Am Freitag, 1. August 2003 14:22 schrieb Adham Hashibon:
Thanks for the reply, here is the info which you have requested:
(I know, the machine has a strange name.....)
1. I installed Suse 8.2, then I updated the kernel from the use site, but now I am using the mantel kernel version: 2.4.21-4-athlon, I tried to compile the 2.5 and 2.6 kernels, but no success so far :-(
2.4.21-4-athlon: Did you enable CONFIG_CPU_FREQ=y in the kernel config? ( Processor type and features ---> CPU Frequency scaling ) Read Documentation/cpufreq/user-guide.txt of the kernel sources. (General setup--->ACPI Support-->Processor) I think you did. Another problem is the DSDT of your Notebook. Have a look at http://acpi.sourceforge.net/dsdt/index.php May be you have to patch the DST of your notebook. The 2.5 and 2.6 kernels may not compile because of SuSEs gcc version.
note, right now the temperature in th cpu is:
# cat /proc/acpi/thermal_zone/THRM/temperature temperature: 66 C
and the load is (from uptime): 2:10pm up 0:43, 7 users, load average: 1.45, 1.49, 1.34
2. >> cat /proc/acpi/processor/CPU0/info processor id: 0 acpi id: 0 bus mastering control: yes power management: yes throttling control: no
---------------------------^ throttling not supported!
performance management: no limit interface: no
3. cat /proc/acpi/processor/CPU0/throttling gives simply: <not supported>
4. # grep -i ACPI /var/log/boot.msg <4> BIOS-e820: 000000000bef0000 - 000000000beff000 (ACPI data) <4> BIOS-e820: 000000000beff000 - 000000000bf00000 (ACPI NVS) <7>ACPI: have wakeup address 0xc0001000 <6>ACPI: RSDP (v000 PTLTD ) @ 0x000f7450 <6>ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x0bef8bf5 <6>ACPI: FADT (v001 ATI Raptor 01540.00000) @ 0x0befee2b <6>ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x0befee9f <6>ACPI: SSDT (v001 PTLTD POWERNOW 01540.00000) @ 0x0befeec7 <6>ACPI: DSDT (v001 ATI U1_M1535 01540.00000) @ 0x00000000 <5>ACPI: BIOS passes blacklist <6>ACPI: Subsystem revision 20030522 <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10, enabled at IRQ 9) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10, disabled) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10, disabled) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 7 *11) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7) <4>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10, enabled at IRQ 9) <6>ACPI: Embedded Controller [EC0] (gpe 24) <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <notice>/etc/init.d/rc5.d/S14acpid start Loading ACPI modules (ac fan processor battery thermal button ) Starting acpid <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] <notice>'/etc/init.d/rc5.d/S14acpid start' exits with status 0
5. grep -i ACPI /var/log/messages|grep Aug Aug 1 08:02:50 pcgf83-l3 kernel: ACPI: AC Adapter [ACAD] (off-line) Aug 1 08:02:50 pcgf83-l3 kernel: ACPI: Processor [CPU0] (supports C1 C2) Aug 1 08:02:50 pcgf83-l3 insmod: ------------------^ /lib/modules/2.4.21-4-athlon/kernel/drivers/acpi/toshiba_acpi.o: init_module: No such device
I got: Aug 1 08:02:44 talentix kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 7 performance states, 8 throttling states) --------------------------------^ IMHO your Kernel does not support throttling. May be you find some hints at http://tuxmobil.org Heiner -- Heiner Kuhlmann Unter den Eichen 30, D-28857 Syke, Germany PM: heiner.kuhlmann@t-online.de Liste: list@dr-k.de