Hallo,
ich habe (leider) einen Gericom X5 force mit einer SMC2642W und hatte
darauf SuSE 8.2 laufen. Vorgestern hatte ich mich zu einem Update auf SuSE 9.0
entschieden und siehe da, die WLAN-Karte stellt sich quer.
Vielleicht weiß hier ja jemand Rat. Ich verwende das Modul orinoco_cs.
Klappt auch soweit alles ganz zut. Ich schiebe die Karte in das Notebook und eth1 wird angelegt:
/var/log/messages:
kernel: orinoco_cs.c 0.13b (David Gibson and others)
kernel: eth1: Station identity 001f:0006:0001:0003
kernel: eth1: Looks like an Intersil firmware version 1.3.6
kernel: eth1: Ad-hoc demo mode supported
kernel: eth1: IEEE standard IBSS ad-hoc mode supported
kernel: eth1: WEP supported, 104-bit key
kernel: eth1: MAC address 00:60:B3:6A:CA:71
kernel: eth1: Station name "Prism I"
kernel: eth1: ready
kernel: eth1: index 0x01: Vcc 3.3, irq 7, io 0x0100-0x013f
cardmgr[4265]: executing: './network start eth1'
Allerdings, wenn ich jetzt "dhcpcd eth1" eingebe:
Jan 25 17:42:12 bauni kernel: eth1: New link status: Connected (0001)
Jan 25 17:42:13 bauni kernel: NETDEV WATCHDOG: eth1: transmit timed out
Jan 25 17:42:13 bauni kernel: eth1: Tx timeout! ALLOCFID=0128, TXCOMPLFID=0000, EVSTAT=8000
Jan 25 17:42:13 bauni kernel: orinoco_lock() called with hw_unavailable (dev=c7d76800)
Jan 25 17:42:13 bauni kernel: eth1: orinoco_reset: Error -19 re-initializing firmware
Jan 25 17:42:14 bauni kernel: NETDEV WATCHDOG: eth1: transmit timed out
Jan 25 17:42:14 bauni kernel: eth1: Tx timeout! ALLOCFID=ffff, TXCOMPLFID=ffff, EVSTAT=ffff
Jan 25 17:42:14 bauni kernel: orinoco_lock() called with hw_unavailable (dev=c7d76800)
Jan 25 17:42:15 bauni kernel: NETDEV WATCHDOG: eth1: transmit timed out
Jan 25 17:42:15 bauni kernel: eth1: Tx timeout! ALLOCFID=0128, TXCOMPLFID=0000, EVSTAT=8000
Jan 25 17:42:15 bauni kernel: orinoco_lock() called with hw_unavailable (dev=c7d76800)
Jan 25 17:42:15 bauni kernel: eth1: orinoco_reset: Error -19 re-initializing firmware
So geht das dann munter weiter, bis ich das dhcp abbreche. Weiß jemand
Rat, wie ich das Problem abstellen kann? Unter SuSE 8.2 lief das irgenwie
ohne Probleme. Kernel und PCMCIA-Module sind von der SuSE.
Viele Grüße,
Christian
--
---------
Christian Baun www.bauni.de
UIN: 9107054 Tel:0170-2817531