Hi In order to reach an as wide audience as possible Ill write in english. I am trying to configure my modem on a hp omnibook xe4500 running SuSE 9.2 with the linux kernel linux-2.6.8-24.11-default on Kernel arch: i686. The modem is recognised as a "Hewlett-Packard Company M5457 AC'97 Modem Controller Configured as modem0" by YaST. It is however a hsf win modem by Conexant. For the previous versions of SuSE I had to recompile my kernel with the modem driver source code for "hsflinmodem-5.03.27". This does not work anymore as the files config.h and modversions.h are not in /usr/src/linux-2.6.8-24.11-obj/i386/default/include/linux and I cannot find them anywhere else either. Are they in another package I have to install? I have tried to link the two files with autoconf.h and version.h in the same directory respectively but this did not work. Are there precompiled hsf drivers for SuSE 9.2? I have also tried a RPM for SuSE 9.1 without sucess. I have followed the installation instructions of a Novel Technical Information Document "Manual Setup of HSF Linmodem Driver TIDSuSE44" For SuSE 9.0 but this did not work either. Is there an easier way to configure the modem? Any help would be greatly appreciated. Attaced is the connection log and a detailed description of the device as it is seen by YAST. With kind regards Wolfgang Lueck SuSE Meta pppd (smpppd-ifcfg), Version 1.50 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: lurking pppd[0]: Plugin passwordfd.so loaded. pppd[0]: Renamed interface ppp0 to modem0 pppd[0]: Using interface modem0 Status is: lurking pppd[0]: local IP address 192.168.99.1 pppd[0]: remote IP address 192.168.99.99 20: PCI 08.0: 10204 LinModem [Created at pci.273] Unique ID: RE4e.ORblcNehMB3 SysFS ID: /devices/pci0000:00/0000:00:08.0 SysFS BusID: 0000:00:08.0 Hardware Class: modem Model: "Hewlett-Packard Company M5457 AC'97 Modem Controller" Vendor: pci 0x10b9 "ALi Corporation" Device: pci 0x5457 "M5457 AC'97 Modem Controller" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x0025 Driver: "slamr" Device File: /dev/ttySL0 Device Number: char 212:0 Memory Range: 0xe0002000-0xe0002fff (rw,non-prefetchable) I/O Ports: 0x1400-0x14ff (rw) IRQ: 10 (5610 events) Requires: kernel-nongpl, smartlink-softmodem Driver Info #0: Driver Status: slamr is active Driver Activation Cmd: "modprobe slamr" Config Status: cfg=no, avail=yes, need=no, active=unknown