On Sat, 7 Jun 2003 13:46:21 +0200 M_Kaiser@t-online.de (Michael Kaiser) wrote:
cdrecord: WARNING: Drive returns wrong startsec (0) using -150 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 26.988s timeout 200s
Ich habe noch mal ein bisschen gegoogeltund diese Anfrage gefunden, die Jörg himself wie folgt beantwortet hatte. Bloß: Wie finde ich raus, welches Prog da auf das CDRW zugreift? Ich habe ja den ominösen SuSE-Watcher im Verdacht... ````````````````````````````````````````
I'm trying to burn a music CD but cdrecord stops with a "Input/output error. write_g1: scsi sendcmd: no error"
System: AMD Athlon, 256 MB RAM, Debian Woody Linux stable, Kernel 2.4.18 Media: TDK CD-R XG for audio Recorder: Plextor 24/10/40 A
uname -a Linux debian01 2.4.18 #24 Fri Aug 30 13:05:08 CEST 2002 i686 unknown cdrecord -version Cdrecord 2.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling cdrecord -v dev=0,1,0 -dummy -audio -pad speed=24 *.wav [...] Track 08: 1 of 39 MB written (fifo 100%) [buf 59%] 16.3x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 01 6B 19 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.049s timeout 40s
The same question has been asked before.... Kill the unfriendly application that tries to access the drive while cdrecord is working. Jörg EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin ```````````````````````````````````````` -- Linux - because life is too short for reboots Michael Kaiser http://www.kaiser-detmold.de