Hallo Liste,
beim Brennen von CD's erhalte ich diverse Fehlermeldungen, z.B. beim Klonen
in /var/log/messages:
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:39:13 linux resmgr[1112]: disconnect from aj
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:39:13 linux resmgr[1112]: disconnect from aj
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:39:13 linux resmgr[1112]: disconnect from aj
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:39:13 linux resmgr[1112]: disconnect from aj
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
Dez 11 17:39:13 linux k3b: resmgr: server response code 502
Dec 11 17:39:13 linux resmgr[1112]: disconnect from aj
Dec 11 17:39:13 linux resmgr[1112]: accepted connection from user aj
...
...
Dec 11 17:39:28 linux resmgr[1112]: disconnect from aj
Dec 11 17:41:56 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:41:56 linux resmgr[1112]: disconnect from aj
Dec 11 17:41:58 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:41:59 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:41:59 linux resmgr[1112]: disconnect from aj
Dec 11 17:41:59 linux resmgr[1112]: accepted connection from user aj
Dec 11 17:41:59 linux resmgr[1112]: disconnect from aj
Dec 11 17:41:59 linux resmgr[1112]: disconnect from aj
Dec 11 17:42:25 linux kernel: advansys: advansys_reset: board 0: SCSI bus
reset started...
Dec 11 17:42:25 linux kernel: advansys: advansys_reset: board 0: SCSI bus
reset successful.
Im debug-Fenster von k3b steht dann:
System
-----------------------
K3b Version: 0.10.3
KDE Version: 3.1.4
QT Version: 3.2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version
(okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75
02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to .
Note: The author of cdrecord is not to be bothered with problems in this
version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : RELADR SYNC LINKED
Vendor_info : 'TEAC '
Identifikation : 'CD-R58S '
Revision : '1.0P'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 2732032 = 2668 KB
FIFO size : 4194304 = 4096 KB
Encoding speed : 433x (32421 sectors/s) for libedc from Heiko Eißfeldt
Track 01: data 394 MB
Total size: 378 MB (37:32.09) = 168907 sectors
Lout start: 379 MB (37:34/07) = 168907 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 190938
Starting to write CD/DVD at speed 8 in real RAW/RAW96R mode for single
session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
Performing OPC...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -12508 from
ATIP
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF CF 24 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.014s timeout 40s
/usr/bin/cdrecord: Could not write Lead-in.
Writing lead-in at sector -12508
write leadin data: error after 0 bytes
Writing time: 34.729s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,3,0 speed=8 -raw -clone -eject
-overburn /free/movie/k3b_image.img
readcd
-----------------------
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.25
Read speed: 7040 kB/s (CD 40x, DVD 5x).
Write speed: 0 kB/s (CD 0x, DVD 0x).
TOC len: 191. First Session: 1 Last Session: 1.
01 10 00 A0 00 00 00 00 01 00 00
01 10 00 A1 00 00 00 00 0E 00 00
01 10 00 A2 00 00 00 00 25 22 07
01 10 00 01 00 00 00 00 00 02 00
01 10 00 02 00 00 00 00 06 29 37
01 10 00 03 00 00 00 00 07 31 20
01 10 00 04 00 00 00 00 0A 08 1B
01 10 00 05 00 00 00 00 0C 0D 43
01 10 00 06 00 00 00 00 0E 2A 48
01 10 00 07 00 00 00 00 11 02 37
01 10 00 08 00 00 00 00 13 0F 16
01 10 00 09 00 00 00 00 17 23 00
01 10 00 0A 00 00 00 00 18 35 19
01 10 00 0B 00 00 00 00 1A 1B 37
01 10 00 0C 00 00 00 00 1E 16 19
01 10 00 0D 00 00 00 00 20 33 19
01 10 00 0E 00 00 00 00 23 17 25
Lead out 1: 168907
Capacity: 168907 Blocks = 337814 kBytes = 329 MBytes = 345 prMB
Sectorsize: 2048 Bytes
/usr/bin/readcd: Input/output error. read_cd: scsi sendcmd: no error
CDB: BE 00 00 00 00 00 00 00 00 F8 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
/usr/bin/readcd: read 2448 failed
/usr/bin/readcd: read 2448_16 : OK
Copy from SCSI (2,0,0) disk to file '/free/movie/k3b_image.img'
end: 168907
addr: 0 cnt: 107
addr: 107 cnt: 107
.......................
.......................
addr: 168525 cnt: 107
addr: 168632 cnt: 107
addr: 168739 cnt: 107
addr: 168846 cnt: 61
addr: 168907
Time total: 144.472sec
Read 403793.30 kB at 2795.0 kB/sec.
readcd comand:
-----------------------
/usr/bin/readcd -v dev=2,0,0 f=/free/movie/k3b_image.img -clone
ist das ein Problem von SCSI, oder hat es mit den Brennprogrammen zu tun?
Beim normalen Kopieren von CD's, beim Erstellen von Daten-CD's sowie beim
Erstellen von SVCD's gibt's analoge Probleme.
Hat jemand dazu eine Idee ?
mfg
Anne Jungblut
