Hallo alle zusammen, ich habe an meinem Laptop ein Problem damit meine externe Firewire Platte mit Suse 9.1 (Standardinstallation) ans Laufen zu bekommen. Unter Knoppix 3.4 klappt es problemlos. Daher gehe ich davon aus, dass es auch irgendwie funzen muss. Googeln hat mir bisher auch nicht wirklich weiter geholfen. Wenn ich die Platte einhänge wird sie anscheinend erkannt. Ein less -F /var/log/messages ergibt auf jeden Fall folgendes: ---- schnipp ---- Sep 6 21:06:49 linux kernel: ohci1394: fw-host0: SelfID received, but NodeID invalid (probably new bus reset occurred): 0000FFC0 Sep 6 21:06:49 linux kernel: ieee1394: Error parsing configrom for node 0-00:1023 Sep 6 21:06:49 linux kernel: ieee1394: Node changed: 0-00:1023 -> 0-01:1023 Sep 6 21:06:55 linux kernel: ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0030e0f400204e49] Sep 6 21:06:55 linux kernel: scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices Sep 6 21:06:56 linux kernel: ieee1394: sbp2: Logged into SBP-2 device Sep 6 21:06:56 linux kernel: ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Sep 6 21:06:56 linux kernel: Vendor: SAMSUNG Model: SP1604N Rev: TM10 Sep 6 21:06:56 linux kernel: Type: Direct-Access ANSI SCSI revision: 06 Sep 6 21:06:56 linux kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Sep 6 21:06:56 linux kernel: sda: asking for cache data failed Sep 6 21:06:56 linux kernel: sda: assuming drive cache: write through Sep 6 21:06:56 linux /etc/hotplug/block.agent[6209]: try 1 while waiting for /block/sda's bus_id 1:0:0:0 Sep 6 21:06:57 linux /etc/hotplug/block.agent[6209]: try 2 while waiting for /block/sda's bus_id 1:0:0:0 Sep 6 21:06:58 linux /etc/hotplug/block.agent[6209]: try 3 while waiting for /block/sda's bus_id 1:0:0:0 Sep 6 21:06:59 linux /etc/hotplug/block.agent[6209]: try 4 while waiting for /block/sda's bus_id 1:0:0:0 Sep 6 21:07:00 linux /etc/hotplug/block.agent[6209]: try 5 while waiting for /block/sda's bus_id 1:0:0:0 Sep 6 21:07:01 linux /etc/hotplug/block.agent[6209]: new block device /block/sda Sep 6 21:07:30 linux kernel: sda:<3>ieee1394: sbp2: aborting sbp2 command Sep 6 21:07:30 linux kernel: Read (10) 00 12 a1 9e a8 00 00 08 00 Sep 6 21:08:00 linux kernel: ieee1394: sbp2: aborting sbp2 command Sep 6 21:08:00 linux kernel: Test Unit Ready 00 00 00 00 00 Sep 6 21:08:00 linux kernel: ieee1394: sbp2: aborting sbp2 command Sep 6 21:08:00 linux kernel: Read (10) 00 00 00 00 08 00 00 78 00 ---- schnapp ---- Nun habe ich zwar keine große Ahnung von Linux, aber die Platte (Samsung SP1604N) kann ich da lesen. Also gehe ich davon aus, dass die Platte erkannt ist. Ein paar Minuten nach dem Einschalten der Platte beschwert sich KDE mit folgendem Fenster und einem anderen fast gleichen: "der Ordner /media/ieee1394_sbp2-0030e0f400204e49-0-0p1 lässt sich nicht öffnen" Die Module ohci1394, ieee1394 und sbp2 sind zu sehen, wenn ich lsmod eingebe. Damit ist mein vollständiges Linux-Wissen zu diesem Thema angewandt. Ich weiß, dass ist nicht besonders viel. Falls also jemand ein gutes möglichst deutsches HowTo zu dem Thema kennt, das Problem selber schon hatte oder einfach mitfühlend ist: ich freue mich über jegliche Hilfe. Besten Dank schonmal, Stephan Berg