Hi, ich habe ein Problem mit meinem neuen CD- Brenner, einem Philips16/10/40 : Hier die cdreord.out: Calling: /usr/X11R6/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,1,0" fs=16384k driveropts=burnproof -v -useinfo speed=10 -dao -eject -pad -data "/home/joern/aufheben/life-cd-joerg-braun.iso" ... scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.1.20 pregap1: -1 Cdrecord 1.11a05 (i686-suse-linux) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' Driveropts: 'burnproof' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'IDE-CD ' Identifikation : 'R/RW 16x10A ' Revision : 'B1.4' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R Drive buf size : 7521696 = 7345 KB FIFO size : 16777216 = 16384 KB Track 01: data 667 MB padsize: 30 KB Total size: 766 MB (75:53.58) = 341519 sectors Lout start: 766 MB (75:55/44) = 341519 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12294 (97:18/06) ATIP start of lead out: 359849 (79:59/74) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 359849 Blocks current: 359849 Blocks remaining: 18330 Starting to write CD/DVD at speed 8 in write mode for single session. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. cdrecord: Turning BURN-Free on BURN-Free is ON. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Currently running 'write_g1' command. Condition not caught: SCSI ALREADY RUNNING !!. Raisecond: not implemented. " Das ist schon der 2te Brenner, der diesesProblem macht, dr Brenner der eingebaut war, lief zuerst unter Win; wird da etwas initialisiert? Ich habe kein Win mehr... Danke für eure Hilfe, cu Jörn