Hi! I do have some problems configuring SuSEfirewall2 for Samba client+server use. My machine is connected to a router and so is other machine. Does somebody see what I am doing wrong? FW_QUICKMODE="no" FW_DEV_EXT="eth-id-00:0d:87:39:28:9c" FW_DEV_INT="" FW_DEV_DMZ="" FW_ROUTE="no" FW_MASQUERADE="no" FW_MASQ_DEV="$FW_DEV_EXT" FW_MASQ_NETS="" FW_PROTECT_FROM_INTERNAL="yes" FW_AUTOPROTECT_SERVICES="yes" FW_SERVICES_EXT_TCP="1214 4662 6882 microsoft-ds netbios-dgm netbios-ns netbios-ssn ssh" FW_SERVICES_EXT_UDP="" FW_SERVICES_EXT_IP="" FW_SERVICES_DMZ_TCP="" FW_SERVICES_DMZ_UDP="" FW_SERVICES_DMZ_IP="" FW_SERVICES_INT_TCP="139 445" FW_SERVICES_INT_UDP="137 138" FW_SERVICES_INT_IP="" FW_SERVICES_QUICK_TCP="" FW_SERVICES_QUICK_UDP="" FW_SERVICES_QUICK_IP="" FW_TRUSTED_NETS="" FW_ALLOW_INCOMING_HIGHPORTS_TCP="no" FW_ALLOW_INCOMING_HIGHPORTS_UDP="DNS" FW_SERVICE_AUTODETECT="yes" FW_SERVICE_DNS="no" FW_SERVICE_DHCLIENT="no" FW_SERVICE_DHCPD="no" FW_SERVICE_SQUID="no" FW_SERVICE_SAMBA="yes" FW_FORWARD="" FW_FORWARD_MASQ="" FW_REDIRECT="" FW_LOG_DROP_CRIT="no" FW_LOG_DROP_ALL="no" FW_LOG_ACCEPT_CRIT="no" FW_LOG_ACCEPT_ALL="no" FW_KERNEL_SECURITY="yes" FW_STOP_KEEP_ROUTING_STATE="no" FW_ALLOW_PING_FW="yes" FW_ALLOW_PING_DMZ="no" FW_ALLOW_PING_EXT="no" FW_ALLOW_FW_TRACEROUTE="yes" FW_ALLOW_FW_SOURCEQUENCH="yes" FW_ALLOW_FW_BROADCAST="no" FW_IGNORE_FW_BROADCAST="yes" FW_ALLOW_CLASS_ROUTING="no" FW_CUSTOMRULES="" FW_REJECT="no" FW_HTB_TUNE_DEV="" FW_SERVICES_EXT_RPC="" FW_SERVICES_DMZ_RPC="" FW_SERVICES_INT_RPC="" FW_ANTISPOOF="no" FW_IPv6="" FW_IPv6_REJECT_OUTGOING="yes" FW_IPSEC_TRUST="no" FW_LOG="" FW_SERVICES_DROP_EXT="" FW_SERVICES_REJECT_EXT="0/0,tcp,113" FW_LOG_LIMIT=""