Hello Togan, hello List,
Hello list,
I require a little bit of your help. My Router/Gateway runs with SuSE 8.1 Professional. I installed VMWare from CD. The VMWare Guest-System is W2k-Pro and within this, Overnet/Emule is installed. My Router has two network cards, one for LAN one for DSL. My home network is through the Router and SuSEfirewall masqueraded/protected. Respective a TCP/UDP Port is forwarded to the Guest-System. The NIC's from the Guestsystem are bridged to eth0, the internal nic. Is this a problem with the modules from vmware network system or did I overlook something in SuSEfirewall2? Goes the traffic for vmware through pre/postrouting?
What does the logs say they should be telling you why susefirewall is not letting the traffic
The logs says nothing (nothing was droped,rejected,etc...)
Have you defined the guest OS subnet somehere in the firewall configuration ie FW_MASQ_NETS or FW_TRUSTED_NET
Yes and the guest OS is in the same subnet and also on the same interface as the real test-pc. My config follows: ################################################################ ## Snipp ####################################################### ################################################################ FW_DEV_INT="eth0" FW_DEV_DMZ="" FW_DEV_EXT="ppp0" FW_ROUTE="yes" FW_MASQUERADE="yes" FW_MASQ_DEV="$FW_DEV_EXT" FW_MASQ_NETS="192.168.101.0/24" FW_PROTECT_FROM_INTERNAL="no" FW_AUTOPROTECT_SERVICES="no" FW_SERVICES_INT_TCP="" FW_SERVICES_INT_UDP="" FW_SERVICES_INT_IP="" FW_SERVICES_DMZ_TCP="" FW_SERVICES_DMZ_UDP="" FW_SERVICES_DMZ_IP="" FW_SERVICES_EXT_TCP="ssh" FW_SERVICES_EXT_UDP="123" FW_SERVICES_EXT_IP="" FW_TRUSTED_NETS="" FW_ALLOW_INCOMING_HIGHPORTS_TCP="yes" FW_ALLOW_INCOMING_HIGHPORTS_UDP="yes" FW_SERVICE_AUTODETECT="no" FW_SERVICE_DNS="yes" FW_SERVICE_DHCLIENT="no" FW_SERVICE_DHCPD="yes" FW_SERVICE_SQUID="no" FW_SERVICE_SAMBA="yes" FW_FORWARD="" FW_FORWARD_MASQ="0.0.0.0/0,192.168.101.129,tcp,60200:60209 \ 0.0.0.0/0,192.168.101.129,udp,60200:60209 \ 0.0.0.0/0,192.168.101.129,tcp,4662 \ 0.0.0.0/0,192.168.101.129,udp,4672" FW_REDIRECT="" FW_LOG_DROP_CRIT="yes" FW_LOG_DROP_ALL="yes" FW_LOG_ACCEPT_CRIT="no" FW_LOG_ACCEPT_ALL="no" FW_LOG="--log-level warning --log-tcp-options --log-ip-option --log-prefix SuSE-FW" FW_KERNEL_SECURITY="no" FW_STOP_KEEP_ROUTING_STATE="yes" FW_ALLOW_PING_FW="yes" FW_ALLOW_PING_DMZ="no" FW_ALLOW_PING_EXT="yes" FW_ALLOW_FW_TRACEROUTE="yes" FW_ALLOW_FW_SOURCEQUENCH="yes" FW_ALLOW_FW_BROADCAST="yes" FW_IGNORE_FW_BROADCAST="no" FW_ALLOW_CLASS_ROUTING="" FW_CUSTOMRULES="" FW_REJECT="yes" ################################################################ ## Snapp ####################################################### ################################################################
--
Togan Muftuoglu Unofficial SuSE FAQ Maintainer http://dinamizm.ath.cx
-- Check the headers for your unsubscription address For additional commands, e-mail: suse-security-help@suse.com Security-related bug reports go to security@suse.de, not here