Hallo, ich besitzte ein dell c800 und habe die gleichen probleme. bei sax2 bzw. beim pcmcia-karten-einschub hängt sich mein laptop immer auf. für das X problem habe ich vom suse-support eine url erhalten - ich kenne sie nicht mehr - habe mein XF86Config file aber entsprechend angepaßt, kommt gleich mit. natürlich kann darf man anschl. sax2 nicht mehr starten. hier noch die datei in der mail, wenn das atachment nicht funzt: ---begin XF86Config--- # XFree86 4.0 configuration generated by Xconfigurator Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # This loads all the modules... Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "on" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "CustomConfiguration" VendorName "Unknown" ModelName "Unknown" HorizSync 31.5 - 82.0 VertRefresh 50 - 70 EndSection Section "Device" Identifier "ATI|Rage Mobility M4 AGP" # Driver "accel" Driver "r128" BoardName "Unknown" VideoRam 32768 EndSection Section "Screen" Identifier "Screen0" Device "ATI|Rage Mobility M4 AGP" Monitor "CustomConfiguration" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1400x1050" ViewPort 0 0 EndSubsection # Subsection "Display" # Depth 32 # Modes "1280x1024" # ViewPort 0 0 # EndSubsection EndSection Section "DRI" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection ---eof--- Lennart Börjeson wrote:
Hallo,
ich habe hier ein neues Dell Latitude C810 an welchen ich habe versucht SuSE 7.2 zu installieren.
Ich habe viele Probleme, z.B. PCMCIA (bein einsetzen irgeneine Karte fängt cardmgr ein unbrechliger Sling an) und X.
Hat jemand einige hinweise?
!++ ! Lennart Börjeson ! Partner, Developer ! Cinnober Financial Technology AB ! Industrigatan 2A ! S-112 46 Stockholm ! tel: +46-8-503 047 17 ! gsm: +46-70-339 47 17 ! mailto:LennartB@cinnober.com !--
# XFree86 4.0 configuration generated by Xconfigurator Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # This loads all the modules... Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "on" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "CustomConfiguration" VendorName "Unknown" ModelName "Unknown" HorizSync 31.5 - 82.0 VertRefresh 50 - 70 EndSection Section "Device" Identifier "ATI|Rage Mobility M4 AGP" # Driver "accel" Driver "r128" BoardName "Unknown" VideoRam 32768 EndSection Section "Screen" Identifier "Screen0" Device "ATI|Rage Mobility M4 AGP" Monitor "CustomConfiguration" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1400x1050" ViewPort 0 0 EndSubsection # Subsection "Display" # Depth 32 # Modes "1280x1024" # ViewPort 0 0 # EndSubsection EndSection Section "DRI" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection