Mailinglist Archive: opensuse-mobile-de (385 mails)

["Koerner, Sebastian" <koerner@xxxxxxxxxxxx>]

PINGs werden von vielen Mobilfunkprovidern geblockt (bei teueren
Verbindungen wie GPRS). Merke dir eine bekannte Adresse. Z.B.

Name:    turing.suse.de
Address:  195.135.220.3
Aliases:  www.suse.de

Und versuche eine TCP Verbindung

telnet 195.135.220.3 80

> -----Original Message-----
> From: Ekkard Gerlach [mailto:suse-laptop@xxxxxxx] 
> Sent: Saturday, October 23, 2004 7:15 PM
> To: Suse Liste Laptop
> Subject: [suse-laptop] GPRS, S45, eplus: connect aber kein 
> ping moeglich

> Serial connection established.
> using channel 1
> Using interface ppp0
> Connect: ppp0 <--> /dev/ttyS0
> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x502b2a51> 
> <pcomp> <accomp>]
> rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
> sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 
> 0x502b2a51> <pcomp> <accomp>]
> rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 
> 0x502b2a51> <pcomp> <accomp>]
> rcvd [LCP ConfReq id=0x3 <mru 2000> <asyncmap 0xa0000> 
> <pcomp> <accomp> <magic 0x328d78fc> 
> <auth chap MD5>]
> sent [LCP ConfNak id=0x3 <auth pap>]
> rcvd [LCP ConfReq id=0x5 <mru 2000> <asyncmap 0xa0000> 
> <pcomp> <accomp> <magic 0x328d78fc> 
> <auth pap>]
> sent [LCP ConfAck id=0x5 <mru 2000> <asyncmap 0xa0000> 
> <pcomp> <accomp> <magic 0x328d78fc> 
> <auth pap>]
> sent [LCP EchoReq id=0x0 magic=0x502b2a51]
> cbcp_lowerup
> want: 2
> sent [PAP AuthReq id=0x1 user="eplus" password=<hidden>]
> rcvd [LCP EchoRep id=0x0 magic=0x328d78fc]
> rcvd [PAP AuthAck id=0x1 ""]
> sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
> rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
> sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
> rcvd [IPCP ConfReq id=0x1 <addr 192.168.254.254>]
> sent [IPCP ConfAck id=0x1 <addr 192.168.254.254>]
> sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
> rcvd [IPCP ConfNak id=0x2 <addr 10.129.31.200>]
> sent [IPCP ConfReq id=0x3 <addr 10.129.31.200>]
> rcvd [IPCP ConfAck id=0x3 <addr 10.129.31.200>]
> not replacing default route to eth0 [192.168.0.1]
> local  IP address 10.129.31.200
> remote IP address 192.168.254.254
> Script /etc/ppp/ip-up started (pid 18481)
> Script /etc/ppp/ip-up finished (pid 18481), status = 0x0
> sent [LCP EchoReq id=0x1 magic=0x502b2a51]
> rcvd [LCP EchoRep id=0x1 magic=0x328d78fc]
Sieht gut aus

> 
> 
> Dann habe ich unter route 
> 
> [...]
> 192.168.254.254 0.0.0.0         255.255.255.255 UH    0      
> 0        0 ppp0
> [...]
Wird IMO bei SuSE automatisch gesetzt?!