure del tipus "
+"0x8e (o 0x83) o un\n"
+"dispositiu RAID sense utilitzar. Modifiqueu la taula de particions segons "
+"calgui."
#. error popup
#. error popup
@@ -4241,9 +4371,9 @@
#. error popup
#. error popup
#: src/include/partitioning/ep-lvm-lib.rb:214
-#: src/include/partitioning/ep-lvm-lib.rb:315
-#: src/include/partitioning/ep-lvm-lib.rb:367
-#: src/include/partitioning/ep-lvm-lib.rb:402
+#: src/include/partitioning/ep-lvm-lib.rb:316
+#: src/include/partitioning/ep-lvm-lib.rb:368
+#: src/include/partitioning/ep-lvm-lib.rb:403
msgid "No logical volume selected."
msgstr "No s'ha seleccionat cap volum lògic."
@@ -4253,7 +4383,7 @@
msgstr "No hi ha espai disponible al grup de volums \"%1\"."
#. error popup, %1 is replace by partition device name e.g. /dev/system/root
-#: src/include/partitioning/ep-lvm-lib.rb:326
+#: src/include/partitioning/ep-lvm-lib.rb:327
msgid ""
"The volume %1 is a thin pool.\n"
"It cannot be edited."
@@ -4262,7 +4392,7 @@
"No es pot editar."
#. error popup, %1 is replace by partition device name e.g. /dev/system/root
-#: src/include/partitioning/ep-lvm-lib.rb:337
+#: src/include/partitioning/ep-lvm-lib.rb:338
msgid ""
"The volume %1 is in use. It cannot be\n"
"edited. To edit %1, make sure it is not used."
@@ -4428,7 +4558,8 @@
"will be lost if you exit the partitioner with %1.\n"
"Really exit?"
msgstr ""
-"S'han canviat les particions o els paràmetres d'emmagatzematge. Aquests canvis es perdran si sortiu\n"
+"S'han canviat les particions o els paràmetres d'emmagatzematge. Aquests "
+"canvis es perdran si sortiu\n"
"de l'editor de particions amb %1.\n"
"Segur que voleu sortir-ne?"
@@ -4449,8 +4580,12 @@
#. fallback dialog content
#: src/include/partitioning/ep-nfs.rb:55
-msgid "NFS configuration is not available. Check yast2-nfs-client package installation."
-msgstr "La configuració NFS no està disponible. Comproveu la instal·lació del paquet yast2-nfs-client."
+msgid ""
+"NFS configuration is not available. Check yast2-nfs-client package "
+"installation."
+msgstr ""
+"La configuració NFS no està disponible. Comproveu la instal·lació del paquet "
+"yast2-nfs-client."
#. heading
#: src/include/partitioning/ep-nfs.rb:127
@@ -4481,21 +4616,26 @@
#: src/include/partitioning/ep-raid-dialogs.rb:87
msgid ""
"<p><b>RAID 0:</b> This level increases your disk performance.\n"
-"There is <b>NO</b> redundancy in this mode. If one of the drives crashes, data recovery will not be possible.</p>\n"
+"There is <b>NO</b> redundancy in this mode. If one of the drives crashes, "
+"data recovery will not be possible.</p>\n"
msgstr ""
"<p><b>RAID 0:</b> Aquest nivell incrementa el rendiment del disc.\n"
-"<b>NO</b> existeix redundància en aquest mode. La recuperació de dades no és possible si un dels discos falla.</p>\n"
+"<b>NO</b> existeix redundància en aquest mode. La recuperació de dades no és "
+"possible si un dels discos falla.</p>\n"
#. helptext
#: src/include/partitioning/ep-raid-dialogs.rb:95
msgid ""
"<p><b>RAID 1:</b> <br>This mode has the best redundancy. It can be\n"
-"used with two or more disks. This mode maintains an exact copy of all data on all\n"
-"disks. As long as at least one disk is still working, no data is lost. The partitions\n"
+"used with two or more disks. This mode maintains an exact copy of all data "
+"on all\n"
+"disks. As long as at least one disk is still working, no data is lost. The "
+"partitions\n"
"used for this type of RAID should have approximately the same size.</p>\n"
msgstr ""
"<p><b>RAID 1</b> <br>Aquest mode presenta la millor redundància. Es pot\n"
-"usar amb dos discos, o més. Aquest mode manté una còpia exacta de les dades d'un disc\n"
+"usar amb dos discos, o més. Aquest mode manté una còpia exacta de les dades "
+"d'un disc\n"
"als altres discos. Mentre funcioni almenys un disc, no es perdrà cap dada.\n"
"Les particions usades haurien de ser aproximadament de la mateixa mida.</p>\n"
@@ -4503,11 +4643,16 @@
#: src/include/partitioning/ep-raid-dialogs.rb:106
msgid ""
"<p><b>RAID 5:</b> <br>This mode combines management of a larger number\n"
-"of disks and still maintains some redundancy. This mode can be used on three disks or more.\n"
-"If one disk fails, all data is still intact. If two disks fail simultaneously, all data is lost</p>\n"
+"of disks and still maintains some redundancy. This mode can be used on three "
+"disks or more.\n"
+"If one disk fails, all data is still intact. If two disks fail "
+"simultaneously, all data is lost</p>\n"
msgstr ""
-"<p><b>RAID 5</b> <br>Aquest mode combina l'administració d'un gran nombre de discos i, malgrat tot, manté alguna redundància. Aquest mode es pot fer servir en tres discos o més.\n"
-"Si un dels discos falla, totes les dades segueixen intactes; mentre que si en fallen dos de forma simultània, es perdran totes les dades</p>\n"
+"<p><b>RAID 5</b> <br>Aquest mode combina l'administració d'un gran nombre de "
+"discos i, malgrat tot, manté alguna redundància. Aquest mode es pot fer "
+"servir en tres discos o més.\n"
+"Si un dels discos falla, totes les dades segueixen intactes; mentre que si "
+"en fallen dos de forma simultània, es perdran totes les dades</p>\n"
#. helptext
#: src/include/partitioning/ep-raid-dialogs.rb:116
@@ -4516,7 +4661,8 @@
"name for the raid. This is optional. If name is provided, the device is\n"
"available as <tt>/dev/md/<name></tt>.</p>\n"
msgstr ""
-"<p><b>Nom del RAID</b> us ofereix la possibilitat de donar un nom significatiu\n"
+"<p><b>Nom del RAID</b> us ofereix la possibilitat de donar un nom "
+"significatiu\n"
"al RAID. Això és òptim. Si li poseu un nom, el dispositiu serà\n"
"disponible com a <tt>/dev/md/<nom></tt>.</p>\n"
@@ -4524,12 +4670,16 @@
#: src/include/partitioning/ep-raid-dialogs.rb:126
msgid ""
"<p>Add partitions to your RAID. According to\n"
-"the RAID type, the usable disk size is the sum of these partitions (RAID0), the size\n"
-"of the smallest partition (RAID 1), or (N-1)*smallest partition (RAID 5).</p>\n"
+"the RAID type, the usable disk size is the sum of these partitions (RAID0), "
+"the size\n"
+"of the smallest partition (RAID 1), or (N-1)*smallest partition (RAID 5)."
+"p>\n"
msgstr ""
"<p>Afegiu particions al RAID. Segons el tipus de RAID,\n"
-"la mida del disc que es pot utilitzar és la suma d'aquestes particions (RAID 0), la mida\n"
-"de la partició més petita (RAID 1) o bé (N-1)*partició més petita (RAID 5).</p>\n"
+"la mida del disc que es pot utilitzar és la suma d'aquestes particions (RAID "
+"0), la mida\n"
+"de la partició més petita (RAID 1) o bé (N-1)*partició més petita (RAID 5)."
+"p>\n"
#. helptext
#: src/include/partitioning/ep-raid-dialogs.rb:136
@@ -4592,12 +4742,16 @@
#: src/include/partitioning/ep-raid-dialogs.rb:338
msgid ""
"<p><b>Chunk Size:</b><br>It is the smallest \"atomic\" mass\n"
-"of data that can be written to the devices. A reasonable chunk size for RAID 5 is 128 kB. For RAID 0,\n"
-"32 kB is a good starting point. For RAID 1, the chunk size does not affect the array very much.</p>\n"
+"of data that can be written to the devices. A reasonable chunk size for RAID "
+"5 is 128 kB. For RAID 0,\n"
+"32 kB is a good starting point. For RAID 1, the chunk size does not affect "
+"the array very much.</p>\n"
msgstr ""
"<p><b>Mida elemental:</b><br>És la massa de dades \"elemental\"\n"
-"més petita que es pot escriure als dispositius. Una mida elemental raonable per a RAID 5 és 128 KB,\n"
-"per a RAID 0, 32 KB és un bon començament. Per a RAID 1, la mida elemental no afecta gaire en l'escriptura de dades.</p>\n"
+"més petita que es pot escriure als dispositius. Una mida elemental raonable "
+"per a RAID 5 és 128 KB,\n"
+"per a RAID 0, 32 KB és un bon començament. Per a RAID 1, la mida elemental "
+"no afecta gaire en l'escriptura de dades.</p>\n"
#: src/include/partitioning/ep-raid-dialogs.rb:346
msgid "Parity Algorithm:"
@@ -4607,10 +4761,12 @@
#: src/include/partitioning/ep-raid-dialogs.rb:353
msgid ""
"The parity algorithm to use with RAID5/6.\n"
-"Left-symmetric is the one that offers maximum performance on typical disks with rotating platters.\n"
+"Left-symmetric is the one that offers maximum performance on typical disks "
+"with rotating platters.\n"
msgstr ""
"Algoritme de paritat per usar amb els RAIDS/6.\n"
-"El simètric-esquerrà és el que ofereix el màxim rendiment en discos típics amb plats rotatoris.</p>\n"
+"El simètric-esquerrà és el que ofereix el màxim rendiment en discos típics "
+"amb plats rotatoris.</p>\n"
#. helptext
#: src/include/partitioning/ep-raid-dialogs.rb:361
@@ -4643,17 +4799,17 @@
msgstr "<p>Canvieu els dispositius que s'utilitzen per al RAID.</p>"
#. dialog title
-#: src/include/partitioning/ep-raid-dialogs.rb:642
+#: src/include/partitioning/ep-raid-dialogs.rb:643
msgid "Add RAID %1"
msgstr "Afegeix el RAID %1"
#. dialog title
-#: src/include/partitioning/ep-raid-dialogs.rb:676
+#: src/include/partitioning/ep-raid-dialogs.rb:677
msgid "Resize RAID %1"
msgstr "Canvia la mida del RAID %1"
#. dialog title
-#: src/include/partitioning/ep-raid-dialogs.rb:722
+#: src/include/partitioning/ep-raid-dialogs.rb:723
msgid "Edit RAID %1"
msgstr "Edita el RAID %1"
@@ -4891,17 +5047,23 @@
msgid ""
"<p><b>Default Mount by</b> gives the mount by\n"
"method for newly created file systems. <i>Device Name</i> uses the kernel\n"
-"device name, which is not persistent. <i>Device ID</i> and <i>Device Path</i>\n"
+"device name, which is not persistent. <i>Device ID</i> and <i>Device Path"
+"i>\n"
"use names generated by udev from hardware information. These should be\n"
-"persistent but unfortunately this is not always true. Finally <i>UUID</i> and\n"
+"persistent but unfortunately this is not always true. Finally <i>UUID</i> "
+"and\n"
"<i>Volume Label</i> use the file systems UUID and label.</p>\n"
msgstr ""
"<p><b>Muntatge per defecte</b> us dóna el muntatge per\n"
-"mètode per a nous sistemes de fitxers creats. <i>Nom del dispostiu</i> usa el nom del \n"
-"dispostiu del nucli, que no és persistent. <i>ID del dispositiu</i> i <i>Camí del dispositiu</i>\n"
-"usen noms generats per udev des de la informació del maquinari. Això hauria de ser\n"
+"mètode per a nous sistemes de fitxers creats. <i>Nom del dispostiu</i> usa "
+"el nom del \n"
+"dispostiu del nucli, que no és persistent. <i>ID del dispositiu</i> i "
+"<i>Camí del dispositiu</i>\n"
+"usen noms generats per udev des de la informació del maquinari. Això hauria "
+"de ser\n"
"persistent però malauradament no sempre és així. Finalment <i>UUID</i> i\n"
-"<i>Etiqueta del volum</i> usen l'UUID i l'etiqueta dels sistemes de fitxers.</p>\n"
+"<i>Etiqueta del volum</i> usen l'UUID i l'etiqueta dels sistemes de fitxers."
+"</p>\n"
#. helptext
#: src/include/partitioning/ep-settings.rb:209
@@ -4910,19 +5072,25 @@
"system type for newly created file systems.</p>\n"
msgstr ""
"<p><b>Sistema de fitxers per defecte</b> indica\n"
-"el tipus del sistema de fitxers que s'ha d'aplicar als sistemes de fitxers nous.</p>\n"
+"el tipus del sistema de fitxers que s'ha d'aplicar als sistemes de fitxers "
+"nous.</p>\n"
#. helptext
#: src/include/partitioning/ep-settings.rb:217
msgid ""
"<p><b>Alignment of Newly Created Partitions</b>\n"
-"determines how created partitions are aligned. <b>cylinder</b> is the traditional alignment at cylinder boundaries of the disk. <b>optimal</b> aligns the \n"
+"determines how created partitions are aligned. <b>cylinder</b> is the "
+"traditional alignment at cylinder boundaries of the disk. <b>optimal</b> "
+"aligns the \n"
"partitions for best performance according to hints provided by the Linux \n"
"kernel or tries to be compatible with Windows Vista and Win 7.</p>\n"
msgstr ""
"<p><b>Alineació de les noves particions creades</b>\n"
-"determina com s'alineen les particions creades. <b>Cilindre</b> és l'alineació tradicional als límits del cilindre del disc. <b>Òptim</b> alinea les \n"
-"particions per al millor rendiment segons els indicis que proporciona el nucli de Linux \n"
+"determina com s'alineen les particions creades. <b>Cilindre</b> és "
+"l'alineació tradicional als límits del cilindre del disc. <b>Òptim</b> "
+"alinea les \n"
+"particions per al millor rendiment segons els indicis que proporciona el "
+"nucli de Linux \n"
"o prova de ser compatible amb el Windows Vista i el Win 7.</p>\n"
#. helptext
@@ -4949,7 +5117,7 @@
msgstr "<p>Aquesta vista mostra un resum de la instal·lació.</p>"
#. dialog title
-#: src/include/partitioning/ep-tmpfs-dialogs.rb:49
+#: src/include/partitioning/ep-tmpfs-dialogs.rb:50
msgid "Add tmpfs Mount"
msgstr "Afegeix muntatge tmpfs"
@@ -5014,7 +5182,8 @@
"all current changes. Really rescan unused devices?"
msgstr ""
"Si es tornen a escanejar els dispositius que no s'utilitzen,\n"
-"es cancel·laran tots els canvis actuals. Segur que voleu tornar a escanejar-los?"
+"es cancel·laran tots els canvis actuals. Segur que voleu tornar a escanejar-"
+"los?"
#. encoding: utf-8
#. Copyright (c) 2012 Novell, Inc.
@@ -5176,7 +5345,8 @@
msgstr ""
"El fitxer de patró té un format no vàlid!\n"
"\n"
-"El fitxer ha de contenir línies amb una expressió regular i un nom de classe\n"
+"El fitxer ha de contenir línies amb una expressió regular i un nom de "
+"classe\n"
"per línia. Exemple:"
#. popup text
@@ -5186,32 +5356,42 @@
#: src/modules/DualMultiSelectionBox.rb:250
msgid "Ok to match devices to classes with these patterns?"
-msgstr "Esteu d'acord d'equiparar els dispositius a classes amb aquests patrons?"
+msgstr ""
+"Esteu d'acord d'equiparar els dispositius a classes amb aquests patrons?"
#. dialog help text
#: src/modules/DualMultiSelectionBox.rb:316
msgid ""
"<p>This dialog is for defining classes for the raid devices\n"
-"contained in the raid. Available classes are A, B, C, D and E but for many cases\n"
+"contained in the raid. Available classes are A, B, C, D and E but for many "
+"cases\n"
"fewer classes are needed (e.g. only A and B). </p>"
msgstr ""
"<p>Aquest diàleg serveix per definir classes per als dispositius RAID\n"
-"continguts al RAID. Les classes disponibles són A, B, C, D i E però per a molts casos\n"
+"continguts al RAID. Les classes disponibles són A, B, C, D i E però per a "
+"molts casos\n"
"se'n necessiten menys (per exemple, només A i B). </p>"
#. dialog help text
#: src/modules/DualMultiSelectionBox.rb:325
msgid ""
"<p>You can put a device into a class by right-clicking on the\n"
-"device and choosing the appropriate class from context menu. By pressing the \n"
-"Ctrl or Shift key you can select multiple devices and put them into a class in\n"
-"one step. One can also use the buttons labeled \"%1\" to \"%2\" to put currently \n"
+"device and choosing the appropriate class from context menu. By pressing "
+"the \n"
+"Ctrl or Shift key you can select multiple devices and put them into a class "
+"in\n"
+"one step. One can also use the buttons labeled \"%1\" to \"%2\" to put "
+"currently \n"
"selected devices into this class.</p>"
msgstr ""
-"<p>Podeu posar un dispositiu dins de la classe clicant amb el botó dret sobre\n"
-"el dispositiu i escollir-ne la classe apropiada amb el menú contextual. Prement \n"
-"Ctrl o Majúscules podeu seleccionar més d'un dispositiu i posar-los en una classe\n"
-"amb un sol pas. També podeu fer servir els botons \"%1\" to \"%2\" per posar els que \n"
+"<p>Podeu posar un dispositiu dins de la classe clicant amb el botó dret "
+"sobre\n"
+"el dispositiu i escollir-ne la classe apropiada amb el menú contextual. "
+"Prement \n"
+"Ctrl o Majúscules podeu seleccionar més d'un dispositiu i posar-los en una "
+"classe\n"
+"amb un sol pas. També podeu fer servir els botons \"%1\" to \"%2\" per posar "
+"els que \n"
"ja estan seleccionats a la classe.</p>"
#. dialog help text
@@ -5237,11 +5417,15 @@
msgid ""
"<b>Interleaved</b> uses first device of class A, then first device of \n"
"class B, then all the following classes with assigned devices. Then the \n"
-"second device of class A, the second device of class B, and so on will follow."
+"second device of class A, the second device of class B, and so on will "
+"follow."
msgstr ""
-"<b>Intercalat</b> fa servir el primer dispositiu de la classe A, llavors el primer de la \n"
-"classe B, i llavors les classes següents amb els dispositius assignats. Llavors, \n"
-"el segon dispositiu de classe A, el segon dispositiu de classe B i així successivament."
+"<b>Intercalat</b> fa servir el primer dispositiu de la classe A, llavors el "
+"primer de la \n"
+"classe B, i llavors les classes següents amb els dispositius assignats. "
+"Llavors, \n"
+"el segon dispositiu de classe A, el segon dispositiu de classe B i així "
+"successivament."
#. dialog help text
#: src/modules/DualMultiSelectionBox.rb:369
@@ -5250,29 +5434,39 @@
"When you leave the pop-up the current order of the devices is used as the \n"
"order in the RAID to be created.</p>"
msgstr ""
-"Tots els dispositius sense classe es passen al final de la llista de dispositius.\n"
-"Quan sortiu del menú, l'ordre vigent de dispositius es farà servir com a odre per al RAID \n"
+"Tots els dispositius sense classe es passen al final de la llista de "
+"dispositius.\n"
+"Quan sortiu del menú, l'ordre vigent de dispositius es farà servir com a "
+"odre per al RAID \n"
"que s'ha de crear.</p>"
#. dialog help text
#: src/modules/DualMultiSelectionBox.rb:379
msgid ""
"By pressing button \"<b>%1</b>\" you can select a file that contains\n"
-"lines with a regular expression and a class name (e.g. \"sda.* A\"). All devices that match \n"
-"the regular expression will be put into the class on this line. The regular expression is \n"
+"lines with a regular expression and a class name (e.g. \"sda.* A\"). All "
+"devices that match \n"
+"the regular expression will be put into the class on this line. The regular "
+"expression is \n"
"matched against the kernel name (e.g. /dev/sda1), \n"
-"the udev path name (e.g. /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1) and the\n"
+"the udev path name (e.g. /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-"
+"part1) and the\n"
"the udev id (e.g. /dev/disk/by-id/ata-ST3500418AS_9VMN8X8L-part1). \n"
-"The first match finally determines the class if a devices name matches more then one\n"
+"The first match finally determines the class if a devices name matches more "
+"then one\n"
"regular expression.</p>"
msgstr ""
"Prement el botó \"<b>%1</b>\" podeu seleccionar un fitxer que contingui\n"
-"línies amb una expressió regular i un nom de classe (per exemple: \"sda.* A\"). Tots els dispositius que coincideixin\n"
-"amb l'expressió regular es posaran a la classe en aquesta línia. L'expressió regular es \n"
+"línies amb una expressió regular i un nom de classe (per exemple: \"sda.* A"
+"\"). Tots els dispositius que coincideixin\n"
+"amb l'expressió regular es posaran a la classe en aquesta línia. L'expressió "
+"regular es \n"
"fa coincidir amb el nom del nucli (per exemple /dev/sda1), \n"
-"el nom de ruta udev (per exemple /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1) i l'identificador\n"
+"el nom de ruta udev (per exemple /dev/disk/by-path/pci-0000:00:1f.2-"
+"scsi-0:0:0:0-part1) i l'identificador\n"
"de udev (per exemple /dev/disk/by-id/ata-ST3500418AS_9VMN8X8L-part1). \n"
-"La primera coincidència determina finalment la classe si el nom del dispositiu coincideix amb més d'una\n"
+"La primera coincidència determina finalment la classe si el nom del "
+"dispositiu coincideix amb més d'una\n"
"expressió regular.</p>"
#. headline text
@@ -5297,7 +5491,8 @@
"Invalid Size specified. Use number followed by K, M, G or %.\n"
"Value must be above 100k or between 1% and 200%. Try again."
msgstr ""
-"S'ha especificat una mida no vàlida. Feu servir un número seguit de K, M, G o %.\n"
+"S'ha especificat una mida no vàlida. Feu servir un número seguit de K, M, G "
+"o %.\n"
"El valor ha de ser superior a 100k o entre 1% i 200%. Torneu-ho a provar."
#: src/modules/FileSystems.rb:290
@@ -5308,12 +5503,15 @@
#: src/modules/FileSystems.rb:297
msgid ""
"<p><b>Tmpfs Size:</b>\n"
-"Size may be either entered as a number followed by K,M,G for Kilo-, Mega- or Gigabyte or\n"
+"Size may be either entered as a number followed by K,M,G for Kilo-, Mega- or "
+"Gigabyte or\n"
"as a number followed by a percent sign meaning percentage of memory.</p>"
msgstr ""
"<p><b>Mida de Tmpfs:</b>\n"
-"La mida es pot introduir amb un número seguit de K,M,G per a Kilo-, Mega- o Gigabyte o bé\n"
-"amb un número seguit d'un símbol de tant per cent que signifiqui el percentatge de la memòria.<p>"
+"La mida es pot introduir amb un número seguit de K,M,G per a Kilo-, Mega- o "
+"Gigabyte o bé\n"
+"amb un número seguit d'un símbol de tant per cent que signifiqui el "
+"percentatge de la memòria.<p>"
#. label text
#: src/modules/FileSystems.rb:311
@@ -5332,7 +5530,8 @@
"Enter the swap priority. Higher numbers mean higher priority.</p>\n"
msgstr ""
"<p><b>Prioritat d'intercanvi</b>\n"
-"Introduïu la prioritat d'intercanvi. Com més alt sigui el número més gran serà la prioritat.</p>\n"
+"Introduïu la prioritat d'intercanvi. Com més alt sigui el número més gran "
+"serà la prioritat.</p>\n"
#. button text
#: src/modules/FileSystems.rb:481
@@ -5343,11 +5542,13 @@
#: src/modules/FileSystems.rb:485
msgid ""
"<p><b>Mount Read-Only:</b>\n"
-"Writing to the file system is not possible. Default is false. During installation\n"
+"Writing to the file system is not possible. Default is false. During "
+"installation\n"
"the file system is always mounted read-write.</p>"
msgstr ""
"<p><b>Munta només de lectura:</b>\n"
-"escriure al sistema de fitxers no és possible. Per defecte és fals. Durant la instal·lació\n"
+"escriure al sistema de fitxers no és possible. Per defecte és fals. Durant "
+"la instal·lació\n"
"el sistema de fitxers sempre es munta com a lectura-escriptura.</p>"
#. button text
@@ -5362,7 +5563,8 @@
"Access times are not updated when a file is read. Default is false.</p>\n"
msgstr ""
"<p><b>Sense hora d'accés</b>\n"
-"L'hora de l'accés no s'actualitza quan es llegeix un fitxer. L'opció predeterminada és fals.</p>\n"
+"L'hora de l'accés no s'actualitza quan es llegeix un fitxer. L'opció "
+"predeterminada és fals.</p>\n"
#. button text
#: src/modules/FileSystems.rb:511
@@ -5376,7 +5578,8 @@
"The file system may be mounted by an ordinary user. Default is false.</p>\n"
msgstr ""
"<p><b>Pot ser muntat per un usuari</b>\n"
-"Un usuari normal pot muntar el sistema de fitxers. L'opció predeterminada és \"als\".</p>\n"
+"Un usuari normal pot muntar el sistema de fitxers. L'opció predeterminada és "
+"\"als\".</p>\n"
#. button text
#: src/modules/FileSystems.rb:528
@@ -5389,13 +5592,17 @@
"<p><b>Do Not Mount at System Start-up:</b>\n"
"The file system is not automatically mounted when the system starts.\n"
"An entry in /etc/fstab is created and the file system is mounted\n"
-"with the appropriate options when the command <tt>mount <mount point></tt>\n"
-"is entered (<mount point> is the directory to which the file system is mounted). Default is false.</p>\n"
+"with the appropriate options when the command <tt>mount <mount point>"
+"tt>\n"
+"is entered (<mount point> is the directory to which the file system is "
+"mounted). Default is false.</p>\n"
msgstr ""
"<p><b>No es munta durant l'inici del sistema</b>\n"
-"El sistema de fitxers no es munta de forma automàtica en iniciar-se el sistema.\n"
+"El sistema de fitxers no es munta de forma automàtica en iniciar-se el "
+"sistema.\n"
"S'ha creat una entrada a /etc/fstab i el sistema de fitxers es munta\n"
-"amb les opcions apropiades quan s'introdueix l'ordre <tt>mount <punt_muntatge></tt>\n"
+"amb les opcions apropiades quan s'introdueix l'ordre <tt>mount <"
+"punt_muntatge></tt>\n"
"(<punt_muntatge> és el directori on es munta el sistema de fitxers).\n"
"L'opció predeterminada és fals.</p>\n"
@@ -5428,16 +5635,20 @@
"<tt>journal</tt> -- All data is committed to the journal prior to being\n"
"written into the main file system. Highest performance impact.<br>\n"
"<tt>ordered</tt> -- All data is forced directly out to the main file system\n"
-"prior to its metadata being committed to the journal. Medium performance impact.<br>\n"
-"<tt>writeback</tt> -- Data ordering is not preserved. No performance impact.</p>\n"
+"prior to its metadata being committed to the journal. Medium performance "
+"impact.<br>\n"
+"<tt>writeback</tt> -- Data ordering is not preserved. No performance impact."
+"</p>\n"
msgstr ""
"<p><b>Mode de registre de dades:</b>\n"
"determina el mode de registre per a les dades de fitxers.\n"
"<tt>journal</tt>: les dades es desen al diari abans d'escriure's\n"
"al sistema de fitxers principal. Té un impacte alt en el rendiment.<br>\n"
"<tt>ordered</tt>: les dades s'envien directament al sistema de fitxers\n"
-"principal abans que les metadades es desin al diari. Té un impacte mitjà en el rendiment.<br>\n"
-"<tt>writeback</tt>: no es conserva l'ordre de les dades. No té impacte en el rendiment.</p>\n"
+"principal abans que les metadades es desin al diari. Té un impacte mitjà en "
+"el rendiment.<br>\n"
+"<tt>writeback</tt>: no es conserva l'ordre de les dades. No té impacte en el "
+"rendiment.</p>\n"
#. button text
#: src/modules/FileSystems.rb:606
@@ -5473,18 +5684,24 @@
msgstr "&Valor d'opció arbitrari"
#: src/modules/FileSystems.rb:647
-msgid "Invalid characters in arbitrary option value. Do not use spaces or tabs. Try again."
-msgstr "Hi ha caràcters no vàlids al valor d'opció arbitrari. No utilitzeu espais ni tabulacions. Torneu-ho a provar."
+msgid ""
+"Invalid characters in arbitrary option value. Do not use spaces or tabs. Try "
+"again."
+msgstr ""
+"Hi ha caràcters no vàlids al valor d'opció arbitrari. No utilitzeu espais ni "
+"tabulacions. Torneu-ho a provar."
#. help text, richtext format
#: src/modules/FileSystems.rb:651
msgid ""
"<p><b>Arbitrary Option Value:</b>\n"
-"In this field, type any legal mount option allowed in the fourth field of /etc/fstab.\n"
+"In this field, type any legal mount option allowed in the fourth field of /"
+"etc/fstab.\n"
"Multiple options are separated by commas.</p>\n"
msgstr ""
"<p><b>Valor d’opció arbitrari:</b>\n"
-"introduïu aquí qualsevol opció de muntatge que estigui permesa en el quart camp de /etc/fstab.\n"
+"introduïu aquí qualsevol opció de muntatge que estigui permesa en el quart "
+"camp de /etc/fstab.\n"
"Si hi ha més d’una opció, se separaran per comes.</p>\n"
#. label text
@@ -5499,7 +5716,8 @@
"Set the charset used for display of file names in Windows partitions.</p>\n"
msgstr ""
"<p><b>Conjunt de caràcters per als noms de fitxers</b>\n"
-"Definiu el conjunt de caràcters que s'utilitzarà per a mostrar els noms dels fitxers de les particions del Windows.</p>\n"
+"Definiu el conjunt de caràcters que s'utilitzarà per a mostrar els noms dels "
+"fitxers de les particions del Windows.</p>\n"
#. label text
#: src/modules/FileSystems.rb:700
@@ -5510,10 +5728,12 @@
#: src/modules/FileSystems.rb:706
msgid ""
"<p><b>Codepage for Short FAT Names:</b>\n"
-"This codepage is used for converting to shortname characters on FAT file systems.</p>\n"
+"This codepage is used for converting to shortname characters on FAT file "
+"systems.</p>\n"
msgstr ""
"<p><b>Pàgina de codis per a noms FAT curts</b>\n"
-"Aquesta pàgina de codis s'utilitza per a convertir a caràcters de noms curts en sistemes de fitxers FAT.</p>\n"
+"Aquesta pàgina de codis s'utilitza per a convertir a caràcters de noms curts "
+"en sistemes de fitxers FAT.</p>\n"
#. label text
#: src/modules/FileSystems.rb:720
@@ -5524,10 +5744,12 @@
#: src/modules/FileSystems.rb:726
msgid ""
"<p><b>Number of FATs:</b>\n"
-"Specify the number of file allocation tables in the file system. The default is 2.</p>"
+"Specify the number of file allocation tables in the file system. The default "
+"is 2.</p>"
msgstr ""
"<p><b>Nombre de FATS:</b>\n"
-"S'especifica el nombre de taules de localització de fitxers al sistema de fitxers. El valor per defecte es 2.</p>"
+"S'especifica el nombre de taules de localització de fitxers al sistema de "
+"fitxers. El valor per defecte es 2.</p>"
#. label text
#: src/modules/FileSystems.rb:735
@@ -5538,10 +5760,14 @@
#: src/modules/FileSystems.rb:746
msgid ""
"<p><b>FAT Size:</b>\n"
-"Specifies the type of file allocation tables used (12, 16, or 32-bit). If auto is specified, YaST will automatically select the value most suitable for the file system size.</p>\n"
+"Specifies the type of file allocation tables used (12, 16, or 32-bit). If "
+"auto is specified, YaST will automatically select the value most suitable "
+"for the file system size.</p>\n"
msgstr ""
"<p><b>Mida de FAT</b>\n"
-"S'especifica el tipus de taula de localització de fitxers que s'utilitza (12, 16 o 32 bit). Si s'indica Automàtic, el YaST2 selecciona automàticament el valor més adequat per a la mida del sistema de fitxers.</p>\n"
+"S'especifica el tipus de taula de localització de fitxers que s'utilitza "
+"(12, 16 o 32 bit). Si s'indica Automàtic, el YaST2 selecciona automàticament "
+"el valor més adequat per a la mida del sistema de fitxers.</p>\n"
#. label text
#: src/modules/FileSystems.rb:755
@@ -5551,7 +5777,9 @@
#. popup text
#: src/modules/FileSystems.rb:763
msgid "The minimum size for \"Root Dir Entries\" is 112. Try again."
-msgstr "La mida mínima per a \"Entrades del directori arrel\" és 112. Torneu-ho a provar."
+msgstr ""
+"La mida mínima per a \"Entrades del directori arrel\" és 112. Torneu-ho a "
+"provar."
#. help text, richtext format
#: src/modules/FileSystems.rb:767
@@ -5571,10 +5799,12 @@
#: src/modules/FileSystems.rb:787
msgid ""
"<p><b>Hash Function:</b>\n"
-"This specifies the name of the hash function to use to sort the file names in directories.</p>\n"
+"This specifies the name of the hash function to use to sort the file names "
+"in directories.</p>\n"
msgstr ""
"<p><b>Funció Hash:</b>\n"
-"especifica el nom de la funció hash que s'utilitzarà per classificar els noms de fitxers dels directoris.</p>\n"
+"especifica el nom de la funció hash que s'utilitzarà per classificar els "
+"noms de fitxers dels directoris.</p>\n"
#. label text
#: src/modules/FileSystems.rb:796
@@ -5585,10 +5815,16 @@
#: src/modules/FileSystems.rb:803
msgid ""
"<p><b>FS Revision:</b>\n"
-"This option defines the reiserfs format revision to use. '3.5' is for backwards compatibility with kernels of the 2.2.x series. '3.6' is more recent, but can only be used with kernel versions greater than or equal to 2.4.</p>\n"
+"This option defines the reiserfs format revision to use. '3.5' is for "
+"backwards compatibility with kernels of the 2.2.x series. '3.6' is more "
+"recent, but can only be used with kernel versions greater than or equal to "
+"2.4.</p>\n"
msgstr ""
"<p><b>Revisió d'FS</b>\n"
-"Aquesta opció defineix la revisió de format reiserfs que s'utilitzarà. El 3.5 s'utilitza només per tenir compatibilitat amb els nuclis de les sèries 2.2.x. El 3.6 és més recent, però només es pot fer servir amb versions del nucli iguals o superiors al 2.4.</p>\n"
+"Aquesta opció defineix la revisió de format reiserfs que s'utilitzarà. El "
+"3.5 s'utilitza només per tenir compatibilitat amb els nuclis de les sèries "
+"2.2.x. El 3.6 és més recent, però només es pot fer servir amb versions del "
+"nucli iguals o superiors al 2.4.</p>\n"
#. label text
#. label text
@@ -5600,10 +5836,14 @@
#: src/modules/FileSystems.rb:823
msgid ""
"<p><b>Block Size:</b>\n"
-"Specify the size of blocks in bytes. Valid block size values are 512, 1024, 2048 and 4096 bytes per block. If auto is selected, the standard block size of 4096 is used.</p>\n"
+"Specify the size of blocks in bytes. Valid block size values are 512, 1024, "
+"2048 and 4096 bytes per block. If auto is selected, the standard block size "
+"of 4096 is used.</p>\n"
msgstr ""
"<p><b>Mida dels blocs</b>\n"
-"Especifiqueu la mida del blocs en bytes. Les mides dels blocs vàlides són 512, 1024, 2048 i 4096 bytes per bloc. L'opció auto fa que s'utilitzi la mida de bloc predeterminada de 4096.</p>\n"
+"Especifiqueu la mida del blocs en bytes. Les mides dels blocs vàlides són "
+"512, 1024, 2048 i 4096 bytes per bloc. L'opció auto fa que s'utilitzi la "
+"mida de bloc predeterminada de 4096.</p>\n"
#. label text
#. label text
@@ -5619,7 +5859,8 @@
"This option specifies the inode size of the file system.</p>\n"
msgstr ""
"<p><b>Mida dels nodes d'identificació</b>\n"
-"Aquesta opció especifica la mida dels nodes d'identificació del sistema de fitxers.</p>\n"
+"Aquesta opció especifica la mida dels nodes d'identificació del sistema de "
+"fitxers.</p>\n"
#. label text
#: src/modules/FileSystems.rb:847
@@ -5630,10 +5871,12 @@
#: src/modules/FileSystems.rb:875
msgid ""
"<p><b>Percentage of Inode Space:</b>\n"
-"The option \"Percentage of Inode Space\" specifies the maximum percentage of space in the file system that can be allocated to inodes.</p>\n"
+"The option \"Percentage of Inode Space\" specifies the maximum percentage of "
+"space in the file system that can be allocated to inodes.</p>\n"
msgstr ""
"<b>Percentatge de mida dels nodes d'identificació</b>\n"
-"Aquesta opció especifica el màxim percentatge d'espai dels sistemes de fitxers que es pot adjudicar als nodes d'identificació.</p>\n"
+"Aquesta opció especifica el màxim percentatge d'espai dels sistemes de "
+"fitxers que es pot adjudicar als nodes d'identificació.</p>\n"
#. label text
#: src/modules/FileSystems.rb:884
@@ -5644,13 +5887,16 @@
#: src/modules/FileSystems.rb:890
msgid ""
"<p><b>Inode Aligned:</b>\n"
-"The option \"Inode Aligned\" is used to specify whether inode allocation is or\n"
+"The option \"Inode Aligned\" is used to specify whether inode allocation is "
+"or\n"
"is not aligned. By default inodes are aligned, which\n"
"is usually more efficient than unaligned access.</p>\n"
msgstr ""
"<p><b>Node alineat</b>\n"
-"Aquesta opció s'utilitza per especificar si la situació de nodes d'identificació està alineada o no.\n"
-"Per defecte, els nodes d'identificació s'alineen. L'accés alineat als nodes d'identificació\n"
+"Aquesta opció s'utilitza per especificar si la situació de nodes "
+"d'identificació està alineada o no.\n"
+"Per defecte, els nodes d'identificació s'alineen. L'accés alineat als nodes "
+"d'identificació\n"
"normalment és més eficaç que l'accés desalineat.</p>\n"
#. label text
@@ -5672,10 +5918,12 @@
#: src/modules/FileSystems.rb:934
msgid ""
"<p><b>Log Size</b>\n"
-"Set the log size (in megabytes). If auto, the default is 40% of the aggregate size.</p>\n"
+"Set the log size (in megabytes). If auto, the default is 40% of the "
+"aggregate size.</p>\n"
msgstr ""
"<p><b>Mida dels registres</b>\n"
-"Determineu la mida dels registres (en megabytes). Si escolliu Automàtic, s'establirà per defecte el 40% de la mida agregada.</p>\n"
+"Determineu la mida dels registres (en megabytes). Si escolliu Automàtic, "
+"s'establirà per defecte el 40% de la mida agregada.</p>\n"
#. label text
#: src/modules/FileSystems.rb:942
@@ -5705,17 +5953,24 @@
"RAID stripe as its argument.</p>\n"
msgstr ""
"<p><b>Longitud del pas en blocs</b>\n"
-"Determineu les opcions relacionades amb RAID per al sistema de fitxers. Actualment, l'únic argument que s'admet\n"
-"és \"pas\", en anglès \"stride\", que pren com a argument el nombre de blocs en un llistat RAID.</p>\n"
+"Determineu les opcions relacionades amb RAID per al sistema de fitxers. "
+"Actualment, l'únic argument que s'admet\n"
+"és \"pas\", en anglès \"stride\", que pren com a argument el nombre de blocs "
+"en un llistat RAID.</p>\n"
#. help text, richtext format
#: src/modules/FileSystems.rb:987
msgid ""
"<p><b>Block Size:</b>\n"
-"Specify the size of blocks in bytes. Valid block size values are 1024, 2048, and 4096 bytes per block. If auto is selected, the block size is determined by the file system size and the expected use of the file system.</p>\n"
+"Specify the size of blocks in bytes. Valid block size values are 1024, 2048, "
+"and 4096 bytes per block. If auto is selected, the block size is determined "
+"by the file system size and the expected use of the file system.</p>\n"
msgstr ""
"<p><b>Mida dels blocs</b>\n"
-"Especifiqueu la mida dels blocs en bytes. Les mides dels blocs vàlides són 1024, 2048 i 4096 bytes per bloc. Si hi ha seleccionada l'opció automàtica, es determina la mida de bloc segons la mida del sistema de fitxers i l'ús que se n'espera.</p>\n"
+"Especifiqueu la mida dels blocs en bytes. Les mides dels blocs vàlides són "
+"1024, 2048 i 4096 bytes per bloc. Si hi ha seleccionada l'opció automàtica, "
+"es determina la mida de bloc segons la mida del sistema de fitxers i l'ús "
+"que se n'espera.</p>\n"
#. label text
#: src/modules/FileSystems.rb:996
@@ -5731,16 +5986,23 @@
"bytes-per-inode ratio, the fewer inodes will be created. Generally, this\n"
"value should not be smaller than the block size of the file system, or else\n"
"too many inodes will be created. It is not possible to expand the number of\n"
-"inodes on a file system after its creation. So be sure to enter a reasonable\n"
+"inodes on a file system after its creation. So be sure to enter a "
+"reasonable\n"
"value for this parameter.</p>\n"
msgstr ""
"<p><b>Bytes per node d'identificació</b>\n"
-"Especifiqueu el coeficient de bytes per node d'identificació. El YaST2 crea un node d'identificació per a cada\n"
-"<bytes-per-node-i> bytes d'espai al disc. Com més gran sigui la relació bytes per node d'identificació,\n"
-" es crearan menys nodes d'identificació. Generalment, aquest valor no ha de ser més petit que la mida\n"
-"del bloc del sistema de fitxers ja que, en cas contrari, es crearia una gran quantitat de nodes d'identificació.\n"
-"Tingueu en compte que no es pot modificar el número de nodes d'identificació d'un sistema de fitxers un cop\n"
-"aquest s'ha creat, per la qual cosa heu de comprovar que introduïu el valor correcte per al paràmetre.</p>\n"
+"Especifiqueu el coeficient de bytes per node d'identificació. El YaST2 crea "
+"un node d'identificació per a cada\n"
+"<bytes-per-node-i> bytes d'espai al disc. Com més gran sigui la "
+"relació bytes per node d'identificació,\n"
+" es crearan menys nodes d'identificació. Generalment, aquest valor no ha de "
+"ser més petit que la mida\n"
+"del bloc del sistema de fitxers ja que, en cas contrari, es crearia una gran "
+"quantitat de nodes d'identificació.\n"
+"Tingueu en compte que no es pot modificar el número de nodes d'identificació "
+"d'un sistema de fitxers un cop\n"
+"aquest s'ha creat, per la qual cosa heu de comprovar que introduïu el valor "
+"correcte per al paràmetre.</p>\n"
#. label text
#: src/modules/FileSystems.rb:1018
@@ -5753,14 +6015,23 @@
"The \"Percentage of Blocks Reserved for root\" value is incorrect.\n"
"Allowed are float numbers no larger than 99 (e.g. 0.5).\n"
msgstr ""
-"El valor per al \"percentatge de blocs reservats per l'arrel\" és incorrecte.\n"
+"El valor per al \"percentatge de blocs reservats per l'arrel\" és "
+"incorrecte.\n"
"Es permeten valors amb coma flotant entre 0 i 99 (per exemple 0.5). \n"
#. xgettext: no-c-format
#. help text, richtext format
#: src/modules/FileSystems.rb:1033
-msgid "<p><b>Percentage of Blocks Reserved for root:</b> Specify the percentage of blocks reserved for the super user. The default is computed so that normally 1 Gig is reserved. Upper limit for reserved default is 5.0, lowest reserved default is 0.1.</p>"
-msgstr "<p><b>Percentatge de blocs reservats per a l'usuari primari:</b> s'especifica el percentatge de blocs reservats per al superusuari. El valor per defecte es calcula de manera que es reserva normalment 1 GB. El límit màxim per defecte és 5.0 i el mínim, és 0.1.</p>"
+msgid ""
+"<p><b>Percentage of Blocks Reserved for root:</b> Specify the percentage of "
+"blocks reserved for the super user. The default is computed so that normally "
+"1 Gig is reserved. Upper limit for reserved default is 5.0, lowest reserved "
+"default is 0.1.</p>"
+msgstr ""
+"<p><b>Percentatge de blocs reservats per a l'usuari primari:</b> "
+"s'especifica el percentatge de blocs reservats per al superusuari. El valor "
+"per defecte es calcula de manera que es reserva normalment 1 GB. El límit "
+"màxim per defecte és 5.0 i el mínim, és 0.1.</p>"
#. checkbox text
#: src/modules/FileSystems.rb:1042
@@ -5788,7 +6059,8 @@
"Enables use of hashed b-trees to speed up lookups in large directories.</p>\n"
msgstr ""
"<p><b>Índex de directori:</b>\n"
-"Permet utilitzar arbres B amb la funció hash per accelerar les cerques en directoris grans.</p>\n"
+"Permet utilitzar arbres B amb la funció hash per accelerar les cerques en "
+"directoris grans.</p>\n"
#. label text
#: src/modules/FileSystems.rb:1096
@@ -5799,27 +6071,54 @@
#: src/modules/FileSystems.rb:1103
msgid ""
"<p><b>No Journal:</b>\n"
-"Suppressed use of journaling on filesystem. Only activate this when you really\n"
+"Suppressed use of journaling on filesystem. Only activate this when you "
+"really\n"
"know what you are doing.</p>\n"
msgstr ""
"<p><b>Sense historial:</b>\n"
-"Ús suprimit de l'historial al sistema de fitxers. Activeu això només quan estigueu segurs\n"
+"Ús suprimit de l'historial al sistema de fitxers. Activeu això només quan "
+"estigueu segurs\n"
"del que feu.</p>\n"
#. this version makes some problems with interpreter, above lookup/add is OK
-#: src/modules/Partitions.rb:930
-msgid "Operation not permitted on disk %1.\n"
+#: src/modules/Partitions.rb:936
+#, fuzzy
+msgid "Operation not permitted on disk %{device}.\n"
msgstr "Operació no permesa al disc %1.\n"
-#. popup text %1 is replaced by disk name e.g. /dev/hda
-#: src/modules/Partitions.rb:940
+#. popup text %{device} is replaced by disk name e.g. /dev/hda
+#: src/modules/Partitions.rb:941
+#, fuzzy
msgid ""
"\n"
-"The partitioning on your disk %1 is either not readable or not \n"
+"It's not supported by the partitioning tool parted to change\n"
+"the partition table on your disk %{device}\n"
+"(the disk is LDL formatted).\n"
+"\n"
+"You can use the partitions on disk %{device} as they are or\n"
+"format them and assign mount points, but you cannot add,\n"
+"resize, or remove partitions from that disk here.\n"
+msgstr ""
+"\n"
+"L'eina de partició Parted utilitzada per canviar\n"
+"la taula de particions no pot llegir les particions\n"
+"del disc dur %1 o bé la taula de particions que hi ha no és admesa.\n"
+"\n"
+"Es poden usar les particions del disc %1 tal com estan o \n"
+"les podeu formatar i assignar-los punts de muntatge, però no podeu\n"
+"afegir, editar, redimensionar ni suprimir particions\n"
+"del disc.\n"
+
+#. popup text %{device} is replaced by disk name e.g. /dev/hda
+#: src/modules/Partitions.rb:953
+#, fuzzy
+msgid ""
+"\n"
+"The partitioning on your disk %{device} is either not readable or not \n"
"supported by the partitioning tool parted used to change the\n"
"partition table.\n"
"\n"
-"You can use the partitions on disk %1 as they are or\n"
+"You can use the partitions on disk %{device} as they are or\n"
"format them and assign mount points, but you cannot add, edit, \n"
"resize, or remove partitions from that disk here.\n"
msgstr ""
@@ -5833,15 +6132,16 @@
"afegir, editar, redimensionar ni suprimir particions\n"
"del disc.\n"
-#. popup text %1 is replaced by disk name e.g. /dev/dasda
-#: src/modules/Partitions.rb:958
+#. popup text %{device} is replaced by disk name e.g. /dev/dasda
+#: src/modules/Partitions.rb:965
+#, fuzzy
msgid ""
"\n"
-"The disk %1 does not contain a partition table but for\n"
+"The disk %{device} does not contain a partition table but for\n"
"compatibility the kernel has automatically generated a\n"
"partition spanning almost the entire disk.\n"
"\n"
-"You can use the partition on disk %1 as it is or\n"
+"You can use the partition on disk %{device} as it is or\n"
"format it and assign a mount point, but you cannot resize\n"
"or remove the partition from that disk here.\n"
msgstr ""
@@ -5855,7 +6155,7 @@
" redimensionar-la o eliminar-la del disc on és des d'aquí.\n"
#. popup text
-#: src/modules/Partitions.rb:977
+#: src/modules/Partitions.rb:981
msgid ""
"\n"
"\n"
@@ -5870,7 +6170,7 @@
"però aquesta acció eliminarà les dades de totes les particions del disc.\n"
#. popup text
-#: src/modules/Partitions.rb:989
+#: src/modules/Partitions.rb:991
msgid ""
"\n"
"\n"
@@ -5888,7 +6188,7 @@
#. @param integer testsize
#. @param [Symbol] used_fs
#. @param [Boolean] verbose
-#: src/modules/Storage.rb:992
+#: src/modules/Storage.rb:993
msgid "Resize Not Possible:"
msgstr "No és possible redimensionar:"
@@ -5901,7 +6201,7 @@
#. mark swap-partitions with pseudo Mountpoint swap in targetMap
#. @param [Hash{String => map}] target Disk map
#. @return [Hash{String => map}] modified target
-#: src/modules/Storage.rb:2692 src/modules/Storage.rb:3915
+#: src/modules/Storage.rb:2696 src/modules/Storage.rb:3919
msgid ""
"Could not set encryption.\n"
"System error code is %1.\n"
@@ -5914,7 +6214,7 @@
"És possible que la contrasenya d'encriptació introduïda sigui incorrecta.\n"
#. popup text
-#: src/modules/Storage.rb:3946
+#: src/modules/Storage.rb:3950
msgid ""
"The first and the second version\n"
"of the password do not match.\n"
@@ -5925,36 +6225,37 @@
"Torneu-ho a provar."
#. popup text
-#: src/modules/Storage.rb:3977
+#: src/modules/Storage.rb:3981
msgid ""
"The password may only contain the following characters:\n"
"0..9, a..z, A..Z, and any of \"@#* ,.;:._-+=!$%&/|?{[()]}^\\<>\".\n"
"Try again."
msgstr ""
"La contrasenya només pot contenir els caràcters següents:\n"
-"del 0 al 9, la A a la Z, majúscules i minúscules, a més de qualsevol dels signes \"@#* ,.;:._-+!$%&/|?{[()]}^\\<>\".\n"
+"del 0 al 9, la A a la Z, majúscules i minúscules, a més de qualsevol dels "
+"signes \"@#* ,.;:._-+!$%&/|?{[()]}^\\<>\".\n"
"Torneu-ho a provar."
#. Label: get password for encrypted volume
#. Please use newline if label is longer than 40 characters
-#: src/modules/Storage.rb:4031
+#: src/modules/Storage.rb:4035
msgid "&Enter Encryption Password:"
msgstr "&Introduïu la clau de xifratge:"
#. Clear password fields on every round.
-#: src/modules/Storage.rb:4090
+#: src/modules/Storage.rb:4094
msgid "Provide Password"
msgstr "Introduïu la contrasenya"
-#: src/modules/Storage.rb:4109
+#: src/modules/Storage.rb:4113
msgid "The following encrypted volumes are already available."
msgstr "Els següents volums encriptats ja estan disponibles."
-#: src/modules/Storage.rb:4124
+#: src/modules/Storage.rb:4128
msgid "Encrypted Volume Activation"
msgstr "Activació del volum encriptat"
-#: src/modules/Storage.rb:4128
+#: src/modules/Storage.rb:4132
msgid ""
"The following volumes contain an encryption signature but the \n"
"passwords are not yet known.\n"
@@ -5966,12 +6267,12 @@
"Cal saber-ne les contrasenyes si es necessiten els volums o bé durant\n"
"una actualització o bé si conenten un volum físic LVM encriptat."
-#: src/modules/Storage.rb:4140
+#: src/modules/Storage.rb:4144
msgid "Do you want to provide encryption passwords?"
msgstr "Voleu proporcionar contrasenyes d'encriptació?"
#. text in help field
-#: src/modules/Storage.rb:4197
+#: src/modules/Storage.rb:4201
msgid ""
"Enter encryption password for any of the\n"
"devices in the locked devices list.\n"
@@ -5982,69 +6283,71 @@
"Es provarà la contrasenya per a tots els dispositius."
#. header text
-#: src/modules/Storage.rb:4203
+#: src/modules/Storage.rb:4207
msgid "Enter Encryption Password"
msgstr "Introduïu la contrasenya del xifratge"
-#: src/modules/Storage.rb:4206
+#: src/modules/Storage.rb:4210
msgid "There are no encrypted volume to unlock."
msgstr "No hi ha cap volum encriptat per desbloquejar."
#. label text, multiple device names follow
-#: src/modules/Storage.rb:4219
+#: src/modules/Storage.rb:4223
msgid "Provide password for any of the following devices:"
msgstr "Introduïu la contrasenya per a qualsevol dels dispositius següents:"
#. label text, one device name follows
-#: src/modules/Storage.rb:4222
+#: src/modules/Storage.rb:4226
msgid "Provide password for the following device:"
msgstr "Introduïu la contrasenya per al dispositiu següent:"
-#: src/modules/Storage.rb:4235
+#: src/modules/Storage.rb:4239
msgid "Trying to unlock encrypted volumes..."
msgstr "Provant de desbloquejar els volums encriptats..."
-#: src/modules/Storage.rb:4259
+#: src/modules/Storage.rb:4263
msgid "Password did not unlock any volume."
msgstr "La contrasenya no ha desbloquejat cap volum."
-#: src/modules/Storage.rb:4345
+#: src/modules/Storage.rb:4349
msgid "IDE Disk"
msgstr "Disc IDE"
-#: src/modules/Storage.rb:4351
+#: src/modules/Storage.rb:4355
msgid "SCSI Disk"
msgstr "Disc SCSI"
-#: src/modules/Storage.rb:4357
+#: src/modules/Storage.rb:4361
msgid "Disk"
msgstr "Disc"
-#: src/modules/Storage.rb:4385
+#: src/modules/Storage.rb:4389
msgid "DM RAID"
msgstr "DM RAID"
-#: src/modules/Storage.rb:4398
+#: src/modules/Storage.rb:4402
msgid "MD RAID"
msgstr "MD RAID"
#. TODO: more informative error message, but the Package module does
#. not provide anything
#. TRANSLATORS: error popup
-#: src/modules/Storage.rb:4893
+#: src/modules/Storage.rb:4897
msgid "Installing required packages failed."
msgstr "Ha fallat la instal·lació de paquets requerits."
-#: src/modules/Storage.rb:4894 src/modules/StorageClients.rb:159
+#: src/modules/Storage.rb:4898 src/modules/StorageClients.rb:159
msgid "Continue despite the error?"
msgstr "Voleu continuar malgrat l'error?"
#. TRANSLATORS: error popup
-#: src/modules/Storage.rb:5252
-msgid "Partitions cannot be created since other partitions on the disk are used."
-msgstr "No es poden crear particions ja que hi ha altres particions del disc en ús."
+#: src/modules/Storage.rb:5262
+msgid ""
+"Partitions cannot be created since other partitions on the disk are used."
+msgstr ""
+"No es poden crear particions ja que hi ha altres particions del disc en ús."
-#: src/modules/Storage.rb:5278
+#: src/modules/Storage.rb:5288
msgid ""
"\n"
"Device %1 cannot be modified because it contains activated swap\n"
@@ -6054,7 +6357,7 @@
"No es pot modificar el dispositiu %1 perquè conté una partició\n"
"d'intercanvi activa necessària per executar la instal·lació.\n"
-#: src/modules/Storage.rb:5292
+#: src/modules/Storage.rb:5302
msgid ""
"\n"
"Device %1 cannot be modified because it contains the installation\n"
@@ -6064,7 +6367,7 @@
"No es pot modificar el dispositiu %1 perquè conté les dades\n"
"necessàries per fer la instal·lació.\n"
-#: src/modules/Storage.rb:5321
+#: src/modules/Storage.rb:5331
msgid ""
"\n"
"Device %1 cannot be removed because it contains activated swap\n"
@@ -6074,7 +6377,7 @@
"No es pot eliminar el dispositiu %1 perquè conté una partició\n"
"d'intercanvi activa necessària per executar la instal·lació.\n"
-#: src/modules/Storage.rb:5330
+#: src/modules/Storage.rb:5340
msgid ""
"\n"
"Device %1 cannot be removed because it contains the installation\n"
@@ -6084,7 +6387,7 @@
"No es pot eliminar el dispositiu %1 perquè conté les dades\n"
"necessàries per fer la instal·lació.\n"
-#: src/modules/Storage.rb:5359
+#: src/modules/Storage.rb:5369
msgid ""
"\n"
"Device %1 cannot be removed because this would indirectly change\n"
@@ -6096,18 +6399,19 @@
"indirecta el dispositiu %2, que conté una partició d'intercanvi activa \n"
"necessària per executar la instal·lació.\n"
-#: src/modules/Storage.rb:5370
+#: src/modules/Storage.rb:5380
msgid ""
"\n"
"Device %1 cannot be removed because this would indirectly change\n"
"device %2, which contains data needed to perform the installation.\n"
msgstr ""
"\n"
-"No es pot eliminar el dispositiu %1 perquè es modificaria de manera indirecta\n"
+"No es pot eliminar el dispositiu %1 perquè es modificaria de manera "
+"indirecta\n"
"el dispositiu %2, que conté les dades necessàries per fer la instal·lació.\n"
#. the check for verbose is needed for calls from StorageProposal (see bnc#871779)
-#: src/modules/Storage.rb:5392
+#: src/modules/Storage.rb:5402
msgid ""
"\n"
"Partition %1 cannot be removed since other partitions on the\n"
@@ -6118,18 +6422,18 @@
"disc %2 en ús.\n"
#. FIXME: please, add description of the list that is returned by this function.
-#: src/modules/Storage.rb:5481
+#: src/modules/Storage.rb:5491
msgid "Nothing assigned as root filesystem!"
msgstr "No hi ha res assignat com a sistema de fitxers arrel!"
-#: src/modules/Storage.rb:5482
+#: src/modules/Storage.rb:5492
msgid "Installation will most certainly fail fatally!"
msgstr "Segur que la instal·lació fallarà fatalment!"
#. Set rather than Add, there might be some packs left over
#. from previous 'MakeProposal' we don't need now
#. This also covers the case when AddPackagesList returns [] or nil
-#: src/modules/Storage.rb:6032
+#: src/modules/Storage.rb:6042
msgid "Adding the following resolvables failed: %1"
msgstr "Ha fallat l'addició dels següents elements: %1"
@@ -6239,7 +6543,8 @@
"the system. This field can be empty, e.g. for multipath disks."
msgstr ""
"L'opció <b>Bus</b> indica de quina manera es connecta el dispositiu\n"
-"al sistema. Aquest camp pot ser buit, per exemple, en el cas de discs multicamí."
+"al sistema. Aquest camp pot ser buit, per exemple, en el cas de discs "
+"multicamí."
#. helptext for table column and overview entry
#: src/modules/StorageFields.rb:239
@@ -6386,23 +6691,29 @@
#: src/modules/StorageFields.rb:346
msgid ""
"<b>Mount by</b> indicates how the file system\n"
-"is mounted: (Kernel) by kernel name, (Label) by file system label, (UUID) by\n"
+"is mounted: (Kernel) by kernel name, (Label) by file system label, (UUID) "
+"by\n"
"file system UUID, (ID) by device ID, and (Path) by device path.\n"
msgstr ""
"L'opció <b>Muntat per</b> indica com està muntat\n"
-"el sistema de fitxers: (Kernel) per nom de nucli, (Label) per etiqueta, (UUID) per UUID de sistema de fitxers, (ID) per identificador del dispositiu i (Path) per camí al dispositiu.\n"
+"el sistema de fitxers: (Kernel) per nom de nucli, (Label) per etiqueta, "
+"(UUID) per UUID de sistema de fitxers, (ID) per identificador del dispositiu "
+"i (Path) per camí al dispositiu.\n"
#. helptext for table column and overview entry
#: src/modules/StorageFields.rb:356
msgid ""
"A question mark (?) indicates that\n"
"the file system is not listed in <tt>/etc/fstab</tt>. It is either mounted\n"
-"manually or by some automount system. When changing settings for this volume\n"
+"manually or by some automount system. When changing settings for this "
+"volume\n"
"YaST will not update <tt>/etc/fstab</tt>.\n"
msgstr ""
"Un símbol d'interrogant (?) indica que\n"
-"el sistema de fitxers no està llistat a <tt>/etc/fstab</tt>. O bé està muntat\n"
-"manualment o per un sistema d'automuntatge. Quan es canviïn els paràmetres d'aquest volum\n"
+"el sistema de fitxers no està llistat a <tt>/etc/fstab</tt>. O bé està "
+"muntat\n"
+"manualment o per un sistema d'automuntatge. Quan es canviïn els paràmetres "
+"d'aquest volum\n"
"el YaST no actualitzarà el contingut de <tt>/etc/fstab</tt>.\n"
#. helptext for table column and overview entry
@@ -6418,7 +6729,8 @@
#: src/modules/StorageFields.rb:374
msgid ""
"An asterisk (*) after the mount point\n"
-"indicates a file system that is currently not mounted (for example, because it\n"
+"indicates a file system that is currently not mounted (for example, because "
+"it\n"
"has the <tt>noauto</tt> option set in <tt>/etc/fstab</tt>)."
msgstr ""
"Un asterisc (*) després del punt de muntatge\n"
@@ -6487,7 +6799,8 @@
"logical volumes and, if greater than one, the stripe size in parenthesis.\n"
msgstr ""
"L'opció <b>Bandes</b> mostra el nombre de bandes\n"
-"dels volums lògics LVM i, si és més gran que 1, també mostra la mida de la banda entre parèntesis.\n"
+"dels volums lògics LVM i, si és més gran que 1, també mostra la mida de la "
+"banda entre parèntesis.\n"
#. helptext for table column and overview entry
#: src/modules/StorageFields.rb:439
@@ -6523,7 +6836,8 @@
"e.g. RAID or LVM. If not, this column is empty.\n"
msgstr ""
"L'opció <b>Usat per</b> mostra si un dispositiu\n"
-"l'utilitzen, per exemple, el RAID o l'LVM. Si no utilitzeu cap d'aquests gestors, és normal que sigui buida.\n"
+"l'utilitzen, per exemple, el RAID o l'LVM. Si no utilitzeu cap d'aquests "
+"gestors, és normal que sigui buida.\n"
#. helptext for table column and overview entry
#: src/modules/StorageFields.rb:469
@@ -6782,95 +7096,108 @@
#. enable snapshots for root volume if desired
#. penalty for not having separate /home
-#: src/modules/StorageProposal.rb:4560 src/modules/StorageProposal.rb:5683
-msgid "Resize impossible due to inconsistent file system. Try checking file system under Windows."
-msgstr "No es pot redimensionar a causa d'incoherències al sistema de fitxers. Comproveu el sistema de fitxers des del Windows."
+#: src/modules/StorageProposal.rb:4579 src/modules/StorageProposal.rb:5702
+msgid ""
+"Resize impossible due to inconsistent file system. Try checking file system "
+"under Windows."
+msgstr ""
+"No es pot redimensionar a causa d'incoherències al sistema de fitxers. "
+"Comproveu el sistema de fitxers des del Windows."
-#. TRANSLATORS: checkbox text
-#: src/modules/StorageProposal.rb:6179
-msgid "Create &LVM-based Proposal"
-msgstr "Crea una proposta basada en &LVM"
-
-#. TRANSLATORS: checkbox text
-#: src/modules/StorageProposal.rb:6194
-msgid "Encr&ypt Volume Group"
-msgstr "Encr&ipta el grup de volum"
-
#. TRANSLATORS: combobox label
-#: src/modules/StorageProposal.rb:6212
+#: src/modules/StorageProposal.rb:6217
msgid "File System for Root Partition"
msgstr "Sistema de fitxers per a la partició arrel"
#. TRANSLATORS: combobox label
-#: src/modules/StorageProposal.rb:6259
+#: src/modules/StorageProposal.rb:6264
msgid "File System for Home Partition"
msgstr "Sistema de fitxers per a la partició home"
#. TRANSLATORS: checkbox text
-#: src/modules/StorageProposal.rb:6277
+#: src/modules/StorageProposal.rb:6282
msgid "Enlarge &Swap for Suspend"
msgstr "Engrandir la &swap per posar el sistema en suspens"
-#: src/modules/StorageProposal.rb:6287
+#: src/modules/StorageProposal.rb:6292
msgid "Proposal Settings"
msgstr "Proposta de configuracions"
#. TRANSLATORS: help text
-#: src/modules/StorageProposal.rb:6302
+#: src/modules/StorageProposal.rb:6307
msgid ""
-"<p>To create an LVM-based proposal, choose the corresponding button. The\n"
-"LVM-based proposal can be encrypted.</p>\n"
+"<p>Choose <b>Partition-based Proposal</b> if you don't want to use LVM.\n"
+"Choose <b>LVM-based Proposal</b> for plain LVM and <b>Encrypted LVM-based\n"
+"Proposal</b> if you want your system to be encrypted.</p>"
msgstr ""
-"<p>Per crear una proposta basada en LVM, trieu el botó corresponent.\n"
-"La proposta basada en LVM pot ser encriptada.</p>\n"
#. TRANSLATORS: help text
-#: src/modules/StorageProposal.rb:6309
+#: src/modules/StorageProposal.rb:6315
msgid ""
"<p>The filesystem for the root partition can be selected with the\n"
"corresponding combo box. With the filesystem BtrFS the proposal can\n"
"enable automatic snapshots with snapper. This will also increase the\n"
"size for the root partition.</p>"
msgstr ""
-"<p>El sistema de fitxers per a la partició d'arrel es pot seleccionar a través\n"
-"del corresponent menú desplegable. Amb el sistema de fitxers BtrFS la proposta pot\n"
+"<p>El sistema de fitxers per a la partició d'arrel es pot seleccionar a "
+"través\n"
+"del corresponent menú desplegable. Amb el sistema de fitxers BtrFS la "
+"proposta pot\n"
"habilitar instantànies automàtiques amb l'snapper. Això també incrementarà\n"
"la mida de la partició d'arrel.</p>"
#. TRANSLATORS: help text
-#: src/modules/StorageProposal.rb:6318
+#: src/modules/StorageProposal.rb:6324
msgid ""
"<p>The proposal can create a separate home partition. The filesystem for\n"
"the home partition can be selected with the corresponding combo box.</p>"
msgstr ""
"<p>La proposta pot crear una partició home separada. El sistema de fitxers\n"
-"per a la partició home es pot seleccionar per mitjà del corresponent menú desplegable.</p>"
+"per a la partició home es pot seleccionar per mitjà del corresponent menú "
+"desplegable.</p>"
#. TRANSLATORS: help text
-#: src/modules/StorageProposal.rb:6325
+#: src/modules/StorageProposal.rb:6331
msgid ""
"<p>The swap partition can be made large enough to be used to suspend\n"
"the system to disk in most cases.</p>"
msgstr ""
-"<p>La partició d'intercanvi es pot fer prou grossa per posar el sistema en suspensió\n"
+"<p>La partició d'intercanvi es pot fer prou grossa per posar el sistema en "
+"suspensió\n"
"al disc en la majoria de casos.</p>"
-#: src/modules/StorageProposal.rb:6350
+#: src/modules/StorageProposal.rb:6356
msgid "Enter your password for the proposal encryption."
msgstr "Introduïu la contrasenya per a la proposta d'encriptació."
#. Label: get password for user root
#. Please use newline if label is longer than 40 characters
-#: src/modules/StorageProposal.rb:6357
+#: src/modules/StorageProposal.rb:6363
msgid "Password:"
msgstr "Contrasenya:"
#. Label: get same password again for verification
#. Please use newline if label is longer than 40 characters
-#: src/modules/StorageProposal.rb:6368
+#: src/modules/StorageProposal.rb:6374
msgid "Reenter the password for verification:"
msgstr "Torneu a introduir la contrasenya per verificar-la:"
+#. Clear password fields on every round.
+#: src/modules/StorageProposal.rb:6572
+#, fuzzy
+msgid "&Partition-based Proposal"
+msgstr "&Basada en particions"
+
+#: src/modules/StorageProposal.rb:6574
+#, fuzzy
+msgid "&LVM-based Proposal"
+msgstr "Crea una proposta basada en &LVM"
+
+#: src/modules/StorageProposal.rb:6576
+#, fuzzy
+msgid "&Encrypted LVM-based Proposal"
+msgstr "Crea una proposta basada en &LVM"
+
#. encoding: utf-8
#. Copyright (c) 2012 Novell, Inc.
#.
@@ -6914,7 +7241,17 @@
msgid "Visible Information on Storage Devices:"
msgstr "Informació visible dels dispositius d'emmagatzematge:"
+#~ msgid "Encr&ypt Volume Group"
+#~ msgstr "Encr&ipta el grup de volum"
+
#~ msgid ""
+#~ "<p>To create an LVM-based proposal, choose the corresponding button. The\n"
+#~ "LVM-based proposal can be encrypted.</p>\n"
+#~ msgstr ""
+#~ "<p>Per crear una proposta basada en LVM, trieu el botó corresponent.\n"
+#~ "La proposta basada en LVM pot ser encriptada.</p>\n"
+
+#~ msgid ""
#~ "Warning: There is no partition mounted as /boot.\n"
#~ "To boot from your hard disk, a small /boot partition\n"
#~ "(approx. %1) is required. Consider creating one.\n"
@@ -6924,12 +7261,15 @@
#~ "Really use the setup without /boot partition?\n"
#~ msgstr ""
#~ "Atenció: no existeix cap partició muntada com a /boot.\n"
-#~ "Si voleu fer l'arrencada des del disc dur necessitareu una petita partició /boot (d'aproximadament %1).\n"
+#~ "Si voleu fer l'arrencada des del disc dur necessitareu una petita "
+#~ "partició /boot (d'aproximadament %1).\n"
#~ " Tingueu en compte que se'n poden crear.\n"
-#~ "Les particions assignades a /boot es canviaran de forma automàtica al tipus\n"
+#~ "Les particions assignades a /boot es canviaran de forma automàtica al "
+#~ "tipus\n"
#~ "0x41 PReP/CHRP.\n"
#~ "\n"
-#~ "Realment voleu fer servir aquesta configuració de la partició d'arrencada?\n"
+#~ "Realment voleu fer servir aquesta configuració de la partició "
+#~ "d'arrencada?\n"
#~ msgid ""
#~ "Warning: There is no partition of type bios_grub present.\n"
@@ -6938,7 +7278,8 @@
#~ "Really use this setup?\n"
#~ msgstr ""
#~ "Avís: No hi ha cap partició del tipus bios_grub present.\n"
-#~ "Per arrencar des d'un disc GPT fent servir el grub2 aquesta partició és necessària.\n"
+#~ "Per arrencar des d'un disc GPT fent servir el grub2 aquesta partició és "
+#~ "necessària.\n"
#~ "\n"
#~ "Realment voleu fer servir aquesta configuració?\n"
@@ -7009,18 +7350,23 @@
#~| msgid "Command line interface for the partitioner module is not available"
#~ msgid "Command line interface for the partitioner module is not available."
-#~ msgstr "La interfície de la línia d'ordres per al mòdul de partició no està disponible"
+#~ msgstr ""
+#~ "La interfície de la línia d'ordres per al mòdul de partició no està "
+#~ "disponible"
#, fuzzy
#~ msgid ""
#~ "You have mounted a partition with Btrfs to the\n"
-#~ "mount point /. This will very likely cause problems. Use a Linux file system,\n"
-#~ "such as ext3 or ext4, for this mount point or an extra partition for /boot.\n"
+#~ "mount point /. This will very likely cause problems. Use a Linux file "
+#~ "system,\n"
+#~ "such as ext3 or ext4, for this mount point or an extra partition for /"
+#~ "boot.\n"
#~ "\n"
#~ "Really use this setup?\n"
#~ msgstr ""
#~ "Heu intentat muntar una partició FAT sobre el punt de muntatge /boot.\n"
-#~ "Utilitzeu un sistema de fitxers Linux (ext2, ReiserFS..) per aquest punt de muntatge.\n"
+#~ "Utilitzeu un sistema de fitxers Linux (ext2, ReiserFS..) per aquest punt "
+#~ "de muntatge.\n"
#, fuzzy
#~ msgid "Export Device Graph..."
@@ -7052,7 +7398,8 @@
#~ "\n"
#~ "Seleccioneu Cancel·la si no teniu coneixements de com funciona.\n"
#~ "\n"
-#~ "Si continueu, el YaST2 intentarà desmuntar el dispositiu abans de suprimir-lo.\n"
+#~ "Si continueu, el YaST2 intentarà desmuntar el dispositiu abans de "
+#~ "suprimir-lo.\n"
#~ msgid ""
#~ "Unmount of %1 failed.\n"
@@ -7106,16 +7453,22 @@
#~ msgid ""
#~ "<p>\n"
-#~ "This mount point corresponds to a temporary filesystem like /tmp or /var/tmp.\n"
-#~ "You may leave the crypt password empty. If you do this, the system will create \n"
-#~ "a random password at system startup for you. This means, you will lose all \n"
+#~ "This mount point corresponds to a temporary filesystem like /tmp or /var/"
+#~ "tmp.\n"
+#~ "You may leave the crypt password empty. If you do this, the system will "
+#~ "create \n"
+#~ "a random password at system startup for you. This means, you will lose "
+#~ "all \n"
#~ "data on these filesystems at system shutdown.\n"
#~ "</p>\n"
#~ msgstr ""
#~ "<p>\n"
-#~ "Aquest punt de muntatge correspon a un sistema de fitxers temporals, com ara /tmp o /var/tmp.\n"
-#~ "Podeu deixar en blanc la contrasenya crypt. Si ho feu, el sistema us crearà \n"
-#~ "una contrasenya aleatòria a l'iniciar el sistema. Això significa que perdreu totes \n"
+#~ "Aquest punt de muntatge correspon a un sistema de fitxers temporals, com "
+#~ "ara /tmp o /var/tmp.\n"
+#~ "Podeu deixar en blanc la contrasenya crypt. Si ho feu, el sistema us "
+#~ "crearà \n"
+#~ "una contrasenya aleatòria a l'iniciar el sistema. Això significa que "
+#~ "perdreu totes \n"
#~ "les dades d'aquests sistemes de fitxers en apagar el sistema.\n"
#~ "</p>\n"
@@ -7165,9 +7518,6 @@
#~ msgid "Default Filesystem:"
#~ msgstr "Sistema de fitxers per defecte"
-#~ msgid "&Partition Based"
-#~ msgstr "&Basada en particions"
-
#~ msgid "&LVM Based"
#~ msgstr "Basada en &LVM"
@@ -7179,15 +7529,20 @@
#~ "mètode de muntatge per als sistemes de fitxers nous.</p>"
#~ msgid "<P>To use these mount points, <BR>press <B>Yes</B>.</P>"
-#~ msgstr "<P>Si voleu seguir utilitzant aquests punts de muntatge <BR>premeu el botó <B>Sí</B>.</P>"
+#~ msgstr ""
+#~ "<P>Si voleu seguir utilitzant aquests punts de muntatge <BR>premeu el "
+#~ "botó <B>Sí</B>.</P>"
#~ msgid "<P>To ignore these mount points, <BR> press <B>No</B>.</P>"
-#~ msgstr "<P>Si voleu ignorar aquests punts de muntatge <BR>premeu el botó <B>No</B>.</P>"
+#~ msgstr ""
+#~ "<P>Si voleu ignorar aquests punts de muntatge <BR>premeu el botó <B>No"
+#~ "B>.</P>"
#~ msgid ""
#~ "Would you like to use these mount points\n"
#~ "for your new installation?"
-#~ msgstr "Voleu fer servir aquests punts de muntatge per a la instal·lació nova?"
+#~ msgstr ""
+#~ "Voleu fer servir aquests punts de muntatge per a la instal·lació nova?"
#~ msgid ""
#~ "A previous system with the following mount points was detected:\n"