Mailinglist Archive: opensuse-mobile-de (210 mails)

< Previous Next >
Re: [suse-laptop] Dell C800
  • From: Thomas Mack <mack@xxxxxxxxxxxxxxx>
  • Date: Mon, 12 Nov 2001 09:53:12 +0100
  • Message-id: <200111120853.fAC8rCN27253@xxxxxxxxxxxxxxxxxxxxxxxx>
>From mack@xxxxxxxxxxxxxxx Mon Nov 12 09:50:27 2001
From: Thomas Mack <mack@xxxxxxxxxxxxxxx>
Date: Mon, 12 Nov 2001 09:50:22 +0100
To: mack@xxxxxxxxxxxxxxx, tschobe@xxxxxxx
Subject: Re: [suse-laptop] Dell C800

Auf Wunsch alles noch einmal in die Liste:


>> >Welcher Grafikchip ist denn in deinem Dell C800 ?

>Schick uns doch mal bitte die Ausgaben der Befehle
>
> lspci -vv
>
>und
>
> sax2 -p
>
[PCMCIA Probleme]

>Ja, das wäre sehr wichtig. Am besten schickst Du die Dateien, an denen Du
>etwas verändert hast.
>
In /etc/pcmcia/config.opts heisst die Zeile 8:

include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff

Ich habe sie geaendert in:

include port 0x100-0x4ff, port 0xc00-0xcff


In /etc/lilo.conf habe ich der append Zeile noch ein "reserve=0x800,256"
angehaengt. Vorher hiess es in Zeile 14:

append = "enableapic vga=0x3014"

Ich habe die Zeile geaendert in:

append = "enableapic vga=0x3014 reserve=0x800,256"


Die Geschichte mit den Ports werde ich noch genauer austesten, aber das wird noch
ein Weilchen dauern, zumal ich gerade keine PCMCIA Karte zur Hand habe. Das Problem
tritt nur auf, wenn man eine Karte einschiebt, bzw. beim Booten bereits eine
Karte stecken hat.


sax2 -p:

Chip: 0 is -> ATI Rage 128 Mobility MF 01:00:0 0x1002 0x4d46 AGP r128


/sbin/lspci -vv (diesmal komplett, falls noch andere Ausgaben jenseits der Graphikkarte
interessieren):

00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

00:01.0 PCI bridge: Intel Corporation: Unknown device 1131 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: e8000000-ebffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (-M) (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=10, sec-latency=32
I/O behind bridge: 0000e000-0000ffff
Memory behind bridge: f4000000-fbffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge (ICH2-M) (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100 (-M) (rev 03) (prog-if 80 [Master])
Subsystem: Intel Corporation: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at bfa0 [size=16]

00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub A) (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4541
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at dce0 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M4 AGP (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 00a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at cc00 [size=256]
Region 2: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>

02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
Subsystem: Dell Computer Corporation: Unknown device 00a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at f8ffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <available only to root>

02:06.0 Ethernet controller: 3Com Corporation 3c556 Laptop Hurricane (rev 10)
Subsystem: 3Com Corporation: Unknown device 6456
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 1250ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at f8ffdc00 (32-bit, non-prefetchable) [size=128]
Region 2: Memory at f8ffd800 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: <available only to root>

02:06.1 Communication controller: 3Com Corporation: Unknown device 1007 (rev 10)
Subsystem: 3Com Corporation: Unknown device 615b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 1250ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at f8ffd400 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f8ffd000 (32-bit, non-prefetchable) [size=128]
Capabilities: <available only to root>

02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
Subsystem: Dell Computer Corporation: Unknown device 00a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=32
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
Subsystem: Dell Computer Corporation: Unknown device 00a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=32
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

02:0f.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8027 (prog-if 10 [OHCI])
Subsystem: Dell Computer Corporation: Unknown device 00a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8ffc800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f8ff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>


Thomas Mack
TU Braunschweig, Abt. Informationssysteme

< Previous Next >
Follow Ups