Morjen Freunde ich habe gestern meine Kiste mit 9.2 neu aufgesetzt. Dann wollte ich meine DVB-T-Karte wieder in Betrieb nehmen. Also dvb installiert und gestartet. Von der mitglieferten CD die Datei /Software/Oem/PCI/App/ttlcdacc.dll in /usr/lib/hotplug/firmware/ kopiert und umbenannte in tda1004x.bin. Dann das Modul mit modprobe -q budget_ci geladen. Nun steht aber in der messages: Oct 29 02:01:12 walze kernel: saa7146: register extension 'budget_ci dvb'. Oct 29 02:01:12 walze kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5 Oct 29 02:01:12 walze kernel: saa7146: found saa7146 @ mem d0c82c00 (revision 1, irq 5) (0x13c2,0x1011). Oct 29 02:01:12 walze kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). Oct 29 02:01:13 walze kernel: cx22702: Detected Hauppauge Nova-T DVB-T - PLL Thomson DTT759x Oct 29 02:01:13 walze kernel: cx22702_validate_eeprom eeprom content is not valid Oct 29 02:01:13 walze kernel: drivers/media/dvb/frontends/dib3000mb.c: did not found a DiBCom 3000-MB. Oct 29 02:01:13 walze kernel: bt878 find by dvb adap: checking "TT-Budget/WinTV-NOVA-T PCI" Oct 29 02:01:13 walze kernel: bt878 find by dvb adap: NOT found "TT-Budget/WinTV-NOVA-T PCI" Oct 29 02:01:13 walze kernel: mt312_read: ret == -121 Oct 29 02:01:15 walze kernel: tda1004x: Detected Philips TDA10045H. Oct 29 02:01:15 walze kernel: tda1004x: Detected Philips TD1316 tuner. Oct 29 02:01:15 walze kernel: tda1004x: waiting for firmware upload... Oct 29 02:01:15 walze kernel: tda1004x: no firmware upload (timeout or file not found?) Oct 29 02:01:15 walze kernel: tda1004x: firmware upload failed Oct 29 02:01:15 walze kernel: adapter has MAC addr = 00:d0:5c:23:22:fb Es scheint also, als ob er die Firmware in einem anderen Verzeichnis sucht, als es bei 9.1 der Fall war. Kann mir jemand sagen, wie der korrekte Pfad lauten sollte?! Vielen Dank! -- Frank G. Walzebuck